How much is the price of vitrified microbead insulation mortar?

The price of vitrified microbead insulation mortar is similar to that of rubber powder polystyrene particles, and it will be a little more expensive The cost of hanging board is relatively high, and the thermal insulation, sound insulation, and fire prevention effect of polyurethane are very good, and it is also the most expensive one.

There is a big gap between the localities. The ** of vitrified microbeads is about 1300 yuan tons in Xinyang, Henan. Due to the small bulk density, the freight is large, which affects the quality of the insulation mortar. Its ** range is 00-900 yuan per cubic meter.

You can't buy it by ton, there is a ton of square, 2 square is also square, the best at present is our one ton of square, the content of vitrified microbeads is high, and the heat preservation is good. The ratio of vitrified micro reaches 4:6

The more the number of cubes, the better, and then it is to see if it is made of real vitrified beads, if you use fake vitrified beads to make a mixture of water, the construction area will be seriously shrunk, which is more greasy, you must use it yourself when you buy to know, when you buy to remember to ask how much is a party, not how much is a ton.

Shanghai here is more than 60 yuan a square, polyurethane extruded plastic board and polystyrene board are not large, between 60-70 contracted labor and materials...

**On the one hand, it is mainly based on the practice of the site to change to achieve good results, some sites, bonding mortar sent to the construction site, and some add a few bags of cement. The main thing is to grasp the customer's information first.

I also listened to one of my customers, I do HPMC, mainly responsible for the Shanghai market!

Are you in Beijing? The mortar here is generally about 600, of course, it can't be compared, the key is to look at the price, there are cheap, but he uses not glass beads but perlite. So** inexpensive.

Specifically, you can consult Beijing Juneng Xingye, his family produces their own glass beads, and uses their own glass beads to produce mortar, with the highest quality.

About 560, you can ask Juneng Xingye, his own production, the base is in Zhuozhou, the product quality is cost-effective.

1.designed.

Thermal conductivity. In the following 1000 yuan cubic meter, 3800 yuan ton.

2.The designed thermal conductivity is 1700 yuan tons.

3.The designed thermal conductivity is 1200 yuan.

This depends on the design needs.

I'm doing this: 13129491090

Vitrified microbeads have a bulk density of 300kg per cubic meter; 1 ton = 1000kg; 1000kg divided by 300kg = cubic meters.

Vitrified microbead insulation mortar is a new type of inorganic thermal insulation mortar material applied to the internal and external insulation of external walls, which is made of vitrified microbeads as light aggregate and vitrified microbead thermal insulation rubber powder according to a certain proportion and stirred and evenly mixed, which has the remarkable characteristics of high strength, light weight, heat preservation, good heat insulation, good electrical insulation performance, wear resistance, corrosion resistance, radiation protection and so on.

Key points of vitrified microbead insulation mortar construction:

Due to the chaotic vitrified bead market, its quality is uneven, resulting in most of the vitrified bead insulation mortar water absorption rate, easy hollowing and other shortcomings, in order to ensure the quality of its vitrified bead insulation layer, we must pay attention to the following points in the construction. Key points to note in the construction of vitrified microbead insulation mortar:

1. The construction temperature of vitrified microbead insulation mortar should not be less than 5;

2. Clean the base layer of the wall that needs to be insulated to prevent the vitrified microbead insulation mortar from hollowing;

3. Add an appropriate amount of water to the vitrified microbead insulation mortar and stir it evenly, pay attention to the high water absorption rate of the vitrified microbead insulation mortar, and be sure to pay attention to the amount of water added when stirring;

4. According to the insulation thickness required by the design, the stirred insulation mortar shall be distributed, and there shall not be less than one per square meter;

5. Apply the insulation layer in 2-3 times. The first time it is required to try to compact the vitrified microbead insulation mortar (otherwise the vitrified microbead insulation mortar is easy to cause hollowing and cracking, this step is very important), so that it is firmly bonded with the wall, and try to make it thicker. After 3-4 hours of natural curing, apply 2-3 times, and level and calender;

Hello answer, I have seen your question and am sorting out the answer, please wait for a while Hello Vitrified microbeads per cubic meter bulk weight 300kg 1 ton = 1000kg 1000kg divided by 300kg = cubic meter.

Have a great day.

Question: Is there a cubic meter in a ton?

How much does it cost a ton?

I'll take a look. Hello, my market price is 1000-2000

But there are local differences.

It may be different, and there will be errors.

Question: More than 1900 tons of *** on our side.

I started with this 1000.

The quality is both good and bad.

Vitrified microbeads have a bulk density of 300kg per cubic meter;

1 ton = 1000kg;

1000kg divided by 300kg = cubic meters.

Mass divided by density equals volume.

Vitrified microbeads have a bulk density of 300kg per cubic meter;

Vitrified microbead insulation mortar is a new type of inorganic thermal insulation mortar material applied to the internal and external insulation of external walls, which is made of vitrified microbeads as light aggregate and vitrified microbead thermal insulation rubber powder according to a certain proportion and stirred and evenly mixed, which has the remarkable characteristics of high strength, light weight, heat preservation, good heat insulation, good electrical insulation performance, wear resistance, corrosion resistance, radiation protection and so on.

According to the requirements of the national standard, the capacity is less than 280kg square, in fact, the products from general manufacturers can be within 330--- that is, 1 ton has 3 squares, which is very good!

The national standard requires the saying of type and type. If it is a type, it usually has a bulk weight of 250-300kg square, and if it is a type, it is 300-400kg square. Specifically, you can consult the professional manufacturer Beijing Juneng Xingye.

In winter, due to the large temperature difference between indoor and outdoor, the wall is often frozen, or the indoor thermal insulation effect is not ideal, usually a layer of insulation board is pasted outside the wall, or the expansion vitrified microbead insulation mortar is directly used, so as to achieve the effect of thermal insulation. Expanded vitrified microbead insulation mortar is a new type of mortar material that is mixed with expanded vitrified microbeads and thermal insulation adhesive in a certain proportion and is used to make the building achieve thermal insulation effect inside and outside the wall. Let's give you a detailed introduction to the expanded vitrified microbead insulation mortar.

1. Manufacturer of expanded vitrified microbead insulation mortar

1. Langfang Huaneng Chemical ****.

Main products: glass wool products, aluminum silicate products, mineral wool products, etc.

Company Profile: Langfang Huaneng Chemical Co., Ltd. is located in Dacheng County, Hebei Province, is a major processing and production of various building materials company, the company is large-scale, Na Xuan belongs to the leading enterprises in the industry, has been established for 20 years, and a number of dealers to maintain a long-term and stable cooperative relationship, in the quality of product at all levels, won the industry and outside the praise.

2. Tianjin Dongshengguang Building Materials.

Main Products: Tile Adhesive, Polymer Anti-Crack Mortar, etc.

Company Profile: Tianjin Dongshengguang Building Materials **** is located in Xiqing District, Tianjin, is a company mainly engaged in the production and processing of various building materials. The company has introduced advanced production and processing technology from abroad, has first-class professional production equipment in China, and actively recruits talents from major and efficient sources, so that the company has a strong support backing.

3. Dacheng County Hongke Thermal Insulation Material Factory.

Main products: adhesive mortar, anti-crack mortar, thermal insulation mortar, etc.

Company Profile: Dacheng County Hongke Thermal Insulation Material Factory is located in Dacheng County, Hebei Province, is a major business in the production and processing of various building materials and mortar, the company has a domestic first-class professional assembly line, complete pipe cavity and limb management mode, excellent technical personnel, products to meet the different needs of customers around the country, more exported to overseas, for our company has gained a lot of praise inside and outside the industry.

Second, the expansion of vitrified microbeads insulation mortar

The above is for you to sort out all kinds of relevant information about the expansion vitrified bead insulation mortar manufacturers and the best information, I believe that we have a new understanding and understanding of this mortar building materials. The construction of expanded vitrified microbead insulation mortar is very convenient, can be directly applied to the wall, and anti-corrosion and anti-aging, non-toxic and tasteless, environmentally friendly, especially in line with the environmental awareness and purpose of the modern energy-saving society, if you want to know more relevant information, just continue to **** Tuba Rabbit!

You can get it for free

Summary. Hello, I have seen your question and am sorting out the answer, please wait a while How many cubic meters is a ton of vitrified microbead insulation mortar

Hello, I have seen your question and am sorting out the answer, please wait for a while Vitrified microbeads per cubic meter bulk weight 300kg 1 ton = 1000kg 1000kg divided by 300kg = cubic meter.

Summary. Find how many cubic meters of vitrified microbead insulation mortar is equal to one ton