Mechanical watches don t wear the second hand for a year, and the others don t go for any reason

You can try to shake the watch, in the adjustment of the time should be due to the lack of kinetic energy, long-term immobility will cause inaccurate time, after the appearance of the repair shop should go to the repair shop for calibration or cleaning.

It is better to wear it for a long time, because it walks by sensing the movement of the pulse, and he will also lose. If you just bought a watch, if you don't have much time to wear it or if you don't exercise much when you wear it, you may also get straight up for a day, so keep it in a dry and clean environment.

Remember to wind it regularly.

If the mechanical watch is in a state of not going for a long time.

There are many types of mechanical watches that are prone to failure, so pay attention to distinguishing them when buying.

For manual winding, it can generally last for a while, for example, he will not stop after you sleep. Mechanical watches are a must to have movement. However, if you exercise enough the day before yesterday, if you don't take it for a day, it is equivalent to stopping the winding.

Periodically (e.g. semi-annually) last the clockwork and let it go. Yes, it will be better to wear it for a long time.

If you don't wear it, you need to do a good job of dustproof and moisture-proof treatment! The most feared thing about mechanical watches is water ingress, and automatic mechanical watches are best not to be left for a long time. Yes.

For an automatic watch to keep walking, it must be allowed to move. Even if it moves slightly, it can continue to walk without stopping.

Because when it is moving, these watches are generally worn against the inside of the wrist and do not need to be wound.

For the kinetic energy type, but if you don't wear it for too long, such as ten days and half a month, so, when it is still for a long time, so that he can have enough energy, so that the time of the watch will not stop and go. Note: Mechanical watches must be brought every day. If you take it off, you won't be able to leave, but if it's a self-winding watch.

There is a rotating watch stand that is most suitable.

The shelf automatically rotates to wind the watch.

Ordinary mechanical watches will automatically wind, just like a car engine, which means that as long as you wear it on your hand and walk a few times, he can generate power, and you must wind it regularly, otherwise the spring will stop running after it is loosened.

For the photokinetic type, it is enough to see the light, so mechanical watches are not suitable for office workers and the elderly, which is considered normal.

This is generally due to the failure of the dial needle system, if the tools are complete and there is a certain amount of watch repair technology. The dial pin is tied to the bottom of the dial, and the screws of the relevant parts of the suspension are loosened to lift the lower watch hand, and you can see the dial pin system when you take off the dial of a general mechanical watch, and take off the time wheel to carefully observe whether there is anything that is not touched. This troubleshooting method first checks the dial pin system and then checks the drive train.

If the second hand is moving, it means that the movement will move, and if the hour and minute hands do not move, it may be that the wheel and hand that hold the hand are slipping.

Summary. The solution to the second hand of the mechanical watch does not go is as follows.

The solution to the second hand of the mechanical watch does not go is as follows.

1. Whether it is because the second hand is loose. Gently swing the watch from side to side, if the second hand swings with the second hand to loosen, you can go to the after-sales service to tighten the second hand. 2. Whether it is because the watch movement is damaged or parts fall off.

If this is the case, send the watch to a professional after-sales service for repair. 3. Whether it is because of insufficient power. Charge the watch, see if the second hand can move, if it can move, it means that the power is insufficient, if not, send it to the after-sales service.

4. When the power is insufficient, it is easy to cause a delay in time, thereby delaying time. If it is a problem with the movement, it is very likely that other parts of the movement will be damaged or the gears will be stuck if the parts are not taken out in time. If there is a problem with the watch, just deal with it in time.

Dear Kiss I am happy to answer this question for you, the second hand of the watch does not go, you can do it according to the following methods: 1. Whether it is because the second hand is loose. Gently swing the watch from side to side, if the second hand swings with the second hand to loosen, you can go to the after-sales collapse to tighten the second hand. 2. Whether it is because the watch movement is damaged or parts fall off.

If this is the case, send the watch to a professional after-sales service for repair. 3. Whether it is because of insufficient power. Charge the watch to see if the second hand is active, if it is not cracked, it means that the power is insufficient, if not, send it to the after-sales service.

4. When the power is insufficient, it is easy to cause a delay in time, thereby delaying time. If it is a problem with the movement, it is very likely that other parts of the movement are damaged or the gears are stuck because the parts are not removed. If there is a problem with the watch, just deal with it in time.

There may be many reasons why the second hand of a mechanical watch does not go away, which can be judged and solved from the links that may cause problems: 1Historical Adjustments:

The second hand of the mechanical watch does not go is likely to be adjusted before, and its principle is to shift the positioning index to be run in the next step of the process by one bit, and then it is necessary to manually reverse the last positioning index to adjust the suspension state; 2.Stop ring: It may be that the watch stop ring is stuck, it is a ring that controls the tension of the string of the balance wheel, if this ring is stuck, it will affect the beat and speed of the watch; 3.

Balance wheel: It may also be that the balance wheel of the dial is broken, the balance wheel is the key to the operation of the balance wheel of the mechanical watch, if the balance wheel is broken during the movement, it will affect the beat of the mechanical watch. 4.

Rope: The second hand of the mechanical watch may not go due to the leakage of the rope, so you need to open the watch mask to check and observe whether the manual strip inside is missing. If you find that there is a problem in these four links, you can contact a professional watch repair master for repair.

In addition, it is also necessary to pay attention to proper storage and maintenance, such as refueling the watch regularly, dismantling the wheels every six months, cleaning the internal parts, and wiping the daily activities on the surface of the watch regularly, etc., according to different models of mechanical watches to maintain correctly.

Summary. What happens when the second hand of the watch does not go The second hand of the watch does not go for the following reasons:1

The watch is magnetized. Due to too much contact with items with magnetic fields, the watch is magnetized and the watch needles are inaccurate, and it needs to be taken to the watch repair place for demagnetization. 2.

Lack of maintenance. If the watch is not maintained for a long time, it may cause some parts to deteriorate and rust, resulting in problems such as inaccurate time and need to be maintained in time. 3.

Mechanical failure. There may be a malfunction inside the watch due to other external factors.

What is going on with the watch second source collapse needle does not hail letter circle go The watch second hand does not go There may be the following reasons:1The watch is magnetized.

Due to too much contact with items with magnetic fields, the watch is magnetized and the watch needles are inaccurate, and it needs to be taken to the watch repair place for demagnetization. 2.Lack of maintenance.

If the watch is not maintained for a long time, it may cause some parts to deteriorate and rust, resulting in problems such as inaccurate time and need to be maintained in time. 3.Mechanical failure.

It is possible that the internal malfunction of the watch is due to other external factors.

I'm sorry I don't understand, but can you elaborate on that?

If you buy a mechanical watch, it should be that your watch is messy and the crown is not pressed back. The second hand of a mechanical watch is generally always moving when the mainspring is attached, and the minutes and clock hands will not move if you do not press the crown.