How to make a chair model? The chair making process

What materials is the landlord going to use to make it?

The wooden one is relatively simple, find some wooden keels, or wooden edge strips (generally square), simply find a chair, draw a drawing, of course, you need to have the right tools, such as a small saw, a small carving knife or something, easy to punch, slotting.

I'm talking about a model of a smaller chair, hehe

It is recommended not to use a nail gun to nail, with a mortise and tenon structure, troublesome, but beautiful.

1. Draw a sketch.

We're going to start by sketching out the shape of the entire deck chair.

2. Materials. A whole piece of wood is divided into several small pieces according to the dimensions of the chaise longue on the drawing, and then each piece of wood is preliminarily processed.

3. Scribing. Cut out a 1:1 sketch of the recliner and bring it to the divided wooden block for comparison, and then take the wooden block to the cutter for cutting.

4. Grinding. Cut out a 1:1 sketch of the recliner and bring it to the divided wooden block for comparison, and then take the wooden block to the cutter for cutting.

5. Splicing. The next part is to splice each part of the recliner on the operating table to see if the docking surface is flat and tight.

6. Slotting. We mark the position of each joint with a pencil and then take each part to the machine for grooving.

7. Fixed. After the groove is opened, the owner uses his own mortise and tenon nails to drive into the notch, and then evenly coats the joint area with adhesive to splice and fix each part.

8. Cut cowhide.

The tool for cutting the strip is made by the owner himself, the width of the cut can be adjusted, and the blade on it can be replaced. Often, after we finish processing the leather strip, we have to coat a layer of polyurethane on it, which will make the surface of the leather look darker, and it is softer to sit on, with strong water and oil repellency, and good water resistance.

The chair is made as follows:

1. First of all, take apart all the wood clips.

2. The back of the chair needs four pairs of clips; Apply the clips with white latex and glue them in order. Spare.

3. The cushion of the chair: The cushion needs four pairs of clips, and the clips are glued in turn.

4. Three pairs of clamps are required for the armrests of the chair; Make the armrests of the chair and glue the finished armrests to the side of the chair cushion.

5. Finally, glue the wood clips to each part and let them dry.

The development of chairs.

In the Song Dynasty, an official hat chair was developed, which was named after its shape similar to the official hat of the ancient **. There are two types of official hat chairs: the south official hat chair and the four-out head official hat chair. The way to distinguish is to see whether the two ends of the brain, the front end of the left and right armrests are out, and the one that does not come out is the Nanguan hat chair.

When we sit in the hat chair, the weight is transferred from the legs and feet to the hips and thighs, and the weight is also distributed to the arms and head.

To the middle and late Qing Dynasty furniture, and the Ming Dynasty furniture is different, although inherited the Ming Dynasty furniture structure on some traditional practices, but the shape tends to be complex, the style is gorgeous and heavy, the lines are straight and hard, the carving increases, but ignores the rationality of the furniture structure and the coordination of the human body use function, so the furniture of this period appears to be large in scale and heavy, and at the same time has the kind of officialdom to show wealth, status of the style, people call it "Qing style furniture".

1. Open 3DMax and select the standard primitive box in the creation panel on the right.

2. Draw a box in the view and modify the parameters.

3. Left-click the mouse to select the drawn box, right-click, and select Convert to Meshable in the pop-up right-click menu.

4. Press the number 4 key to enter the polygon level, then select the two sides in the perspective view, find the "Extrude" option, and set the value.

5. Repeat the previous step, extrude the upper and lower surfaces, and extrude the lower one more time.

6. Select the extruded surface below in the perspective view to extrude 3 times.

7. Select the whole object, then select 1 in the "Smoothing Group", and then perform a first-level smoothing operation on the object.

8. Press the number 1 button, and then enter the dot level to set the shape of the object.

9. Go back to the standard primitives list and select the Box command, then draw a 5x5x5 cube in the top view and set the number of segments.

10. Select the drawn box, then right-click and select "Convert to Mesh", then press the number 4 key to enter the polygon level, select a face below in the perspective view, find the chamfer command, set the chamfer value, repeat the chamfer operation 10 times, and the chair leg will be successfully made.

11. Select the made chair leg, add a bend modifier to it and set the parameters.

12. Then select the made chair legs, then press the shift key to copy three more and adjust the position.

The tutorial on how to make origami in a small chair is as follows:

A piece of colored paper, divided into 6 equal parts.

<>9. In the end, we got a small origami chair.

The benefits of children doing crafts.

1. The child's creative personality can be maximized, and the child's thinking is more open than other activities in the handicraft, and the existing level can be fully expressed. The creation of imaginary things by handmade methods can develop children's observation, memory, imagination and creativity in the process of moving from virtual to real, which is conducive to the development of the brain.

2. Handmade can cultivate children's self-confidence, children independently complete a handmade work is needed to use both hands and brains, in this process he will encounter a lot of problems, if you can insist on finishing, it is also a manifestation of perseverance, no matter what kind of handmade finished products of the baby, should be given praise and affirmation, so that children can build self-confidence.

Hello dear, I'm glad to answer for you! Chair making process 1First of all, we must choose bamboo, choosing the right bamboo is the first step, according to the needs of the seed, what quality, new bamboo or old bamboo should be clear.

2.Prepare the tools you need, such as woodworking saws, chisels, and axes, which are essential for making bamboo chairs. 3.

Determine the amount of bamboo you need, so that you don't waste bamboo, you must have a number in your heart to use it, and you can't do it blindly. 4.According to the type of chair you have determined, make holes with a tool, and put them aside after the holes are raised, ready for linking.

5.The bamboo is interspersed and linked, and the various links are connected, so that it can be made into a good bamboo chair, so that the chair is made. Thank you for your consultation and hope mine can help you!

I wish you a happy life!

Overview. <>

The frame part of the Enfield side chair is connected by a round tenon, and the backrest part is a square tenon. Viewed from the side, the rising stare is leaning backwards and looking down into a trapezoidal shape.

Leg mortise markings.

The mortise position is marked on the square material for post-processing.

Milling mortise and tenon turns into cylinders.

Using bakelite milling, the mortise is milled out. After that, the timber will be turned into the required noisy columns.

Car out details. > on the cylinder to carve out the details and various tricks.

Heat the wood. > the wood from the backrest is heated in a pipe with steam to bend it.

Cooling forming. > the heated wood is snapped into a designed mold to cool and form. Once the shape is fixed, the surface is sanded smooth.

Drill mortise. <>

Use a bench drill and a hand-held drill to machine round mortise on the chair legs.

Assemble. <>

Glue the joints and assemble the individual parts.

Weave the sitting surface. > the seat surface of a chair woven with hemp rope.

The process of making the Enfield side chair is relatively simple, and the complex is that the chair connection involves too many angles and needs to be carefully marked for the perforation. The simple hot bending technology is used for the backrest, which improves the utilization rate of wood. The seat surface is made of hemp rope, which is a combination of different materials and increases the comfort of the chair.

Kiss, <>

We're glad to answer your questions! Whether it is the angle of inclination of the seat and the cushions, the addition of leather details on the armrests, or the perfect and soft connection of the various parts, it shows a meticulous thinking about the user experience. The Furniture for Everyday Life Chair is a kind of furniture for everyday life with a backrest and armrests.

Modern chairs pursue beauty and fashion, some chairs are no longer just used as seats, and with the combination of science and technology, the answer makes human life more convenient. Hope mine can help you! <>