What should I do if the broadband is disconnected on the wireless network connection of the computer

There are the following types of wireless automatic disconnection of notebooks:

1. My Computer--Properties--Device Manager--Network Adapter, select a wireless network card, and double-click it. Then for the "Power Management" item, remove the check box in front of "Allow the computer to shut down this device to save power".

2. The time limit for wireless routing DHCP to automatically assign IP, the default route is 24 hours, that is, the IP validity period automatically assigned to you by the route is 24 hours. If you change its settings to a super short time, it will often be disconnected.

3. Poor routing quality, poor signal, or poor wireless signal of the notebook, but in this case, the average person understands how many squares the signal has, and there is no need to ask people, just get close to the wireless routing and strengthen the signal strength.

It's hard to say, there are many kinds of problems, such as first checking the signal strength to see if the signal strength is stable. Secondly, it is necessary to check the channel interference to see if there is signal interference nearby, and to see the way of wireless encryption, to see whether it is rubbed against the network, or there may be software and hardware problems of the computer system itself, and there may be a full signal grid, but there are many examples that cannot be linked, such as the wireless of the router has sensitivity, as well as the transmitting power, and the wireless network card of the computer also has sensitivity and transmitting power, such as the transmitting power of the wireless router is large, but the sensitivity is average, then the signal can be transmitted, and you can also receiveHowever, your computer's wireless network card has limited transmitting power, and the router cannot receive it, which will also cause a network outage.

If a power amplifier is used, it can also cause the network to disconnect if it is not used properly.

Also, if the bandwidth load is large, or the router CPU is full, or other problems can also cause network outages.

Intranet ARP attacks can also cause network disconnections.

In short, there are too many network disconnection problems that cannot be described clearly, and you first need to understand your specific situation before you can analyze it specifically.

If you have experience, you can exclude them one by one according to the method of exclusion.

To understand the cause of the outage, it is necessary to understand these parameters.

Tools Materials: Win8, Computer.

1. First, find the network in the desktop of the computer, right-click to open it.

2. After opening, click on the Network and Sharing Center at the top.

3. Then click on the slag lore in the network and sharing center to change the option of adapter equipment, and enter the next setting interface.

4. In this way, you will enter the settings window of the network connection, and find the wireless network in it, that is, WLAN.

5. Right-click this option, click on the block in the pop-up window to disable, so that you can disconnect the computer wireless network.

Dear, I'm glad to answer for you! When your computer network connection is disconnected, you can try the following steps:1

Check your network equipment: Make sure your router, modem, or other network device is up and running without malfunctions or power outages. Try restarting these devices and you may be able to resolve some common network issues.

2.Check the network connection: The circle core makes sure that the network connection between the computer and the router is working.

Check that the Ethernet or Wi-Fi connection is connected and turned on. If it's a wired connection, make sure the Ethernet cable is plugged in correctly. 3.

Reconnect to the network: Disable and re-enable the network connection on your computer by right-clicking the network icon, selecting "Disable" and then "Enable". This will try to re-establish the network connection.

4.Update network drivers: Go to your device manufacturer's official repertoire** and install the latest network drivers, which will help fix software issues related to network connectivity.

If the above methods still do not solve the problem, you may need to contact your ISP (Internet Service Provider) or technical support for further assistance. They can remotely access your network devices and resolve the issue, or provide other appropriate solutions. 

Hello, dear. If your computer network connection has been disconnected, you can try the following steps to fix the problem: Check your physical connection:

Make sure that the physical connection between your computer and your router or modem is working. Check that the network cable or wireless connection is plugged in correctly and that there is no looseness or damage. Restart the Nianpi network device:

Shut down your router, modem, and computer and wait a few minutes before restarting them. Start the modem first, then the router, and finally the computer. This can help refresh network settings and fix temporary issues.

Check network settings: Check that your computer's network settings are configured correctly. You can do this by opening the Control Panel (Windows) or System Preferences (Mac)."Network settings"to check.

Make sure your network connection type (wired or wireless) is enabled and check that the IP address and DNS server settings are correct. Reconnect to your wireless network: If you're using a wireless connection, try reconnecting your wireless network.

Find the wireless network icon in the taskbar or system tray, then select the network you want to connect to, and enter the correct password. Update drivers: Check that your PC's network adapter drivers are updated to the latest version.

You can visit the official website of your PC manufacturer or network adapter manufacturer and install the latest drivers. Check your firewall and security software for elevation returns: Some firewalls or security software prevent your computer from connecting to the network.

You can disable your firewall or security software and check if your network connection is restored. If the network is restored, you will need to adjust the settings of your firewall or security software to allow network access. Contact your network service provider

If you have tried the above steps and still can't fix the network connection issue, it is due to an issue with your Internet Service Provider (ISP). Please contact your ISP and report your connectivity issue to them for further support and solutions.