My family has just built a villa, and it is better to use aluminum cast doors or iron zinc alloy doo

Personally, I think the iron-zinc alloy gate is better and looks more atmospheric.

The bathroom is a relatively humid environment, so the material of the bathroom door is very important, both moisture-proof and anti-corrosion. The following is an introduction to the problems that should be paid attention to in the selection of bathroom doors.

1. The wooden door cannot see water, and is easy to be damp and deformed. The advantage of wooden doors is that the style is unified, and there are more styles and colors.

2. Aluminum alloy doors are also a very common type, with sky and earth slip and hanging slip. There are many options for slippery skies, and this form of door is suitable for installation on top of the wardrobe. If it is installed in the bathroom, the floor rail is easy to rust and is not easy to take care of.

3. In the selection of bathroom doors, aluminum alloy is still very common. The aluminum alloy door has good waterproof and moisture resistance; The disadvantage is that the sealing effect is not good, and the quality of aluminum alloy on the market is difficult to guarantee.

4. If the bathroom is a bright guard, and the design is dry and wet separation, you can choose a wooden door, and pay attention to it when you usually use it.

5. If the bathroom is a secret guard, it is recommended that you choose an aluminum alloy door. The bathroom has poor air permeability, the environment of the bathroom is very humid, and it is easy to deform if you use a wooden door. Over time, the wooden door will also become moldy.

6. The moisture of the bathroom is inevitable, if the space of the bathroom is large, it is possible to design the bath, and then choose a wooden door with waterproof and anti-corrosion. Solid wood is waterproof, but it is expensive.

To sum up: it is better to install aluminum alloy doors in the bathroom.

Disclaimer: Some of the **** in this article is used in part of "Oriental IC", and any newspaper, newspaper, television station, company, organization, or individual may not use it in part or in whole without the permission of Oriental IC. Other **** networks, if they involve infringement, please contact the author to deal with and delete.

Is the zinc alloy gate or the aluminum alloy gate good! Hello, I am glad to answer your <> pro zinc alloy door is an alloy composed of zinc based on other elements. Commonly added alloying elements include aluminum, copper, magnesium, cadmium, lead, titanium and other low-temperature zinc alloys.

Zinc alloy has a low melting point and is easy to clean, with good fluidity, fusible welding, brazing and plastic processing, corrosion resistance in the atmosphere, and the residual waste is easy to remelt; However, the creep strength is low, and it is easy to cause dimensional changes due to natural aging. Prepared by melting, die-casting or pressure processing into timber. According to the manufacturing process, it can be divided into cast zinc alloy and deformed zinc alloy.

The main added elements of zinc alloy are aluminum, copper and magnesium. Zinc alloy can be divided into two categories: deformation and cast zinc alloy or fierce according to the processing technology. Cast zinc alloy has good fluidity and corrosion resistance, and is suitable for die-casting instruments, automobile parts shells, etc.

Hope mine can help you <>

Do you have any other questions?

If so, put aside the pure copper.

Regardless of the gate, it depends on one's personal will to choose one of the other three gates, because these three gates have their own advantages and disadvantages. Speaking of hardness and durability, it is inferior to stainless steel gates; When it comes to hues, it's still not as good as zinc alloy.

Of course, if the degree of rust is compared, it is still much better than zinc alloy. People say that the appearance of a self-built house in the countryside is the face, and the door is the eyes of the house, so since you have a beautiful face, you must also need a pair of bright and divine eyes. It is a metal synthesis with aluminum, copper, magnesium and other elements added to zinc, which has the advantage of being easy to shape, and is mostly used to make some elements of furniture, such as decorative parts, doorknobs and other things.

<> if it is copper, it is more textured and atmospheric. This may be the biggest reason why we fancy the zinc alloy gate, and the zinc alloy gate is also the lowest among these types of doors. The aluminum alloy door is basically not easy to maintain, and there is no way to scratch the surface, so you can only pry the installation of a new door, and the stainless steel can be repaired and burned argon arc welding on site.

Then the yard will now be fenced off, like a villa. Decide whether a house looks atmospheric enough, the door plays a very important role with humidity resistance, high temperature resistance, not easy to deform, non-combustion, corrosion resistance, lightning protection, can afford long-term use, not easy to use, suitable for various climatic environments.

It is the first choice for high-end villas that are now popular, and the surface adhesion of aluminum alloy material is higher than that of other materials, and the surface treatment is done in the later stage.

The rendering effect is also higher than that of other materials, and its corresponding specification size is not very large. Like our conventional entrance door, there are 1100 mm 2000 mm, so the stainless steel door is not rust-proof, it needs to be painted regularly, if it is the kind of thin door, you also need to worry about bumps, but the important thing is cheap, but the door has to be used for a long time, or buy a rest assured it, so it is recommended to buy a stainless steel door.

Zinc alloy gate is good. Because the service life of zinc alloy doors is longer and stronger, I think it is better to have zinc alloy gates.

Aluminum alloy gate is good. Because the aluminum alloy gate is relatively strong, it is not easy to be damaged, and it is also relatively strong.

Zinc alloy doors are better, but the quality must be guaranteed when choosing, zinc alloy doors look atmospheric, not monotonous, and much cheaper.

The aluminum alloy gate is more durable, and the pattern is also OK, the zinc alloy gate is softer, and the pattern is good-looking, but it is not durable and not collision-resistant, and the aluminum alloy gate is better in the long run.

The aluminum alloy door is good, because the aluminum alloy gate is not easy to rust after encountering water, and the aluminum alloy is very light.

1. Differences in definitions.

The bronze door is a kind of ultra-luxurious entrance. It is resplendent and calm, giving people a sense of solemnity and sacredness. The bronze door, which was often used in the depths of the house, was not only a status symbol, but also a solid barrier to protect the safety inside the door.

Cast aluminum door is the use of modern high-tech processing technology, solid cast aluminum, the whole cast molding, the manufacture of a variety of villa gates, custom villa doors are novel and beautiful, elegant and chic, luxurious and spectacular.

Second, the difference in materials.

Copper door, that is, what we call the real copper door, pure copper door, in fact, is the use of stainless steel material, or cast aluminum material as the internal filling skeleton, in the appearance of a layer of pure copper copper plate, the thickness of the copper plate can be selected, coupled with a variety of complex processes, carved out of the customer needs of the carving and carving.

The cast aluminum door is made of the whole cast aluminum solid pouring, because the color of the cast aluminum material itself is relatively monotonous, so it needs to be coated with a layer of customer-predetermined color coating on the outside, and the color can also be selected, with red, yellow and other main colors.

3. Differences in the natural environment.

Although the appearance of the copper door is gorgeous, but the door body is hollow, most of the copper door appearance is the use of glue paste copper process, in the natural environment of wind and sun, especially under the erosion of rain, it is easy to be oxidized, blackened, easy to fall off, if it will rust and break after a long time, which seriously affects its aesthetics and the overall image of the villa real estate, and will cause problems and troubles with high maintenance costs in the later stage. Cast aluminium doors require little maintenance and are a major advantage.

My suggestion is to look at the decoration style first, the Chinese style copper door European style cast aluminum door, the second is the use of the environment, coastal or cast aluminum door a little more. The third is color matching, the color of the copper door is the color that the copper itself can produce, it will not fade, the texture and luster are unique, and the cast aluminum door is painted and sprayed. Because we can produce both kinds of doors, I hope to help you.