Why does the PSP enter the Shendian mode as soon as it is turned on?

You didn't use the Shendian v8 software to restore your little P's "Shendian" to a normal battery.

Restore Magic Battery: Insert the Magic Memory Stick into the PSP host, and then put in the Magic Battery, and the PSP will automatically boot and enter the system. Go to the list of games and select the UPT program to run.

Go to the battery menu of Shendian Production, select Make Normal Battery, and wait for a while for the battery to be restored to a normal battery.

Restore the magic stick (optional): Format the memory stick on the PSP.

The battery is Shendian and naturally enters the Shendian mode, just get the battery back to the ordinary battery.

What is Shendian?If it's a power-saving mode, just reset it to normal.

Answer: There is an emotion called stealth to be visible.

I didn't set it up, so I followed the tutorial and did it again.

Does lz mean that you want to play games while flashing the machine.,What's in the machine is Shendian.,Want him to support booting?

If yes, LZ goes to the next time machine.

Install the time machine first, (if you need a virtual system, remember to put the corresponding official version you need in the root of the memory stick.)

directory,For example,To be,Put it in the root directory),If you just want to boot normally,Don't virtual system,Only select item 1 after entering the time machine,Then exit,Reinstall Shendian v6,After installation,The system will prompt you to enter a key to activate Shendian v6,Generally select the L key,Often press for more than 4 seconds,And then it's done。

Press the L button to turn off the powerhouse to enter Shendian V6 mode, and turn on the computer normally without pressing the button!

Whew, I'm so tired, that's all!It's really hard to type (the keyboard is too hard, hoho).

It's the magic battery that can save bricks of PSP.

Don't think about it.,The official system can't do divine electricity.。。。

Shendian V4,It's just a popular name,The real name should be the magic battery + magic memory stick V4 version,Because the magic battery is just the key to guide PSP into engineering mode,And the program that really plays the function of downgrading、Brick repair and other functions are still on the memory stick,So constantly update the program on the memory stick,You will get more powerful functions。

It's a magical battery in PSP1000 that has been brushed and turned into!

Can be used to flash and restore the system!!

A very powerful cracking tool!

However, only 1000 batteries can be brushed into divine electricity!! 2000's won't work!!

It's still in v4.。。。 Now even Shendian v7 is out.。。。

The so-called Shendian, in layman's terms, is a kind of battery that has been brushed, which can guide the PSP to run the flashing program.

1.Put the magic memory stick that has been made into the PSP you want to operate, and then press the magic battery. The LED on the left side of the PSP will light up red, and after a while, you will be taken to the interface of the Despertar del Cementerio V8.

2.The new interface adopts the style of imitation XMB, which is much more beautiful than the previous program interface, and now we will explain the content of the interface:

Quote: install m33 Note: Option 1 is "flash to m33 homebrew system" directly.

Install ofw Description: Option 2 is "Flash to Official System".

NAND Operations Description: Option 3 is NAND backup or restore

Hardware info Description: Option 4 is "Show PSP Hardware Information"**The hardware information of the current PSP, including the motherboard model, IC model, NAND size, etc.

Test M33 Instructions; Option 5 is "Boot the M33 system from the memory stick" ( Enter"test m33"Homemade firmware testing.

Shutdown Description: Option 6 is "Shut down PSP".

Reboor Device Note: Option 7 is "Restart the PSP in normal mode to enter the system XMB interface Restart the PSP (it will enter the original system)."

3.It is recommended to back up the NAND before flashing, just in case: select NAND Operations Dump NAND, and the backup will be completed in tens of seconds.

After that, we go back to the main interface and select install to flash the machine. Please make sure that the battery level is above 75% before flashing the machine to be safe.

It's just a suggestion, not a man-or-have action.

4.When you're done, press the cross to restart and the circle to shut down. After re-entering the system, you will find that the version of the system information has become.

Keep pressing the R key to drive in to see if you can enter recovery mode, if you can enter, you may still be saved.

Can't connect to a computer...To be activated with Divine Electricity and the Magic Memory Stick.

Is yours 2000 non-v3 and earlier? If it's yes, you can brush it back with divine electricity, but if it's not, it's no fun.

You can go to the store to brush the electricity.

After a complete shutdown,Old P press and hold the L key to boot up the main interface of the V5 enhanced version,Don't press anything to boot up is normal boot。

The new P is powered on by holding the L key after a complete shutdown for the V5 enhanced version of the main interface,And if the new P wants to boot normally,You must upgrade to or higher,If the new P system is lower,It can't be turned on normally with the magic battery,And with the ordinary battery and the magic memory stick or the ordinary memory stick can be turned on normally。

To put it simply: no matter the new P or the old P, if you want to enter the menu of Shendian, press and hold L to turn on; The old P doesn't press anything to boot.,You can enter the XMB to play games normally.,If the new P wants to do this,At least you need the system.,Otherwise, Shendian can only be used as Shendian.。

At the same time, the time machine has also been installed, after a complete shutdown, press and hold the O key to turn on the time machine, and the default is running the system in the memory stick. If you want to use the normal system again, you just need to turn it on without pressing anything after shutting it down.

Now, with the magic combination in hand, players want to brush whatever system they want to put the corresponding system firmware in the root directory of the memory stick, for example, if you want to brush, you have to name the firmware in the root directory of the memory stick, and the same is true for others. Isn't it very convenient?

It's really bricked. It doesn't work with any electricity. You can only change the motherboard, and what can be solved with Shendian is a fake brick.

Hello! Your PSP should be V1, and it should still be the VSH menu, which is the menu that is called out by pressing Select in the PSP operation interface.

You first use the power cord to turn on the machine, and then put the battery in, and finally find the make normal battery item from the menu, press x to confirm, the normal situation should be that the menu flashed, and now your battery should be an ordinary battery, if it still doesn't work, try a few more times.

If it still doesn't work, then try to modify it with Shendian production software, or go to the recovery menu to modify it.

Put in the battery,Press R to turn on,Enter recovery mode,There is an option to turn the battery into a divine power in Advanced,There is also an option to restore the battery to a normal battery,It is generally artificially made into a divine electricity,I think your battery is broken。

Shendian is a PSP downgrade software. It has nothing to do with the battery.

You can use the reply mode to restore the initial settings of the machine, and then reflash the machine (first reply, then level up).