Dell notebook Inspiron 5442win10 system is not smooth

Updated on number 2024-05-24
5 answers
  1. Anonymous users2024-02-11

    Let's change the system. No, add a hardware configuration.

  2. Anonymous users2024-02-10

    1. If you have removable storage media (such as optical discs, portable hard disks, USB flash drives, etc.), unplug them and restart them.

    2. If this is still the case, go to the motherboard settings, check the following items in turn, and operate:

    1 Check to see if the motherboard has detected the drive correctly. If not, turn on the unit after power off and reseat the hard drive.

    2 Confirm that the motherboard has detected the hard disk, and then see if the hard disk is the first boot device. If not, set the hard drive as the first boot device.

    3 Save UEFI (BIOS) settings and reboot;

    3. After confirming that all of the above aspects are correct, if you still can't enter the system, use the system USB flash drive or CD to reinstall the system.

  3. Anonymous users2024-02-09

    The operating system could not be found... Let's just reinstall the system.

  4. Anonymous users2024-02-08

    At present, UEFI GPT only supports 64-bit system startup installation! Win7 x64 installed under UEFI GPT cannot be activated with the commonly used soft activation, and can only be activated by flashing BIOS or genuine activation code! GPT partitions are theoretically not recommended for hard disks larger than 2T!

    Therefore, to modify Win7 on a machine with a pre-installed win8 system, you need to partition the hard disk first, and the partition type is MBR. Then go to the BIOS, select the Security menu, select Secure Boot, and turn off Secure Boot as Disabled after entering. (Otherwise, you can't boot on the U disk), then select the startup menu, change the UEFI Legacy Boot to BOTH or Legacy First (which means that you don't use UEFI mode to change to traditional CMOS mode, legacy means traditional), and then use the U disk with UEFI boot to PE, use DiskGenius to delete all partitions, and then change the master boot record to MBR under the hard disk menu, Then install win7 in the normal way.

    The book is messy. It is possible to reinstall the digital server system with a USB flash drive or hard disk, and the installation speed is very fast. But the key is to have a compatible (compatible with IDE, ACHI, RAID mode installation) and can automatically and permanently activate the verified system disk, so that the system can be reinstalled smoothly.

    3. **version tutorial: How to give you the detailed **version installation tutorial in this regard? Can't be attached. will be judged by the system as a violation.

  5. Anonymous users2024-02-07

    Then go to the computer shop and get it repaired. Or return to the factory, can it be turned on? If you can afford it, you can change it for a win7 system for dozens of dollars.

Related questions
3 answers2024-05-24

1 .All games are in full screen.

Right-click Configuration, select Search, enter scaling, find scaling in the right box, and right-click Scaling to modify. >>>More

6 answers2024-05-24

Personally, I think A8-3500M is good, after all, quad-core and dual-core are incomparable, I'm A6-3400M, it's a little card when it starts, and then it slowly gets faster, A6's main frequency is only, A8 is, although the main frequency is low, but the CPU that can be accelerated, he can reduce the frequency of the other three cores, so that a core is overclocked. Quad-cores are a little better for programming and the like, and 3D games and the like-go-go are better than triple-cores. Both A6 and A8 are APUs, and it is a new product that combines CPU and GPU. >>>More

10 answers2024-05-24

The cloud disk link has been sent to you in a private message, you can see if it is what you need. >>>More

13 answers2024-05-24

The next driver wizard, or drive the life update graphics card driver, and then install the counter-battle.

19 answers2024-05-24

I also have such a device on my computer, no matter how you install the driver, you can't install it, and I don't know what device it is. This situation only occurs after the previous system crashes and the system is redone. My solution is: >>>More