Is there anything I need to pay attention to when using an insulated ladder?

1. Before boarding the insulated ladder, check whether the appearance of the ladder is intact, whether there is any damage, the connection of each connection is firm, there is no loosening, the ladder corner anti-chemical device is intact and undamaged, and the height should be limited.

2. When the insulated ladder is visited unannounced, the angle between the insulated ladder and the ground should be about 65°, and the ladder should be able to bear the total weight of the staff when carrying tools to climb.

3. When climbing the insulated ladder, someone must support it, and no one is allowed to stand above 1m when the height limit is marked. Do not work on the ladder pedals 2 gears from the top of the ladder. At the same time, when using electrical tools on insulated ladders, safety measures should be taken to prevent induction electric falling.

4. The insulated ladder shall not be extended or used as a height.

5. The ladder should be placed firmly, and the foot of the ladder should have an anti-slip device.

6. The use of herringbone ladders should have strong hinges and zippers that limit the opening.

7. When using the ladder against the pipe and wire, the upper end of the ladder needs to be hung with a hook or tied with a rope.

8. When using insulated ladders on the passage, guardians should be set up or temporary fences should be set up. Insulated ladders are not allowed to be used in front of the door, and measures should be taken to prevent the door from opening suddenly if necessary.

9. The insulated ladder in use is forbidden to move to prevent falling from a height. It is strictly forbidden to throw tools and materials up and down when working on the ladder.

10. When pedaling on the insulated herringbone ladder, you can not stand on horseback to prevent the foot of the ladder from automatically causing an accident 11. When using the insulated ladder in the high-voltage equipment area or high-voltage room of the substation, it is forbidden to use the metal ladder. 12. When moving the insulated ladder in the environment of outdoor substation, high-voltage distribution room and live equipment around the work site, two people should be put down and carried, and keep a sufficient safety distance from the live part.

13. The ladder should be placed in a dry, clean, and well-ventilated room. Unified labeling, fixed placement, not placed outdoors in a humid environment, not stacked with other materials, sundries, bamboo, wooden ladder to do a good job of insect and moth prevention measures.

1. It is absolutely forbidden to exceed the working load of the ladder.

2. The ladder foot has an anti-slip effect. However, it is still necessary for someone to directly hold the ladder with their hands to remind them of protection (and prevent the ladder from being crooked on the side), and step on the foot of the ladder with their feet to prevent the foot from moving.

3. Flat shoes must be worn when climbing ladders to avoid accidents due to slipping.

4. When climbing the ladder or making a filial piety reply, always keep the body in the middle of the horizontal brace of the ladder, keep the body upright, and do not stretch out, otherwise you may have an accident because of losing your balance.

5. When there are people on the ladder ridge, it is strictly forbidden to move.

6. Only one person is allowed to climb the ladder or be on the ladder.

1.Make sure the ladder and environment are legal, and make sure there is solid ground support;

2.When using, it is necessary to use insulated foot covers and safety belts in time to ensure the safety of users;

3.When using an insulated ladder to get close to high-voltage equipment, it is necessary to consider the spine of the pants after the power failure before disassembly and maintenance;

4.When using insulated ladders for high-altitude work, bypass and grounding protection measures need to be adopted, and equipment lamps and lanterns are required to work normally in the normal style of infiltration;

5.Avoid wires close to the surface of the insulated ladder to avoid leakage accidents;

6.During the use of the insulated ladder, it should not be forcefully impacted, twisted, or polluted by pollution, so as not to occur as a safety problem.

1. Zen sail with stable performance and good corrosion resistance;

The good stability and corrosion resistance of the resin give FRP good corrosion resistance, so that the glass cover material can be used for a long time in the corrosive environment of gas and liquid media with different salts, acids and alkalis, and organic solvents.

2. High temperature resistance and superior flame retardant performance;

The high-quality resin and flame retardant additives greatly improve the flame retardant performance of the FRP insulating ladder, the oxygen index is greater than 26, the flame diffusion coefficient is less than 25, and the smoke density is less than 500.

3. Light weight and high strength.

The composite of alkali-free glass fiber yarn and resin makes FRP have unique light weight and high strength characteristics, and its strength-to-mass ratio is 1 4 of steel, which is suitable for various load-bearing structures in corrosive environments.

4. Aging resistance, long service life, safe and durable;

The addition of high-quality matrix resin and anti-aging additives in the processing technology of FRP products greatly improves the anti-aging performance of the product, and the product can maintain its gloss and continuous high strength for a long time, with a service life of more than 20 years.

5. Safe and anti-slip.

In the production of FRP for too long, the use of anti-slip rubber pads with high elastic modulus and different surface effects greatly improves the anti-slip performance of the insulated ladder, and its slight elasticity also reduces the fatigue of the staff to a certain extent. Diamond-shaped, sand-surfaced, double-plane, crescent-sided covers, different covers give the insulated ladder a non-slip performance suitable for use on different occasions.

1. When using the used soft ladder, please check whether the main rope is worn or damaged, whether the connection of the hook ring of the main rope of the insulated ladder is loose or disjointed, and whether the ladder pedal rope is worn or damaged when it is linked to the main rope. If it is found to be worn, damaged, loose, or disjointed, please do not use it for the safety of the user, and beware of illegal use.

2. The soft ladder cannot be used in excess of the bearing capacity (static breaking force 450kg).

3. For high-altitude or down-the-mine operations, it is necessary to use safety safety ropes, and the staff should be equipped with safety belts and safety ropes.

1) Before use: Before each use of the ladder, it is necessary to carefully check whether there are cracks, serious wear and tear and damage affecting the safety of the ladder surface, spare parts, ropes, etc.; When using ladders, you should choose a hard, flat ground to prevent the danger of side crookedness; If the height of the ladder is more than 5 meters, be sure to set up a pull line above F8 in the middle and upper part of the ladder; Check that all ladder feet are in good contact with the ground to prevent slipping; Without the permission of the manufacturer, the ladder shall never be attached to other structures, and the damaged ladder shall never be used and repaired; When the ladder is raised and lowered, it is strictly forbidden to hold the cross brace in your hand to prevent cutting your fingers.

2) When using: it is absolutely forbidden to exceed the working load of the ladder; The ladder feet have a non-slip effect. However, it is still necessary for someone to directly hold the ladder with their hands for protection (at the same time place the ladder on the side), and step on the bottom foot of the ladder with their feet to prevent the foot from moving; When climbing a ladder or working, always keep your body in the middle of the cross brace of the ladder and keep your body upright and not reach out, otherwise you may have an accident due to loss of balance.

Insulated ladders are mostly used in special climbing tools for power engineering, telecommunication engineering, electrical engineering, hydropower engineering, etc. The good insulation characteristics of the insulated ladder ensure the safety of workers to the greatest extent.

Features: (1) Non-conductive, novel appearance, beautiful and generous.

2) Corrosion resistance (with acid resistance, alkali resistance, organic solvent resistance and salt resistance and many other gas and liquid media corrosion performance.) According to the requirements of actual use occasions, phthalate, isobenzene and vinyl resins can be economically selected as matrix materials), anti-decay and fading.

3) Light weight and easy to handle.

4) Low water absorption and good flame retardancy (the flame propagation rate of ordinary flame retardant grilles (ASTM E-84) does not exceed 25; The flame propagation rate of the advanced flame retardant vinyl grille does not exceed 10. Oxygen index not less than 28 (GB 8924)).

5) High strength and light weight (the density of FRP grille is not more than 2, only 1 4 of steel, 2 3 of aluminum.) Its strength is 10 times that of rigid polyvinyl chloride, and its absolute strength exceeds the level of aluminum and ordinary steel), impact resistance, insulation, and excellent magnetic permeability.