2011 ATX Cadillac how to pair car bluetooth

Turn on the car's Bluetooth to prepare for the paired device search, the mobile phone immediately searches for the paired device, so that you can find the on-board device, and then enter the connection password, it should be 0000 or 1234, and then confirm, it should be OK.

Specific steps: 1. Open: Turn on the Bluetooth of the mobile phone and the Bluetooth of the car (the Bluetooth of the car is generally in the communication or connection), and it is in a discoverable state.

3. Pairing: Select the car Bluetooth displayed in the mobile phone, and click the car Bluetooth - Bluetooth settings - pairing; At this time, the phone will pop up a dialog box asking for the pairing code, enter the pairing code here (the default is 1234 or 0000 or 1111) and click "Connect" (or "Pairing" or "OK", different mobile phones display different), and click "Pairing" in the car Bluetooth interface.

4. Connection: If the pairing code is entered correctly, you can display "connected" on the car Bluetooth later, at this time you use the car Bluetooth to connect the mobile phone **** to see, if the car rings your mobile phone's ** pairing successfully.

5. Automatic connection: After that, if the mobile phone and the car Bluetooth are turned on, and the range is within 10 meters, it will be automatically connected. ‍

1.Examine. ATX Cadillac.

Whether the car's trip computer supports Bluetooth connection. (It must be above Bluetooth, otherwise the mobile phone will fail to pair, and the iOS mobile phone requires that the Bluetooth of the driving computer must be, otherwise the iOS device cannot be paired with the Bluetooth of the driving computer).

2.After the trip computer supports Bluetooth connection, turn on the Bluetooth on the mobile phone and the Bluetooth on the trip computer to pair, after the pairing is completed, the trip computer will use the Bluetooth source as the first sound source. (That is, you can hear a series of sounds from the mobile phone, such as songs, **, text messages, etc.) The on-board computer generally has a Bluetooth pairing function in the setting interface, and some models have a one-key pairing function.

Bluetooth can be enabled through the following methods.

1. First click the one-button start button of the vehicle to power on the vehicle, otherwise Bluetooth cannot be used.

2. After that, you can find the central LCD screen control switch in the position shown in the figure.

3. After that, click the switch button below the central control display to turn on the central control display.

4. After that, click the ** menu on the central control and turn on Bluetooth.

5. After that, click the icon button on the right side of the vehicle's multi-function steering wheel to connect to Bluetooth**.

6. After that, you can make a call through Bluetooth on the central control screen.

Here's how to enable Bluetooth for the 11 Cadillac SRX:

1.Press the ** shape button located on the steering wheel. If you are equipped with a navigation system, please say "hands free" after the system confirmation sound.

2.Say "Bluetooth".

3.Say "pair". The system explains and responds with a four-digit PIN number.

4.Enable the device pairing process that you asked to pair.

5.Use the PIN number provided in Step 3 to connect.

6.Repeat steps 1 to 5 to pair additional devices.

Mobile phones and in-car Bluetooth devices should be paired.

Tool Material: Cadillac SRX car, Apple 6S phone.

1. First, click the "AUX" button on the Cadillac SRX car.

2. Secondly, in the interface, display the "Bluetooth" information.

3. Then turn on your Apple 6S phone and tap on the "Settings" option.

4. After that, in that interface, click on the "Bluetooth" option.

5. Then in the interface, turn on the "Bluetooth" switch.

6. After that, in the interface, click on "Cadillac SRX Bluetooth Name".

7. Then in that interface, tap on the "Bluetooth Pairing Request" option.

The 2011 Cadillac SRX uses Bluetooth to connect to the car's stereo as follows:

1.Press the Bluetooth screen button, then select Match new device to add a new device.

2.Turn on your device and pair it to connect.

3.Once pairing is successful, you can access the audio app from the home page or through the app tray.

4.Select the "**" screen button until the Bluetooth audio menu is displayed, and the phone's Bluetooth will be connected to the car stereo.

Cadillac's in-car Bluetooth is turned on and paired as follows (take the 2018 XT5 as an example).

Controls on the center console and steering wheel can be used to operate the Bluetooth system.

Pairing: 1Before you start pairing, make sure you have enabled Bluetooth on your phone.

Tap the "**" app icon on the home page to enter the "**" home page, if no mobile device is connected, the "**" home page will show the "Connect" option. Tap on the "Connect" option.

2.Then click the "Add**" button.

3.Select the name of the vehicle that appears on the infotainment display from your phone's Bluetooth settings list. Then follow the on-screen prompts to pair.

4.Once the connection is successful, your phone's name will appear in the list of connected ones. You can choose to delete, connect, and disconnect phones and mobile devices from the list.

5.Click the y() icon to the right of the name of the connected device to enter the settings interface to disconnect or delete the connected device, and at the same time you can set options such as "Preferred Connection" and "Auxiliary**".

The steps are as follows:

1. First of all, click the "Settings" icon on the main interface of cue.

2. Click the "Bluetooth" menu.

3. Click the "Match New Device" menu, and the following interface will appear:

5. Confirm the pairing on the cue and mobile phone interfaces respectively, and the following interface will appear after success, click to confirm.

Tap "Device Management" in the Bluetooth menu to view the phones or other devices that have been matched.

6. Click the red "X" symbol, and then click "Disconnect" to unpair the group's Bluetooth pairing.

When a mobile phone completes the matching with the CUE, it will automatically complete the connection as soon as it enters the cockpit next time, and there is no need to match it again. (Bluetooth on the phone needs to be turned on).

Some early versions of Android phones need to be set to Bluetooth "visible" or "discoverable" when matching (different versions will have different expressions), please refer to the mobile phone manual for specific operation methods.

How to turn on the car Bluetooth of Cadillac, you should first open the network and use the network docking.

Turn on the Bluetooth of the mobile phone and the Bluetooth of the car, and after matching, you can directly turn on the Bluetooth function when you use it to automatically connect.

Hello, which model of your car is this, it is generally possible to turn on Bluetooth through the large central control screen.

Hello, this depends on which model of Cadillac, and the handling methods of different models are different. Some Bluetooth function steering wheels can be turned on.

The first step is to turn on the Bluetooth of the mobile phone and the Bluetooth of the car, and be in a discoverable state;

The third step is to select the car Bluetooth displayed in the phone, and tap the car Bluetooth - Bluetooth settings - pairing. At this time, the phone will pop up a dialog box asking for the pairing code, enter the pairing code (usually 1234 or 0000 or 1111) and click "Connect", and click "Pairing" on the car Bluetooth interface, that is, the pairing is successful.

When you use it in the future, as long as you turn on the Bluetooth of the mobile phone, it will be connected to the vehicle by default.

1. First of all, turn on the mobile phone and the car Bluetooth, search for the car Bluetooth bydaout (basically this name), and then connect. Also set it to connect automatically so that you can connect automatically when you get in the car.

2. Set up and turn on your phone on Multi**, and then go back.

Basic introduction: 1. The Bluetooth technology in the vehicle Bluetooth system is a continuation of the Bluetooth technology of the mobile phone and has the same transmission system.

The function of the car Bluetooth is to automatically identify the mobile **, and it can be connected to the mobile phone without cables or brackets; The owner can control the mobile phone without touching the mobile phone, or even keep his hands on the steering wheel, and use voice commands to control the answer or dial**. Users can make calls through the car's stereo.

2. Car Bluetooth through the FM frequency and the whole car audio matching, when in use, the Bluetooth function of the mobile phone and the car audio together, convenient for the owner in the call, can automatically switch the sound of the audio, mute, and reduce the power consumption of the car Bluetooth, hang up the sound will be automatically restored.

3. After installing the on-board Bluetooth system, the owner does not need to be distracted when driving to answer the **. When answering an incoming call, users can answer it with a simple press of a button or voice control**, which improves the safety and convenience of driving.

The answer is glad to answer for you: 1. Turn on the Bluetooth of the mobile phone and the Bluetooth of the car, and they are in a discoverable state; 2. On the Bluetooth interface of your phone, click "Search for Devices". The mobile phone can search for the car Bluetooth; 3. Select the car Bluetooth displayed in the mobile phone, and click the car Bluetooth - Bluetooth settings - pairing; At this time, the phone will pop up a dialog box asking for the pairing code, here enter the pairing code (the default is 1234 or 0000 or 1111) and click "Connect", and at the same time click "Pairing" in the car Bluetooth interface; 4. If the pairing code is entered correctly, you can display "connected" on the car Bluetooth later, at this time you use the car Bluetooth to try it, if it is successful, you can hear the call tone; 5. Select the "automatic connection" function in the car Bluetooth setting interface, and then if the mobile phone and the car Bluetooth are turned on, and the range is within 10 meters, it will be automatically connected.

Car Bluetooth must first choose to search for the device (device pairing), in this case, use the mobile phone to search for the device, the mobile phone is easier to search for the car Bluetooth, after searching for the name, the mobile phone point connection, prompt password: enter 1234 or 0000 (generally car *** navigation) car Bluetooth will display the name of the mobile phone.

Car Bluetooth is a device that needs to be connected with a mobile phone Bluetooth (the main device). First of all, it is necessary to enter the interface of the car Bluetooth, and some car machines have a power switch for the car Bluetooth. It needs to be turned on in the Bluetooth settings, and then paired at the Bluetooth interface to make the Bluetooth enter the pairing mode, but some manufacturers will enter the pairing mode as soon as they are powered on.

Then turn on the Bluetooth device of the mobile phone, search for a new Bluetooth device, find the car Bluetooth device and connect the device, at this time you need to enter the pairing password, generally four zeros, depending on the manufacturer's settings, there are generally settings to modify the pairing password. After successful pairing, connect the device.

Connection method: First, you need to click on the mobile phone to open the [Settings] icon to enter the settings page - then, find the [Bluetooth] option - then, turn on the Bluetooth - Then, after turning on the Bluetooth function, you also need to open the second [Open Detection], so that you can establish a connection with the car Bluetooth later.

1. First of all, click the [Settings] icon on your phone to enter the settings page, as shown in the figure below.

2. Then, on the settings page, find the Bluetooth option and click to enter the Bluetooth management of the phone, as shown in the figure below.

3. Next, after entering the Bluetooth management page, turn on the switch on the right side of Bluetooth to turn on the Bluetooth function of the phone, as shown in the figure below.

4. Then, after the Bluetooth function is turned on, you need to turn on the second [Open Detection], so that you can establish a connection with the Bluetooth of the vehicle behind, as shown in the figure below.

5. Next, turn on the vehicle's Bluetooth, wait for the phone to scan the nearby vehicle's Bluetooth device, and then tap to connect the corresponding vehicle's Bluetooth device, as shown in the figure below.

Notes:

1. Do not use the car Bluetooth in strong light for too long.

2. Do not use corrosive liquid to clean the car Bluetooth.

3. Do not store the car Bluetooth in an overheated place, the high temperature will shorten the life of the electronic device, damage the battery and make some plastics age.

First of all, it is necessary to enter the interface of the car Bluetooth, some car machines have a power switch for the Bluetooth of the car machine, which needs to be turned on in the Bluetooth settings, and then paired at the Bluetooth interface point to make the Bluetooth enter the pairing mode;

After opening the Bluetooth device of the mobile phone, search for a new Bluetooth device, find the car Bluetooth device and connect the device, this time you need to enter the pairing password, generally four zeros, depending on the manufacturer's settings, there are generally settings to modify the pairing password. After successful pairing, connect the device.

Turn on the on-board Bluetooth device, enter the settings page, there is generally a connection, or a pairing button, select the option, and then turn on the phone, turn on the Bluetooth function, which is generally in the settings of the phone. In the next step, the mobile phone has an option to add a device, or there is an option to search for a new device, click OK, and a new device should be found after a while, there will be a car logo in the general name, selected, connected, will prompt the connection password, the car will generally be 0000 or 1234, you can refer to the car Bluetooth manual. After the connection is completed, some mobile phones still need to authorize the device to connect before they can be used.

Once you're done, you're ready to answer and dial** from your on-board device.

If you connect to the car Bluetooth, you just put the Bluetooth in the car and then operate the socket.