What do you need to prepare if you want 2 machines to share a network cable?

Two methods. 1 One router 2 network cards.

2 3 network cards One is the main unit.

There are two ways to do this:

1. Install a router, Moden is connected to the WAN port of the router router, and other computer network cables are connected to the LAN port of the router. Open the router (generally enter the open router interface in the browser address bar, enter the username admin password admin to enter), set the router WAN port Internet account and password to automatically dial, and turn on the DHPC service, so that both computers can access the Internet.

2. Add a network card to the computer connected to Moden, make a network cable as a cross line, use this network card to connect with another computer, set the network card IP and another computer IP network segment as or, install ccproxy remote history software in the connected Moden computer (there is a network below), set the network card IP connected to Moden, and then set the gateway in ccproxy**server address to, so that another computer can also access the Internet.

Hope it helps.

There must be a separator, for example, a land rover is one. Then set it according to the instructions on the land gamer, and enter this address into your IE address bar than the one on the land game (depending on what address you have on the manual). You will then be taken to the settings page.

Then follow the settings on your land game to enter your account and password, other IP gateways or something, generally choose to automatically generate. Then click OK. (Each brand of land traveler has a slightly different specific setting, roughly the same, please follow your actual operation).

After the setting is successful, the wide connection on the two computers can be deleted, as long as the moden and the land game are turned on, the computer you turn on is automatically connected, do not go to the wide connection. Direct access to the Internet.

1. Connect the network port of the modem with the WAN port on the router with a network cable.

2. Connect two computers to the LAN port of the router with network cables.

3. Log in to the broadband router, change the broadband router to PPPOE Internet mode, and fill in the corresponding account and password.

4. Save the router's settings and restart the router.

Your account is set on the router, the router activates the DHCP service, and then connects the two computers to the router, and both computers are set to automatically get IP and DNS, and that's it.

The computer store has several boxes that can be separated into several empty boxes, and you can use multiple computers to access the Internet with one network cable.

The router can be wired or wireless, one can be plugged into the main line, and the other sockets can be plugged into the computer network cable at will.

The network cable needs to be jumped, and the computer must be set up.

What's the point of doing this, do you have multiple network cards on your computer? According to the agreement, only one can be used, and the other is redundant.

Multi-WAN router equipment, bandwidth aggregation, intelligent redundancy!! You can check the information to understand.

If T is not a fool switch, it depends on whether it is Layer 2F or Layer 3H, and whether it is divided into 6VLANs

E bite b s 荩 s 荩 pg 绋 ha df

A network cable cannot achieve two people to access the Internet at the same time, and there are two ways to access the Internet downstairs: wired and wireless. The wired must be pulled, and the wireless signal may be poor.

The upstairs can basically realize two people to access the Internet at the same time, but it can't realize that the router that the landlord said is not open, and the 3rd floor can also access the Internet. I made a plan for your current conditions and situation:

1. Materials purchased: a router (about 100 yuan can be done); Network cable: to the downstairs (7th floor to 3rd floor high count 20 meters, horizontal 15 meters, 35 meters), your home count 10 meters.

Of course, redundancy is considered. So the total length of the network cable: 35 10 45 meters.

Generally, the network cable is 2 yuan a meter, so 45 * 2 90 yuan. **Line: 35 meters.

According to the yuan, it is a total of yuan. The total cost is about 200 yuan.

2. Layout (1): First make your home ** line the same line, that is, the ** line that you bought and connect it to your original ** line, and then lead it to the 3rd floor, the people downstairs have cats, so the ** line is connected to the cat. This ensures that you are not at home, you don't need to turn on the router, and he can dial up the Internet.

3. Layout (2): Connect the short network cable to your own computer, connect the LAN port of the router at the other end, connect the WAN port of the router to the network cable of the cat, and connect the ** port of the cat. Then connect the long (35m) cable to the LAN port of the router, and finally the long network cable is also led to the 3rd floor.

This is a guarantee that you are at home, he is at home, and you can all be online. Of course, the router is placed in your home, and after you dial up, two people can access the Internet at the same time.

Summary: The above functions cannot be achieved without spending money on materials. The main line is to realize that you are not at home router does not open, by the 3rd floor of the dial-up Internet; You're at home at the same time, you turn on the router, then dial up, and two people go online at the same time.

Buy a router, buy 2 network cables, 1 short for you and 1 long for others.

** Wire to the cat, between the cat and the router with a network cable, your computer and his computer are connected to the root network cable to the router.

It is more secure to use wired, if it is wireless, the upstairs and downstairs signal may not be good, and the wire should be disconnected.

A router is 100-150, and the network cable is 2 yuan.

It's very simple to use the router.,Whoever the cat is in the house, put it in whom's house.,As long as the router is not powered on, it's okay if you're not at home.

Buy a router on the regular one. Seventy or eighty dollars. You can put it in anyone's house.

Even if people are not at home, turning on the power of the router will not delay other people from surfing the Internet. If you're away from home a lot, you can leave the router at the other person's home. But this one requires you to connect your telecom broadband line to the 3rd floor, (this is more troublesome, I don't know if you will get it yourself.)

It's actually about connecting your home cable to his computer. Then the cat connects to the router, and then takes two network cables out of the router to you and his computer.

Whoever is at home for a long time will put the router in whose house, the network speed of Telecom 4m is enough for two people to surf the Internet, now you already know that the router can solve the Internet problem of two people, then I will briefly introduce how to connect and set it:

- Computer A connection: external network (** line) cat (modem) - router - computer B

Three network cables, two short ones, two meters or the like, one long depending on the actual situation;

Settings: Enter IE: Enter the router, account password:

admin (initial) find the network parameter settings WAN port settings, enter the Internet account and Internet password, and save it, and the IP in the computer can be automatically obtained or manually set;

The equipment you need is a router, three network cables, you don't need to buy the cat if you have it, the approximate price: 100 150 yuan;

Step 1: Connect the two machines as follows:

1.Customized double-machine pair twisted pair (that is, the general network cable), and the general line connection is different, the need for 1326 type, that is, a total of 8 thin wires in the twisted pair, one end is arbitrarily connected to the crystal head, and the other end needs to connect the original 1 --- to 3, 2--- to 6, 3--- to 1, 6--- to 2,4578 The order remains unchanged, and the order at the other end becomes (36145278).

Travelers. border="0"

2.Plug the network cable in.

3.Set hosts, subnets:

Gateway: (empty).

Another machine:,Subnet:

Gateway: In this way, the two machines can be interconnected.

Step 2: Share the Internet.

The premise is that you have two network cards on your host, one of which is as set above, and the other is connected to the Internet and has its card set to share

Right-click --- properties --- check before Advanced --- Internet Sharing! (If there is only one network card, there will be no advanced this item, and your operating system must be 2000 or XP or above) If there is still no Liangxian, please add!