CrossFire W7 system flag version of how to adjust the smoke head is the clearest. Ask for an answer

Karma method XP system: Desktop - right-click - select "Properties" - select "Settings" - 800*600 pixels - select "Color Quality" - select 16 median colors - Advanced - select "Monitor" - adjust "Hz" to 75. Turn down the picture quality!

Enter the game, press F1, adjust the brightness to 75, OK. In this way, the white smoke is basically ineffective, and the red and green smoke are half-visible Win7 system: Step 1, right-click on the desktop, screen resolution - advanced settings - monitor - color 16 bits.

Step 2、Right-click on the desktop Control PanelNVIDIA Control Panel - Adjust **Color Settings--Brightness to 78%-Contrast 55%-Hue 11—— Saturation 35, Click to apply to the game brightness above 65 Thank you for the reward!

Tune in outside before you get into the game! First right-click on the surface (Properties), then click on (Settings), click on (Advanced), then click (GeForce GTS 250), then click (launch NVIDIA Control Panel), then click (Adjust below**Color Settings), click on (via NVIDIA Settings), then Two-Tone (55 percent), Contrast Tone (85 percent), Hue (55 percent), click (Apply), turn it off, click OK, After clicking Yes, then adjust the color quality to (16-bit) and click OK.

The next CF elf has a smoke head in it.

How to adjust the cf smoke head:

1.Click on the computer desktop to start, find the nvidia control panel after the control panel, and adjust the **color** at the end of the point, 2Then click through the nvidia setting,Then start to adjust,Brightness is adjusted to 78%, Contrast 55% Hue 11 Saturation 35,Click to apply after finishing,Exit after application,3 Come to the desktop,Right click, Properties, Settings, Color quality changed to 16,Apply OK after finishing,OK,4Enter the game into the game and point to set, 16k,Change to 32kEnter the game and throw a cigarette to try。

cfwin7 smoke head tuning:

1.First open the CF game client terminal, and when you enter the selection platform, don't move the desktop properties (move the mouse to the desktop and right-click).

2.There is a "screen resolution" in the settings, and the screen resolution is set to 800 600;I adjust the color quality to 16 bits

3.Click Application (if a dialog box pops up, just click OK) Click Advanced Advanced and click "Monitor" to set the "Hertz" in the monitor to the highest (usually 75 Hz).

4.Click OK (if the dialog box pops up after confirmation, click OK directly) Enter the game in the game, click Settings There is a "Texture Quality" in the settings, and this is checked as "Low".

5.After that, adjust the brightness of the picture to 65 (this is the best effect, you can also turn it up appropriately).

I'm also win7 ultimate version,I've found a good way to tune it now,1,Right button on the desktop,Resolution,Pay attention to a point on the right for an advanced setting,Click,Find the second one above is the monitor,Click,Replace the true color (32) with enhanced color (16) Close after OK。 2, right-click on the desktop, it is win7 and there will be an nvidia control panel, this is very special, because he has a small icon, click in, find it in the options on the left (adjust** color settings), click once, find the second one in the right box (how do you make color adjustments?) ),There are two options here,Choose the second one (through nvidia settings),Then the following options are on,It's all in the middle,This is the most important,Brightness +75%,Contrast +55%,Hue -12,Saturation -35%,So you can apply and exit,Then enter the game,800*600 resolution,16bit color,Low texture quality,Brightness 75+ is OK,So that the smoke in the game can see people in white,Red smoke can be seen clearly in the smoke, But I have to see a little shadow outside.,There's no way.,Pure hand fighting.,As long as you want to play cf.,As long as you want to see the smoke clearly.,Don't be afraid of trouble.,And win7I'm not afraid of the smoke head effect disappearing after cutting the screen.,Thank you.

First click the right mouse button, then click Properties, then click Settings, change the screen resolution to, change the acceptance quality to Medium, then click Advanced, find, it is the control panel, click on it, find Change Resolution, also adjust the resolution to, color depth bit, refresh rate, and then click to adjust the desktop color settings, adjust the brightness to, digital vibration control to, contrast, grayscale. Then click Save app and you're good to go, at least that's how I did. If you don't feel very good after entering the game, just adjust the brightness and grayscale appropriately, and you feel that you can do it, after all, the configuration of the computer is not necessarily the same.

The colors can be found on NVIDIA panels! No nvidia panel can first ** a driver life and then install the driver! Then adjust the color! You have to adjust the color of the smoke head, unless yours is an XP system! Pure hand fighting! Give points!

Method steps.

Display: Right-click on the desktop and click "Screen Resolution", then click "Advanced Settings" in the window, how to select "Monitor", change the color to "Enhanced Color (16-bit)", then right-click on the desktop and click "NVIDIA Control Panel", then click "Adjust**Color Settings" on the left side of the page, then adjust the brightness to 78%, contrast 55%, hue 11, and saturation 35 in the middle of the page, and then click Apply to complete the CF smoke head setting.

Right-click on the desktop and click Properties. Click Settings. In the settings, set the color quality to 16 bits. Click on the monitor inside Advanced and hang it to 75hz. Once you're in the game, switch out the game to your desktop and set the screen resolution to 800 600

You constantly want to harvest sweet love, and even after experiencing the betrayal of friendship, the admonition of family affection, the disparity in family backs, and the test of regional distance, you still insist as always, and you devote yourself wholeheartedly, because you believe that after the storm is a rainbow. But in the end, the reality still tells you: in the face of interests, everything is back to the starting point, which includes friendship, but also love.

You keep believing in the beauty of love, but in the end it is often love itself that hurts you.

Method 1 of adjusting the smoke helmet.

1.First, right-click on the properties and then set the screen resolution to 800 by 600

2.Then click Advanced, turn on the monitor, and change the screen refresh rate to 75 Hz.

3.Then open the option above the monitor.

4.Then click to launch the NVDIA control panel, this step is a little stuck, wait a minute.

5.After turning it on, choose to change the resolution, refresh rate 75hz, color depth 16 bits.

6.Then select Adjust the noodle color setting, set the digital vibration control to between 80 and 100, and click Save.

7.Finally, enter the game,Then adjust the screen resolution in the game to 800 by 600,16-bit color is OK,The effect is absolutely good,White smoke is basically ignored。

How to adjust the cf smoke head is the best method two.

In fact, bring the smoke head and make some display settings in the red and green smoke, which can fade the smoke. It's like wearing a smoke head in white smoke, and you don't need assistance, you can dilute or even ignore the smoke effect by adjusting the display settings. Prefer desktop right-click-properties-settings (resolution 800*600 in 16 bits), and then go to the game to adjust the image quality to low, and the texture quality is low.

Switch out of the game again, then right-click on the desktop - Properties - Settings - Advanced - Monitor (75 Hz) - GeForce 7300 LE - Launch - Find Adjust Desktop Color Settings - Find the Digital Vibration Control - Turn to Max - Switch back to the game, brightness up to 70 to 100, it depends on the individual situation.

In the absence of a smoke head, the white smoke is translucent, and the red and green smoke fades (like looking at white smoke without a smoke head).

In the case of smoke heads, the white smoke is directly ignored, and the red and green smoke is translucent.

Step 1: Right-click on the desktop to divide the screen into field resolution - advanced settings - monitor - color 16-bit.

Shade 11 ——

Saturation 35, point after application.

The brightness of the repentance scene in the tour file is 65 or above.