Why is the network card disabled every time the computer boots up 20

Local connection is prohibited, and after enabled, it can be used for a period of time and then cannot be disabled again. And so on and so forth. Workaround:

My Computer, Right Click, Properties. Hardware, Device Manager, Network Adapter, and then see if there's a controller 2 more than one network card ha. Usually your local connection is Local Connection 1, Local Connection 2, Local Connection 3...

This is the case. You double-click on the driver for the network card, then look at the details and remember the path to the driver. Generally in C:

Windows System32 Drivers Below Then uninstall the NIC driver, then start, run, enter regedit to start the registry, and then look for the registry"Local connection", delete them, and then go to the path of the network card driver you just remembered to delete the file. Then reboot,。。 If you have a disc driven by a network card, then you can also boot the disc.

Run the NIC driver inside the program, then use it to uninstall the NIC driver, then start, run, enter regedit to start the registry, and then look for the registry"Local connection", delete them, and then go to the path of the network card driver you just remembered to delete the file. Then reboot,。。 If you have a firewall, turn it off.

I've also tried my XP's Acer machine, call a service** and ask for it!

Cause: The NIC driver is faulty, and the NIC cannot be fully enabled when starting the computer, so you need to completely uninstall the NIC or collapsed driver and reinstall the NIC driver. The steps to completely unload the NIC driver are as follows:

1. Right-click "This Computer" and select "Manage";

2. In the list on the left, click and select "Device Manager".

3. On the information page on the right, click Network Adapter and find the network card driver.

4. Right-click the network card that needs to uninstall the driver, click and select "Uninstall Device";

5. Check "Remove the driver software of this device", click "Uninstall", you must check "Remove the driver soft round of this device", otherwise it cannot be completely uninstalled.

1. In the lower right corner of the computer, right-click on the network connection, and select Open Network and Sharing Center from the pop-up options.

2. In the network settings, click to change the settings of the suitable lifting retarder.

3. Click on the adapter bending setting and see that my wifi has been disabled.

4. Right-click on the net smile card that needs to be opened, and select Enable.

5. The disabled NIC has been enabled.

If the computer display network card is disabled, it may be that the local connection display is disabled, so the computer cannot connect to the network.

The specific steps to solve the problem are as follows:

1. Open the start menu, then open the control panel;

2. Click "View Network Status and Task Options" in the control panel to open the network settings center.

3. Click to change the adapter setting option;

4. In the local connection option, click the right mouse and select the enable option;

5. After clicking Enable, a small window will appear that is being enabled, and then it will show that it has been enabled, indicating that the computer is now available for network connection.

1. Open the desktop of the computer, click on the windows menu, and select the control panel on the right.

<>3. Then click Change adapter settings.

4. Find the wireless network connection, right-click the wireless network connection, and select Enable.

If the network card is disabled, it can be enabled by going to the Device Manager interface. Select My Computer on the desktop and click Right-click Properties to enter. Then click Device Manager to find the disabled network card, right-click and click Enable Device.

Specifically, taking the win10 operating system as an example, the network card enablement method is as follows:

1. Select My Computer on the computer desktop, right-click and select Properties to enter.

2. After entering the properties interface, click Device Manager.

3. Drop down the page in the pop-up computer device manager interface.

4. After finding the network adapter, click the arrow, and you can see that the corresponding network card has a downward arrow in the options. That is, the NIC is disabled.

5. Select the disabled NIC and right-click the Enable Device button.

6. At this time, you can see that the disabled NIC has been turned on.

How to enable the computer network card after it is disabled:

Right-click on the network connection in the lower right corner of your computer, select Open Network and Sharing Center in the pop-up options, and click Change adapter settings in the network settings.

Then right-click the disabled NIC to turn it on.

The computer often drops to disable the enabled network card.

Dear, we're happy to answer your questions. <>

<> if your computer drops frequently, disabling enabling the network card is a common solution. The specific steps are as follows:1

Tap the network icon in the bottom right corner of your computer screen to open Network & Internet Settings. 2.Click on "Change Adapter Options" and find the network card you want to disable or enable.

3.Right-click on the NIC, select the "Disable" option for the pomace, and wait a few seconds before selecting the "Enable" option. 4.

Wait for your computer to automatically reconnect to the network, or connect to the network manually. If this method doesn't work, you can also try the following:1

Update the NIC drivers. 2.Check your computer for viruses or malware.

3.Replace your wireless router or change its location to improve the strength of your wireless signal. 4.

Optimize your network connection by changing your network settings, such as changing your DNS server, changing your IP address, and more. In short, if your computer frequently drops, you can try disabling enabling the network card to solve the problem. If this doesn't work, you can try other methods to optimize your network connection.