What are the common types of imported scrap hardware?

Scrap hardware and electrical appliances based on steel.

Scrap hardware appliances, wires and cables, motors and motors based on ** copper.

Scrap hardware appliances, wires and cables, motors and motors based on aluminum.

Scrap hardware includes scrap non-ferrous metals such as copper and aluminum, scrap steel, scrap wires and cables, scrap motors and other scrap hardware and electrical appliances.

First, the name of some scrap metal scrap hardware.

1. **Aluminum-based: 6061 aluminum, 6063 aluminum, old aluminum, new aluminum, raw aluminum, shredded aluminum, automobile slice aluminum, strip iron aluminum, 356 hub aluminum, aluminum water tank, aluminum wire with skin, copper and aluminum water tank, can, aluminum transformer, aluminum shell motor.

2. Copper-based: 1 bright copper wire, 1 copper meter, 1 copper, 1 fire wire, 2 copper, 1 copper cable, 2 copper cable, 1 mixed copper cable, miscellaneous copper, clean copper water tank, shredding motor, hybrid motor.

Second, the main problems encountered in the import inspection of scrap metal and scrap hardware.

1. Radioactive pollution: it will cause serious harm to the environment.

2. Industrial slag: It is a mixture of a small amount of copper, aluminum, iron and other metals and a large amount of muck, with very low utilization value and belongs to industrial waste.

3. Waste circuit boards: many substrates are made of thermosetting plastics, which are difficult to use in China, and their surface coatings are easy to cause pollution, and the value of metals is low, so imports are prohibited.

4. Excessive inclusions in mixed metal waste and scraps: the more typical is the waste car slices, in which the waste tires, waste cushions, waste glass, etc. are cut into pieces, which obviously exceed the standard provisions as inclusions.

5. Waste oil seal wires and optical cables: import is prohibited because the insulating oil in it contains toxic substances.

6. Waste transformer: The insulating oil in the large transformer contains harmful substances such as polychlorinated biphenyls, so it does not meet the environmental control standards.

7. Waste electrical appliances: Waste metal, scrap hardware and electrical appliances and waste motors are easy to carry waste monitors, waste machines, waste compressors, waste medical equipment and other waste electrical appliances that are prohibited from importing.

8. Closed containers: It is easy to be entrained in scrap steel, and there is a danger in the furnace process.

9. Entrained soil: Soil is a prohibited item. Imported waste hardware and waste motors are easy to mix into the soil in the collection, transportation, storage and other links, and some also carry animal and plant pests and diseases such as nematodes.

10. Vulnerable waste: Scrap metal is easy to entrain waste warheads and other vulnerable wastes, which are extremely dangerous in the process of storage, transportation and utilization.

Preferably, this supplier needs to have AQSIQ qualification.

A pre-shipment inspection is required before shipment.

Domestic environmental protection approvals are required.

As long as the formalities are complete, there is no problem.

If you don't understand, you can ask me.

The operation process of imported scrap.

The operation process of imported scrap.

1. Scrap tariff: There is a price limit on customs duties, which will change every month, so you should consult a customs clearance company before customs declaration.

2. Process: Foreign suppliers must be registered with the General Administration of Quality Supervision, Inspection and Quarantine of China and obtain the registration certificate of foreign suppliers of imported waste raw materials (AQSIQ). The AQSIQ is valid for 3 years and can be extended 3 months before expiration.

Domestic buyers need to apply for a domestic consignee registration certificate at AQSIQ. This certificate is valid for 3 years, and it will be extended 3 months before expiration.

If you want to import scrap, you must find a processing unit, i.e. a factory. This factory then applies for an import license (commonly known as the environmental guarantee).

The relationship between the above 3 certificates is:

Foreign Supplier Registration Certificate (AQSIQ): For enterprises that have obtained AQSIQ certificates, there will be an electronic key; For waste raw materials from 48 countries and regions including Japan, foreign suppliers should enter the PSI system through the Internet with an electronic key (**: submit an application for pre-shipment inspection.

Foreign suppliers are required to provide a Certificate of Pre-Shipment Inspection (CCIC) - issued by a number of Chinese inspection and quarantine companies after passing the inspection by foreign institutions. Only foreign enterprises with a foreign supplier registration certificate can apply for pre-shipment inspection.

Domestic consignee registration certificate: It is the qualification certification of the domestic consignee in the waste **, that is, the domestic buyer in the international ** by the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China. Scrap is not allowed to be carried out internationally** without this certificate.

The registration certificate of the domestic consignee must also indicate the name of the imported waste processing and utilization unit;

Processing and utilization unit import license (environmental guarantee): It is the certification of the processing and utilization unit of waste by the State Environmental Protection Administration of Chinese mainland. The certificate indicates the import quantity, the port of entry, the entrusted importer (domestic consignee), etc., and the import license is approved once a year.

Three: according to the "Solid Waste Import Management Measures", the import of waste raw materials needs the following information for entry declaration procedures:

Registration Certificate of Foreign Suppliers of Imported Solid Waste that Can Be Used as Raw Materials (Copy);

Certificate of Registration of Domestic Consignee of Imported Solid Waste that Can Be Used as Raw Materials (Copy);

Original Pre-shipment Inspection Certificate;

Solid waste import license that can be used as raw material (inspection and quarantine unit);

Necessary paper or electronic documents such as contracts, invoices, packing lists, and waybills of lading.

China's import of scrap hardware is at a specific time, the domestic economy is developing rapidly, and the raw materials cannot keep up with the needs of industrial development, so only part of the metal can be extracted from the waste products. At this time, China imports a lot of scrap hardware, including scrap hardware, electrical appliances, waste cables, wires and so on from developed countries. As long as there are countries or regions with economic exchanges with our country, they are the best imports of scrap hardware.

Taizhou, Zhejiang Province has scrap hardware from Japan and other countries.

Most of them are large scrap yards that should be concentrated.

Kwun Tong is an industrial building. There are all kinds of ** scraps.

Exit B of MTR Kwun Tong Station.

There are two ways, one is to go to Hong Kong to find the market and negotiate with the owner in person, and the second way is that there are some professional intermediary companies in Hong Kong to do this kind of business, but they need to pay an intermediary fee.

Just come to me and you're good to go.

Get it all done for you.

How much do I need to buy?

You can only talk to them on site, and there are a lot of these waste treatment factories in Yuen Long.

Domestic enterprises need to have two qualifications for the import of scrap hardware, one is the domestic consignee, which is approved by the Inspection and Quarantine Bureau, and the second is the import solid waste license, which is issued by the Ministry of Environmental Protection.

It is forbidden to import 32 varieties of solid waste, such as scrap hardware, scrap ships, scrap automobile presses, smelting slag, and industrial waste plastics.

In order to further standardize the management of solid waste imports and prevent environmental pollution, the Ministry of Ecology and Environment, the Ministry of Commerce, the National Development and Reform Commission and the General Administration of Customs have adjusted the current Catalogue of Solid Wastes that Can Be Used as Raw Materials in the Restricted Categories of Imports, Catalogues of Solid Wastes that Can Be Used as Raw Materials in the Non-Restricted Import Categories and Catalogues of Solid Wastes Prohibited from Importing.

On the 19th, the Ministry of Ecology and Environment issued an announcement on the adjustment of the "Catalogue of Imported Waste Management". 16 varieties of solid waste, including scrap hardware, scrap ships, scrap automobile presses, smelting slag, industrial waste plastics, waste disc scraps, waste motors based on copper, and waste wires based on aluminum, will be transferred to the "Catalogue of Prohibited Imports of Solid Waste", which will be implemented from December 31, 2018.

According to the announcement, 16 varieties of solid waste, including stainless steel waste and scrap, titanium waste and scrap, tungsten waste and scrap, magnesium waste and scrap, vanadium waste and scrap, and wood waste and scrap, will be transferred to the "Catalogue of Prohibited Imported Solid Waste", which will be implemented from December 31, 2019.

Liu Youbin, spokesman for China's Ministry of Ecology and Environment, said in Beijing on the 19th that in order to further standardize the import management of solid waste and prevent environmental pollution, it will prohibit the import of 32 varieties of solid waste, such as scrap hardware, scrap ships, scrap automobile presses, smelting slag, and industrial waste plastics.

In order to further standardize the management of solid waste imports and prevent environmental pollution, the Ministry of Ecology and Environment, the Ministry of Commerce, the National Development and Reform Commission and the General Administration of Customs have adjusted the current Catalogue of Solid Wastes that Can Be Used as Raw Materials in the Restricted Categories of Imports, Catalogues of Solid Wastes that Can Be Used as Raw Materials in the Non-Restricted Import Categories and Catalogues of Solid Wastes Prohibited from Importing.

On the 19th, the Ministry of Ecology and Environment issued an announcement on the adjustment of the "Catalogue of Imported Waste Management". 16 varieties of solid waste, including scrap hardware, scrap ships, scrap automobile presses, smelting slag, industrial waste plastics, waste disc scraps, waste motors based on copper, and waste wires based on aluminum, will be transferred to the "Catalogue of Prohibited Imports of Solid Waste", which will be implemented from December 31, 2018.

According to the announcement, 16 varieties of solid waste, including stainless steel waste and scrap, titanium waste and scrap, tungsten waste and scrap, magnesium waste and scrap, vanadium waste and scrap, and wood waste and scrap, will be transferred to the "Catalogue of Prohibited Imported Solid Waste", which will be implemented from December 31, 2019.

The Ministry of Ecology and Environment said that in order to maintain the safety of the national ecological environment and the health of the people, improve the solid waste import management system, formulate a timetable for prohibiting the import of solid waste by industry and type, adjust the solid waste import management catalogue in batches, and comprehensively use legal, economic and administrative means to greatly reduce the amount of imported solid waste.

Sigh, domestic garbage is increasing day by day! Sad, there is a constant stream of imported garbage! Advocacy, garbage management is endless, garbage classification is the right time!