How to place a bee trap How to install a bee trap

1. Brush the compartment with honey;

2. Place the beehive on the side. If there is no queen bee, it may all go into the hive automatically.

3. If you only go in and out of the newly made beehive, it means that you have succeeded. On a rainy day, when the light is very low, the temperature in the room can be lowered as much as possible, and all beehives will go in.

Fourth, close the beehive door and move to the place you want to place.

5. If you continue to enter and exit from the new hive and the original place, it means that there may be a queen bee in the original place.

1.Equip yourself with protective clothing. Long-sleeved, long-trouser clothing, tie the cuffs and trouser cuffs when wearing, a large-brimmed straw hat, a large piece of yarn draped from the hat to the shoulders and bonded to the garment, long-sleeved gloves;

2.Pay attention to where you are coming in and out. Find the location of the queen bee as much as possible;

3.The humidity in the air is high in rainy weather, and the activity of bees is limited when the light is particularly low, and there is not much activity when the temperature is particularly low. There should be no floral fragrance and red, color, etc. in the room;

4.After getting ready, put on protective clothing, open the homemade beehive, and shovel all the original honeycomb with knives, shovels and other tools and put it into the beehive;

5.Moving to the ideal location is a success. All you need to do is open the small door of the beehive. It is best not to put it indoors.

Place it under an open tree and sit north facing south.

Summary. Put several bee traps in one place.

Hello Dear Bee Trap Bucket is suitable for placing under mountain cliffs or forest edges in the wild. In general, the distance between them can be around 100 meters.

The bee trap bucket is placed in a row with an interval of 1 to 2 meters, and the door is staggered by 45 degrees.

Bee traps are suitable for placing under mountain cliffs or at the edge of forests in the wild. In general, the distance between them can be around 100 meters.

The bee trap is placed in a row at an interval of 1 to 2 meters, and the door is staggered by 45 degrees I hope it can help you!

Put several bee traps in one place.

Dear, hello, is answering this question for you, you need to wait patiently for about five minutes, the answer will be revealed for you immediately, please don't worry!

Put a few bee trap buckets in one place, hello dear bee trap buckets, suitable for placing them in the wild, under the eyes of the cliffs, or at the edge of the forest. In general, the distance between them can be around 100 meters. The bee trap buckets are placed in a row with an interval of 1 to 2 meters, and the bee trap buckets are staggered at 45 degrees at the door, so that they can be placed under the cliffs or at the edge of the forest in the wild.

In general, the distance between them can be around 100 meters. The bee trap is placed in a row at an interval of 1 to 2 meters, and the door is staggered by 45 degrees I hope it can help you!

You mean bee traps, right? Take some beeswax to boil, melt it and wipe it in the bee bucket, and then take it to sit on the north and south side of the mountain, under the big tree, under the telephone pole, etc., all the places suitable for the bee nest can be placed, and the autumn bee season can be checked once in two or three days, and if you see the bees in it, you can move back to your residence to breed.

<><1. Time: There are two main types of target bee colonies for bee trapping, one is the sub-bee colony, the other is the migratory swarm, from the point of view of the target bee colony, the best time to lure bees is the local natural bee period and the high migration period, in which the natural bee period is mostly concentrated in March and May, and the high migration period is mostly concentrated in July and September.

2. Treatment: The bee trap bucket can only be lured after treatment, the most common practice is to smear beeswax on the inner wall and near the nest door, the principle is that beeswax has a natural attraction to bees, and honey or sugar can also be placed in the bee trap barrel to attract bees, but most of the honey shouting change sedan and sugar are collected bees and ants.

3. Location: The location of the bee trap determines the bee trap effect, one is that there must be wild bee colony activities nearby, the second is that there must be a rich nectar source nearby, the third is that the surrounding environment must be quiet, the fourth is that it must be sheltered from the wind and the sun and warm in winter and cool in summer, and the fifth is that the enemies such as wasps must be as little as possible.

To sum up, the bee trap bucket is a commonly used bee trap tool, before using to apply some beeswax on the inner wall and the door of the nest, the principle is that beeswax has a natural attraction to bees, and then placed in a place that conforms to the nesting habits of bees, such as under the big trees, boulders, and raised mountains where there are wild bee colonies and rich honey sources nearby, which are particularly suitable for bee trapping.

1. The location number of the bee trap bucket should be obvious. A little red in the green bushes. In front of me, all of them were green, and there happened to be a red flower there. It's easy to find this red. This is where the bee trap bucket will be placed.

2. This is obviously the goal. Distinctive, special location, whether it is a little bee or we are human, it is the same.

In order to successfully attract bees, you can choose the following aspects: choose a high volatility bee pheromone, place the bee trap, control environmental factors, use visual signals, and add food at the right time.

1. Choose bee pheromones with high volatility.

Commonly used are fragrant bee yeast, bee youth, etc., these pheromones are highly volatile and can effectively attract bees. The type and concentration of pheromones directly affect their range of information transmission and attraction to bees.

2. The location of the bee trap bucket.

The trap should be as close as possible to the active colony or bee flight path, which allows more bees to receive pheromone signals. At the same time, you should also avoid getting too close to other bee colonies or food**Li Drafthu to prevent the bees from leaving in a dilemma.

3. Control environmental factors.

Temperature, humidity and wind speed will affect the volatilization and diffusion of pheromones, so warm, humid weather with low wind speed should be selected to lure bees. Avoid operating in bad weather with low temperatures, dryness, and strong winds, as it is difficult for information to spread effectively and attract bees.

4. Use visual signals.

In addition to pheromones, color is also an important factor in attracting bees. The color of the bee trap should be mainly blue and yellow, which are the two colors that attract bees the most. Brightly coloured bee traps are easier for bees to spot and help guide bees closer.

5. Add food at the right time.

In the early stage of bee trapping, a certain amount of syrup or pollen can be added to the bee trap bucket, which can satisfy the bees' food and worship needs, encourage them to stay in the bee trap bucket, and lock more bees through pheromones.

1. Place the bee trap under an open tree, sitting north and facing south.

2. The door of the bee trap must be facing away from the direction of the wind. Because if the wind blows into the barrel, it will disturb the honey bees. Even if a bee comes in, it won't stay in it.

3. The bee trap must be higher inside than the outside, that is, the bottom of the bucket should be higher than the bee door. Because the inside is higher than the outside, it can be drained, and if there is moisture, it will be left from the inside, and there will be no phenomenon of water accumulation. Otherwise, if there is stagnant water in it, bacteria will be produced, and bees will not live here.

1. Bee trap conditions: the bee trap bucket should be placed in a place where there are wild bee colonies nearby, otherwise the bee trap bucket will not be able to lure bees if it is rotten, the easiest way is to observe the honey collection of bees.

2. Honey pollen source conditions: bee trap buckets should be placed in places with rich honey pollen sources, because bees are inseparable from honey pollen sources for survival and reproduction, and if there is a lack of nearby honey pollen sources, there will be no bees to come to nest and settle, so when putting bee trap buckets, we must investigate the nearby honey pollen sources.

3. Conditions for bees: the bee trap bucket should be placed in a place that conforms to the bees' nest-finding habits: one is that the surrounding environment must be quiet and rarely disturbed by humans and animals; The second is that the location must be sheltered from the wind and sun, and warm in winter and cool in summer; The third is that there are eye-catching signs nearby, so that the worker bees can locate the hive.

To sum up, the placement of the bee trap bucket determines whether the bees can be lured to a large extent: one is that the bee trap bucket must be placed in a nearby place where there are wild bee colonies; The second is that the bee trap must be placed in a nearby place with abundant sources of honey powder; The third is that the bee trap bucket must be placed in a distribution that can match the bees' nest-finding habits.

The best way to use a bee trap to keep bees away is to place the trap in the center of the bee colony in an outdoor space in town, such as a garden or park. The bees will explore the surrounding empty canopies and eventually discover the bee trap. Once the Beetrap is found, they will leave their current location and move into the Beetrap, freeing the town from bees.