There was a malfunction when I turned it on, I hope you can help me!

There's a problem with the power management mode.,It's good to fix it.,It doesn't matter.,But the way and menu of each motherboard are different.,I can't go into detail about how to modify it.。

Do you need to press the F1 key to enter the boot?

It is mainly caused by the discrepancy between the settings in the BIOS and the real hardware data, which can be divided into the following situations:

1. In fact, there is no floppy drive or the floppy drive is broken, but there is a floppy drive in the BIOS, which leads to pressing F1 to continue.

2. I originally hung two hard disks, and set them as dual hard disks in the BIOS, but later forgot to change the BIOS settings back when I removed one of them, which will also cause this problem.

3. If the motherboard battery is out of power, it will also cause data loss, which will cause this failure. Workaround: Replace the battery.

Let's check each item one by one. Don't be in a hurry, find it slowly, there is a problem with the machine, after your elimination and finally you solve it to you can improve, good luck.

hareware monitor found an error，enter power management setup for details，press f1 to continue，del to enter setup

Chinese: The monitoring function finds an error, enter the power management setup to view the details, press the F1 key to continue the boot program, and press the del key to enter the COMS settings.

Explanation: Some motherboards have hardware monitoring functions, which can be set to monitor the temperature of the motherboard and CPU, the voltage output level monitoring of the voltage regulator, and the monitoring of the speed of each fan.

If the above monitoring function is found to have an abnormality when it is turned on, then the above paragraph will appear, then you can enter the COMS settings and select Power Management Setup, and check which part of the abnormality is issued in the **fan monitor**, thermal monitor** and **voltage monitor** on the right, and then solve it.

Friend, this is your computer that is "lost" or "mistakenly deleted" by "System Files", or "System Files" being sick.

Poison and "stubborn" Trojan "sabotage", I will give you 8 sets of plans!

The answer is original, it is strictly forbidden to steal, if there is any similarity, it is purely a copycat! ）

With: Offline mode).

Note: Friends who have installed "360 Security Guard", directly open the "Trojan Cloud Kill", click: Quick Scan Difference, after the scanning, there is: No problem, please use the 360 First Aid Kit, click on it! ）

First, click: "Start First Aid" to detect and kill the virus, and after deleting, "Restart immediately"!

After rebooting and booting, click on the "File Recovery Area", select all, and click: "Delete files completely" and "Yes".

Suspicious Launcher"! Chaos Town.

Then click "System Repair", "Select All", and then "Repair Now" file!

Click on it again: "DLL File Recovery", scan it, if not, it's OK, if there is a loss, add.

Add Recovery, add manually, restore instantly!

Click: "Network Repair", click: "Start Repair", and restart the computer!

2。Use "360 Security Guard" in "System Repair", click "Use 360 Security** Navigation", "One.

key repair"! 3。Use "360 Security Guard" to "Scan Plugins" and then "Clean Plugins" to remove it!

4。Then use "360 Antivirus Dual Engine Edition", check "Automatically process scanned virus threats", and use "Whole.

Scan" and "Custom Scan", scan out the virus Trojan, and then click Delete!

After restarting the computer, go to "Quarantine" and click "Delete completely"!

5。Use the "Trojan Horse Killing" of 360 Security Guard, scan the whole disk, and then "customize the scan" after completion!

Sweep out Trojan horses or malicious virus programs and delete them!

After restarting the computer, go to the "File Recovery Area" and click "Delete Completely"!

6。If it still doesn't work, try: "Kingsoft First Aid Kit" extended scanning and "Kingsoft Net Shield", one-click repair.

Complex! Or: KeNiu Free Antivirus, Browser Doctor, Browser Repair, Scan Now, Fix Now!

7。No more, restart the computer, after booting, press F8, press Enter, Enter, enter into "Safe Mode", "Advanced Boot Options", "Last Correct Configuration", press to try it, see the effect!

8。It's really not good, do a "one-click restore" system! (Method: I have it in my space blog).

What appears, please elaborate!

Changed the hardware, see if the CPU fan is turning, generally pressing F1 can solve the problem.

Reboot and select proper boot device or insert boot media in select boot should be due to the boot sequence being tampered with in the CMOS, which becomes a disc boot, and it cannot be automatically changed back to hard disk boot when the disc drive is not available.

Try if you can use other hotkeys to enter the BIOS, such as F2, if you can get in, you can manually modify the boot order, if you can't get in, it will be very troublesome, it is very likely that the motherboard has been invaded by a virus.

Of course, if you don't rule out the fault caused by other channels, you can try to change the optical drive.

Another: There is a problem with the boot part of your system, which means: reboot, then select the boot disk, or insert the bootable disk into the boot device of your choice.

Check whether the hard disk boot is set in CMOS, if it is, it is likely that there is a problem with the hard disk, check it after booting with the CD.

There are two main categories of BIOS: Award BIOS and AMI BIOS

1. Award BIOS settings the hard disk to boot.

After entering the BIOS, use the arrow keys to select Advance BIOS Features, then press Enter to enter the menu, use the arrow keys to select First Boot Device, click Enter to enter, use the arrow keys to select HDD-0, and then press F10 to save and exit. The boot mode was changed to hard disk boot. Everything!

2. AMI BIOS settings the hard disk to boot.

Go to BIOS, use the arrow keys to select Boot, select a Boot Device Priority, select 1st Boot Device in the submenu, and change this item to the corresponding hard disk.

The above is the introduction of the solution to reboot and select proper boot device when booting up, I hope it will help you!

If the system startup items are lost, use a CD-ROM or USB flash drive to redo the system.

Your computer system is lost or your hard drive is broken.

…>> Hello: Do the easiest first, take the host to the neighbor's house with a computer:

1. Turn on the neighbor's display (the notebook can be external) to check whether the display and display data cable are faulty;

2. By the way, you can also know whether it is a problem of virtual connection of your own meters, wires and sockets;

Now it's time to do it yourself:

3. Open the chassis and clean up the dust inside;

4. Then check whether the memory module, hard disk and other devices are plugged in firmly; Or replace the memory module with a slot;

5. Only leave the CPU (can be properly coated with silicone), graphics card, and memory module to power on and power on to confirm whether there is a problem in these three places;

6. If it can be normal at this time, it is a problem with the hard disk, please repartition and reinstall the system, or replace the hard disk;

Finally, you need to have a replacement part, or go to a repair shop:

6. Replace a high-power power supply and confirm whether it is the cause of insufficient power supply;

8. If it is not normal, there is only a problem left of the motherboard, first replace the motherboard battery, and then replace the motherboard;

If you can help solve it, please feel free;

This shouldn't be a problem of not restarting, it is estimated that there is a problem with the web page.

The optical drive does not boot when you put it in the system disk, you have to set the boot order in the BIOS.

The method of entry varies depending on the motherboard brand. The following is an example of most motherboards1Start the computer and hold down the Del key until the BIOS settings window appears (usually blue background, yellow English text) and the notebook is mostly pressed and hold F2!

It will be prompted in the lower right corner of the screen at the beginning of the boot).

2.Select and go to the second item, "BIOS Setup". Find the item or group that contains the word boot, and find the three items in order: "first", "secend", and "third", which represent "first start", "second startup", and "third startup" respectively.

Here we can set it to "optical drive", "floppy drive" and "hard disk" in order. (If you don't see these three E texts on this page, usually the option menu on the right side of boot is "setup", then press enter to see) should select "first" and hit enter, and select cd-rom in the submenu that comes out. Press enter again.

3.After selecting the startup mode, press the F10 key, the E text dialog box appears, press the "Y" key (can be omitted), and press Enter, the computer will automatically restart, proving that the changed settings have taken effect.

The first startup item of BOIS is set to CD drive start, press the del key when booting up-enter BOIS-select the second option-select the sixth option-set to CD *** CD-ROM boot-press F10 to save the settings -Y, auto-restart, enter the disc installation interface, and the rest does not need to be taught!!

Friend, if you really can't do it, let's reinstall the system.

Let's take a look at the hard disk boot mode in the BIOS to see if you have chosen the wrong one!