I can t enter the system, I can t reinstall the system, it s all stuck on the reading progress, what

Maybe the hard disk partition is wrong, you find an installation disk, use the hard disk partition tool, and format the main partition. Then reconstruct the MBR.

1.If you install it with ghost, is the original driver still there?

After reinstalling the system, the previous drivers are gone, and they need to be reinstalled.

2.Can the software on other disks still work normally?

After reinstalling the system, some of the files and registry files that some programs on your computer loaded into the system are gone, so the programs cannot be used normally and need to be reinstalled.

3.If you format all other disks and reinstall the system with ghost, will the effect be the same as reinstalling with a disc, and is the reinstallation complete?

If you want to completely reinstall and don't want other drive letter data, you can choose to reformat the partition, reinstallation is not so complicated, directly format the C disk, and then install the system, the specific effect is similar to the disc installation, but it is a little more complicated.

Please refer to it.

Any tips? Can it enter the PE system? Enter the PE system to format the disk, and then reinstall the system to see if it works.

A few days ago, I helped a friend look at a machine, and it was the same as the landlord's situation. Confirm that it is a bad sector of the hard disk. I can see that I can take it and repair it.

You're using the pirated kind of ghost installation method.,You can set the hard disk interface of the motherboard BIOS and turn off the ATA.。

Computer reinstall the system.

I have been stuck there and have the following reasons and solutions.

Argument: The system image file is incomplete or corrupted.

2: There are bad sectors in the installation disk.

1) Regardless of whether you use a USB flash drive.

Optical discs, or hard disks for installation, may have bad sectors, resulting in the installation being stuck.

2) Solution, if you use a U disk, CD installation, change to a system CD or U disk; If you use a hard disk to install, check whether there are bad sectors under PE, search for any bad sectors, repair or partition isolation, or replace a hard disk.

The driver is not recognized or the mounting plate needs to be replaced.

The last English prompt "disk boot failure,insert system disk and press enter" means: The disk boot failed, insert the system disk and press the key to enter The reasons are as follows:

1. The hard disk is damaged or loose.

2. The data cable is damaged or loose.

3. There is a U disk inserted in your computer, or a disc in the optical drive, or a floppy disk in the floppy drive, etc. Then check whether the hard drive is loose and whether the hard drive data cable is loose.

If there is no problem with the above, then replace a new data cable and try If it still doesn't work, it may be that the hard disk is damaged, please repair or replace the new hard disk (if you can't get it yourself, you can repair it).

In addition, there is another situation, the memory is re-plugged and unplugged, and the dust can also be solved (sometimes it is caused by it, the above answer is literal, and you have to check it yourself according to the performance of your computer before the accident, and if you can't find the reason, you can repair it).

Is there a USB flash drive boot disk? If you have one, please click on my avatar to consult.