Methanol car, do you install a controller?

A low proportion of methanol gasoline does not need to be installed, but the proportion of methanol is greater than 30% and a controller needs to be installed. Give a good review.

Methanol gasoline for vehicles, depending on the proportion of methanol gasoline you configure, generally a small proportion of methanol gasoline does not need to install a controller, and a large proportion needs to be installed.

For EFI vehicles, it is necessary to install a controller to widen the pulse width of the original vehicle injection in real time to adapt to the problems of low calorific value of methanol and small air-to-mix ratio.

However, there are many related technical problems that need to be treated carefully.

Carburetor cars can also be converted to methanol. And it is relatively stable and reliable compared to the EFI truck. The only problem is that it is not convenient to switch to gasoline after changing. If you burn gasoline directly, the fuel consumption will be very amazing.

After a large number of experiments have proved that the amount of methanol required by methanol cars at different speeds is not the same, with the FDTD series 10-gear cab adjustable methanol controller as the experimental object, when the car is in the idle and initial stage, the following fuel supply can not be achieved at all, and when the car is driven at high speed, the amount of methanol ** in the cab can be adjusted to or gear can be driven at high speed, and if the use or gear fixed driving 100 kilometers need 12 liters of methanol, and the use of gear shifting, 100 kilometers measured only 9 liters, fuel consumption decreased by more than 30%, based on this, on the basis of ensuring stability, Panduit Tiandi company has developed, the most advanced inverter methanol car controller, in the cab can be real-time car fuel supply ratio and speed, fuel supply ratio will change according to the speed change, the measured fuel efficiency than the current most advanced methanol controller up to 30%. Compared with gasoline, it can save 60%, the combustion cost is comparable to that of natural gas, and the power is completely higher than that of natural gas.

Of course, it is recommended that you use Dandong Huizhong or Wuhan Zhong's alcoholized auxiliary tank dual-fuel system.

What is a dual-fuel system? It is possible to burn both gasoline and methanol, at the same time, and a set of auxiliary fuel tanks should be added.

The dual-fuel system is the best solution, and the other options are advised not to be considered, there are many problems.

The methanol controller is installed on the car, and the methanol controller is convenient and concise when installed, without changing the car circuit, architecture, etc.! This is the kind of controller installed on the general methanol car.

I am a manufacturer of methanol gasoline additives in Qingdao, and a high proportion of methanol gasoline needs to add a controller to adjust the pulse width of the fuel injection, and a low proportion can not be used, but now the controller is installed to burn more M100 M85 methanol gasoline.

Only by installing a converter in a methanol vehicle can the fuel injection ratio of the original vehicle be changed, so as to realize the normal and safe driving of the vehicle with different proportions of methanol gasoline and methanol fuel. At present, the products on the market are mixed, please use products with perfect qualifications and many years of experience in methanol automobile business cooperation. For more information, please visit Shanxi Fengxi New Energy Development ******.

Need a methanol controller, different controllers have different installation effects, you can take a look at Zhengzhou Lifu energy technology products, I have used it for a long time,

This thing is very cheap right now, and the 12-speed remote control digital display methanol controller only costs 199 space to have information.

Shandong Yineng Technology Automotive Energy Saving Electronics was established in 2006, I hope it will be helpful to you.

1. Determine the positive pole of the original car fuel injector plug;

2. Check the positive pole of the wire harness fuel injector plug (the red line is the positive pole);

3. Ensure that the polarity is consistent, if it is inconsistent, the wiring harness must be replaced or the line must be changed;

4. The tie wire is fixed firmly;

Methanol controller installation method:

5. Screw the 4-gear switch to 0 gear, start the vehicle, and the idle speed is stable, which is almost the same as the original car, indicating that everything is normal; If the idle speed is found to be unstable, check whether the plug is loose, resulting in a lack of cylinder; If the idle speed is unstable, check that there is no shortage of cylinders, and try to replace the computer box; If the idle speed is still unstable after replacing the computer case, try replacing the wiring harness. If you don't get on the bus, repeat 1-5 items.

6. Add methanol to the fuel tank, it is recommended to clean the fuel tank and oil circuit first, screw the 4-gear switch to 1-gear, start the vehicle, road test, if the power is found to be insufficient, screw the 4-gear switch to 2-gear, the controller has a built-in imported ECU, with self-learning function, the more open the easier it is to use, and the more open the more fuel-efficient.

Methanol controller installation method:

7. Cold start of the cool car, screw the 4-gear switch to 3-gear, do not add gas pedal, take a taxi, if not, wait for 10 seconds and then play, in the area north of the Yangtze River, it is generally 2-5 times in summer; In the area south of the Yangtze River, the car is generally 1-2 times in summer. It is recommended that the owner buy our company's methanol and natural gas cold starter, which is automatically matched with the controller line, and the car is 1-2 times in winter.

8. It is recommended that users add 10%-15% of 90 gasoline, which is better than any additives, which can increase the calorific value of methanol and prolong the service life of oil floats and oil pumps.

Shandong Yineng Technology Automotive Energy-saving Electronics Co., Ltd. provides the most professional and meticulous after-sales service and technical guidance. Let you start a business calmly without any foundation in this industry, and let you specialize in the auto repair industry double your profits. What we build is the platform, what we provide.

Opportunity creates wealth!

If you have time, you can go to the official ** or go on a field trip.

It takes a quarter of an hour to install and repair a car, and it takes more than ten minutes for private car owners who don't understand.

Yike electronic methanol controller, economical, energy-saving, six-cylinder type, customized wholesale and retail!

First, it is difficult to start.

The controller is not in good contact, plugging or fastening the interface, and the fuel system is not working properly.

1. Check whether the oil pump relay is working normally 2. Test the oil pressure, 250-300kpa, the oil pressure is normal.

3. Check whether the fuel is qualified 4. Check whether the oil distributor is leaking and the ignition system is not working properly 1. Check whether the spark plug is wet, the gap is not right, and the electrode is burned or carbon deposited.

2. Check whether the grounding is virtually connected 3. Check whether the battery voltage is normal.

Methanol fuel problem 1, the temperature is too low, low-temperature methanol fuel or cold start device should be used.

2. If the methanol fuel controller fails, replace it with a new one.

To find a good controller to use a small power consumption, can be energy-saving, but the quality should also be good, the current market has more types of products, but the use effect should be better should be Cong, this is in line with these characteristics, and small double easy to use, but also energy-saving. It's a green product.

The explanation on the 1st floor is very cottage.

None of these explanations will solve the cold start problem.

At present, the most reliable and mature cold start is the auxiliary tank system. There is gasoline ignition and gasoline hot car, which is the most mature reform.

Dandong Huizhong's automatic auxiliary fuel tank system is recommended, which is better than the effect of double-track and double-spraying, **The same.

The methanol car modification controller is an engine control equipment that can use methanol and ethanol dual fuel. There is no need to change any system of the vehicle, and you can freely choose industrial alcohol, national standard gasoline, ethanol gasoline, etc. It is installed on gasoline vehicles to save energy and environmental protection and reduce costs.

1.Strong dynamics: the chemical formula of industrial alcohol is CH3OH, which contains oxygen by itself, and has a self-oxygen effect during the combustion process, which makes the combustion more fully uniform, improves the thermal efficiency and enhances the dynamics.

2.Cost saving: After the installation of this system, the combustion of industrial alcohol is only 1 yuan per kilometer (1 yuan per kilometer in the case of national standard gasoline).

3.Good cleanability: automotive industrial alcohol has a strong ability to dissolve impurities, can effectively remove the precipitated and condensed impurities in the fuel tank and oil circuit, and remove the carbon deposits formed in the spark plug, valve, piston top and exhaust pipe.

4.Good environmental protection: the fuel emission tail gas meets the national standard, and the chemical formula of industrial alcohol combustion is:

2 CH3OH + 3 O2 = combustion = 2 CO2 + 4 H2O, it can be seen that alcohol combustion produces carbon dioxide and water, compared with ordinary gasoline and diesel, CO, HC and HO in the exhaust gas can be reduced by 30-50%, and the exhaust gas is cleaner and more environmentally friendly.

5.Good economy and substitution: M85 (85% industrial alcohol + 15% gasoline mixed fuel) and M100 (100% industrial alcohol) automotive industrial alcohol fuel have obvious advantages in terms of economic cost and market competition.

6.Good safety: the flash point of alcohol is higher than that of gasoline (the closed flash point of industrial alcohol is L7, the closed flash point of ethanol is L6, and the closed flash point of 93 gasoline is -36), and the fire risk in the production, ** and use process is smaller than that of gasoline.

Therefore, it is safer to use this system to add industrial alcohol fuel than gasoline alone.

7.The product is quick to install, easy to operate, and easy to promote.

1) Air resistance occurs in hot weather in summer. After methanol gasoline contains alcohol, theoretically speaking, the vapor pressure will increase, but after the oil is mixed, the vapor pressure is strictly controlled, and gas resistance generally does not occur. When driving in summer, in the state of turning on the air conditioning, long-term high-power, high-speed driving of large load and long-term low-speed air-conditioning driving in the urban area, especially after parking for a long time to turn on the air-conditioning, and the ignition time is too late and the mixture is dilute, etc., can cause the engine temperature to rise, thereby produce the phenomenon of air resistance.

As long as the above points are understood and mastered, the air resistance caused by excessive engine temperature will not occur.

2) Poor start-up and acceleration. The occurrence of poor start-up and acceleration is generally related to the poor oil circuit, resulting in insufficient oil supply and dilute mixture. The solution is: check and clean the oil circuit and adjust the ignition time.

3) The oil supply is not smooth. The solution is to check the oil circuit and troubleshoot. According to the summary of the previous use, it is often caused by the use of methanol gasoline because the fuel tank is not cleaned, and the gum particles and other impurities that were originally stuck to the fuel tank wall are washed away, which is caused by blocking the gasoline filter or fuel nozzle.

Automotive methanol gasoline cold start: Automotive methanol gasoline cold start in winter is a major indicator, which is mainly determined by the scientific and technological content of additives. The low temperature resistance of methanol gasoline for vehicles can reach -55, which can fully meet the requirements of nationwide use.

Instructions for installation and use.

1) Unplug the fuel injector of the original car;

2) Plug in the wiring harness and fuel injector plug 1-4 cylinders or 4-1 cylinders in the order of corresponding;

3) The male connector of the wiring harness corresponds to the female head of the original car, and the female connector of the wiring harness corresponds to the male head of the original car;

4) Connect a separate black wire on the wiring harness to any position in the car to ensure full contact.

The mode switch is defined as follows:

Gasoline mode. Methanol mode.

Here's how to check the pattern:

Put the multimeter into the buzzer file, insert the two meter pens of the multimeter into the two holes of the mode switch of the wiring harness, if the multimeter beeps, it means that the current switch state is in gasoline mode, if there is no beep, it means that the switch is currently in the methanol state. Installation documentation.

Kangtuo's products are many in Shandong, the quality of the projection is not very good, and the acceleration will start when the car is hot, and the engine will suddenly turn off, which is very dangerous. The idle speed is also not very stable. The most troublesome thing is the phenomenon of frustration when driving for something. I don't know what the reason is, I hope Kangtuo will study it carefully.

There should be an installation locally, if not, you find a overhaul shop to give them the installation instructions, they should be able to press, and they should be able to wait a little bit for the car to be installed!

The methanol car controller is the size of a teacup lid, and it only takes more than ten minutes to install the teacup lid-sized controller (car control system) under the steering wheel. As long as it is an EFI car, you can sit in the cab and flip the switch to complete the conversion of burning gasoline and burning methanol.

The 12-speed digital display methanol controller is only 199, and the details look at the space.