How do I use my laptop to connect a network cable to a router?

First of all, connect the incoming cable when the broadband is installed to the LAN port (cat), and the other end is connected to the WAN port of the router.

Then call your browser, enter and enter your account password. It's all admin

After entering, go to the interface of Swift Network and click on the setup wizard on the left.

After clicking, in the interface that comes out, you can directly click Next.

Click Next Later. The default in the interface is to let the router choose the appropriate way to surf the Internet, and there is no need to change it directly to the next step.

Then there will be an account password to enter, that is, your account and password that you will be told when you install broadband, enter it directly and click Next.

Then come out of the interface and choose the one you need. Set the name and password of the router, and click Next after you have set it.

Then after clicking, an interface will come out for you to check the parameters you set, and click the save button after confirming that they are correct.

After saving, a setting status comes out, and you can check the current situation of your own settings, all of which are genuine, and at this point, the setting of the wireless router is completed.

To connect the laptop to the router with a network cable, first connect the network cable to the router and the laptop, open the laptop and enter the IP address of the router, then log in to the router account and password, click Next, set the wireless network name, restart the router, and the setting operation is completed.

A router is an important output tool for network settings, and there are many ways to set up a router. The following describes how to set up a laptop to connect a router with a network cable

1. You need to prepare a network cable for normal connection in advance, connect one end of the network cable to the LAN port of the router, and connect the other end of the network cable to the network port of the laptop.

2. After the connection is successful, open the laptop, enter the IP address of the router, and then enter the router account and password on the web interface that opens.

3. Select ADSL Virtual Dialing on the entry interface and click Next.

4. Enter the broadband account provided by the broadband operator in the Internet account number, enter the broadband password in the Internet password, and set a comprehensive wireless password with high security factor in the password.

5. Click Restart, and the laptop is connected to the router with a network cable and set successfully.

Here's how to connect your router to your computer to surf the Internet The steps are as follows:

1: After entering the computer settings, we need to select the option to click on "Network & Internet".

2: Next, we need to click to open to enter the "Network and Sharing Center" function.

3: Then click on the "Network and Sharing Center" feature to enter the "Ethernet" option.

4: Then we need to select and click into the "Properties" button.

5: Then we need to go ahead and select click into the "IPv4" option and click on the "Properties" option.

6: Finally, we just need to click on and select "Automatically get IP address" to connect the router for wired Internet access.

1. Connect your computer with the original network cable, press the win and r keys on the computer at the same time, enter cmd in the pop-up run dialog box and click OK.

2. Enter ipconfig in the pop-up command interface and press enter, remember the gateway address displayed in the current interface.

3. Disconnect the computer from the network, use a network cable to plug in the LAN port of your router and connect it to the computer.

4. Enter the IP of the router in the browser address bar of the computer, press enter and enter the password to log in.

5. After entering the router background, click on the routing settings to enter.

6. Click Internet Settings on the settings page that appears, select Automatically get IP address and click the Save button.

7. Then click on the wireless settings, check the box to turn on the wireless function and broadcast, enter the wireless signal name and password and click Save.

8. Click DHCP server again, check the enable DHCP function and click Save.

9. Finally, click LAN port settings, and modify the IP address of the router to be different from the gateway noted before, such as 192 168 0 1 and click Save.

10. At this time, you can use the network cable that can access the Internet to plug into the WAN port of the router.

11. Click on the network status in the background of the router to see that the wireless router has been connected to the network and is ready to use.

If the computer and the wireless router are connected through wifi, the wireless network may be unstable, at this time, we use the network cable to connect the router and the computer to provide a smoother network, so that we can reduce the occurrence of drops when playing games, before installation, use a pen and paper to record your broadband dial-up account and password (generally given to you by the telecommunications company), and then write down the information behind the router, mainly remember the IP, username and password.

Here's how to set it up step by step:

Plug in the power supply of the router, the indicator light on the router is on, and connect the WAN port of the router to the cat with a network cable.

Plug one end of another network cable into the LAN hole of the router (there are generally 4 LAN holes, you can plug it into one of them), and plug the other end into the computer, (at this time, there is one more indicator on the router, for example: you plug in 3 holes, then the indicator light of 3 will be on, if it is not lit, it may be that your network cable is not plugged in).

After all the network cables are plugged in, there is a small computer icon in the lower right corner of the computer.

The next thing is to set up the router, if the router has been set up, you can skip this process, open a window on the computer, it can be my computer or a browser, enter the IP just written down on the back of the router in the address bar, and a window will pop up for you to enter the account number and password after entering the car (if there is no window to enter the account and password, it means that it has not been connected, and then check the previous one.)

Enter the account and password you just wrote down on the back of the router, and a page will appear after entering, and then set up the router to surf the Internet.

1.Change the local connection to automatically obtain the IP address.

2.The broadband network cable is connected to the "wan" port on the router, and the port of the router is connected to the network cable port behind the computer host from left to right. 3.Open the browser and enter the password of the router is admin

4.Go to the router settings screen, select the PPPoE (ADSL virtual dialing) method, enter your home account and password, and confirm.

5.Then set the SSID, encryption method, and password.

6.Save, restart. The router is set up.

Answer: Whether you connect the router and the computer by wired or wireless means, you need to set the IP address in the computer and set it to automatically obtain it, so that the computer can access the Internet through the router. It is also possible to set it manually, but it is easy for ordinary users to make mistakes, so it is recommended to use the automatic acquisition method to automatically obtain the IP address and DNS address from the DHCP server of the router.

Step 2: Connect wired.

The wired connection method is generally suitable for setting up the router for the first time, or when accessing the Internet on a desktop computer. Generally, there are 5 network cable interfaces on the routers used in the family, and these 5 network cable interfaces are divided into 2 categories, one is the WAN port (some brands of routers are also called Internet ports), and there is only one WAN port; The other type is the LAN port, there are 4 LAN interfaces, and some routers have their numbers on them.

When connecting the router and the computer with a network cable, the router can only view the LAN port, any of the 4 LAN ports can be, do not plug in the WAN port, there is no communication between the computer and the router, and it is even more impossible to access the Internet through the router.

Step 3: Connect wirelessly.

The wireless connection method is suitable for the wireless router where Wi-Fi is turned on, and the user knows the SSID (name) and password of the wireless network. The method is very cheap, click on the wireless connection in the lower right corner of the laptop, then find the wireless network name of your router, click on the connection, and enter the password in the pop-up dialog box to connect successfully.

The computer can be connected to the LAN port. Generally, the broadband of the router is plugged into the WLAN port, and the LAN wired port can be plugged into the LAN port. If you can't get up, you can change the network cable to try, or check whether the laptop wired network card driver is installed.

In fact, there is no special situation for connecting the router and the computer with a network cable, you can directly connect the network port of the laptop and the LAN port of the router with the network cable, and the rest depends on the settings of the router, for example, if you don't open DHCP, you need to manually set the IP address.

Just connect the network cable from the computer to the router. Plug it in and you're ready to go. The router exchanges data directly with the computer.

Give him the network cable, plug it into the computer, and connect the router to use.

When you plug in the router, you should first check whether your network cable is connected incorrectly. Generally, if the connection method is correct, you plug in the router and connect to your computer, and the speed should be fine.

Then you have to check whether your computer's network card program is installed, or whether there is a problem with the network card, which is generally invalid, and there is no problem with connecting the network cable directly.

Your computer won't connect. In this case, it is a problem with your computer, you can check it, your local connection, whether the settings are consistent with the router, the network card driver, whether it is correct, if it still doesn't work, then consider it, redo a system, the above methods are not good, just consider whether it is a hardware network card problem. It is recommended to go to a computer store to deal with it.

The most professional way is to run cmd in the start menu in the lower left corner,Spell (ping) the route and the external network,You can find out whether you are connected to the network,This is a little complicated to see if the network is up and down,Can it be spelled。

If you use a route to dial, see if the route is connected to the Internet, click on the network connection in the lower right corner, see if there is up and down, no, there may be a wrong password, check it again, if you don't know, enter the route settings or check it. That's right,The most professional way is to run cmd in the start menu in the lower left corner,Spell (ping) the route and the external network,You can find out whether you are connected to the network,This is a little complicated to see if the network is up and down,Can you spell through,As above。

Probably you have disabled the local connection or just don't have a driver.

Hello, first confirm that the network card driver is installed, and whether the local connection is turned on after the plug is generally an icon in the lower right corner, right-click on the property, and then the protocol, and then manually set the IP, the IP can refer to other computers in the dormitory.

The general format is casual (greater than 10 and less than 255) below.