The practice of handmade teapots in kindergartens, the production of handmade teapots

Do kindergarten handmade teapot prepare a piece of white paper along the diagonal.

Fold in half to create creases. Grasp the diagonal line and fold it into a diamond shape, and fold the two sides in half in the middle, and the front and back sides should be stacked. Then, fold upwards to form a diamond shape.

Both positive and negative. Turn it over and bend both spouts as illustrated. Dip the corner of one of the spouts inside.

Fold one side downward, both heads and tails. Dip the sharp corner down into the hole. After folding, you can draw some of your favorite patterns on it and paint some beautiful colors.

Extended information: Kindergarten simple handicraft.

Materials: plastic cola bottles, colored cardboard, scissors, double-sided tape.

Paintbrush. Directions:

1. Use a pen to draw 2 rectangles of different sizes on 2 pieces of cardboard of different colors and cut them out (the length of the large rectangle is the same, and the width of the large rectangle is twice the width of the small rectangle).

2. Wrap the small rectangle in the middle and lower part of the bottle with double-sided tape, and wrap the large rectangle in the middle of the bottle, and there is no gap between the two sheets of cardboard.

3. Cut a circle and make a cone.

Cover the neck of the bottle and fix it with double-sided tape, then cut a small circle and stick it to the top of the cone to make a cute little hat.

4. Use a pen to draw the main body parts of the small animal such as feet, hands, ears, and mouth on the cardboard, and then cut it with scissors and paste it on the appropriate part of the bottle to indicate the feet, hands, ears, etc. of the small animal. (If necessary, you can also decorate the critter by cutting ties, flowers, etc.)

5. Use a black paintbrush to draw eyes, noses, and mouths on the faces of small animals, so that cute plastic bottles.

The critter is ready.

1. Finger a rainbow.

Preparation list: paints, drawing paper.

Difficulty:

2. Romantic fireworks.

2. Because the glue is easy to dry, we draw one and pour some flour on it.

3. After each firework is dipped in flour, you can paint it with watercolor on the fireworks The texture of the flour makes the painted fireworks more feeling

3. Color gradient paper flowers.

Preparation list: cake paper, paintbrushes, a glass of water.

Difficulty:

Rich and vibrant colors are the best way to catch your child's eye, and with a playful and creative twist, they're sure to love it

Toddler handmade teapot steps Method 1The inner and outer walls of the purple clay pot made of the mold are polished relatively smooth, and the handmade pot should be finely polished on the mud bench, and the wood grain of the mud stool will be left on the inner wall after it is done. 2.

The bottom and wall of the pure handmade purple clay pot are carried out separately, but the purple sand mud is modulated at the same time, and this time difference causes the pot to form a circle of obvious inlay marks at the bottom of the pot after being burned. If it is a purple clay pot made of mold, after it is burned, there are no obvious traces at the joint of the back bottom cover. 3.

The handmade round pot has only one joint, and an inconspicuous seam line can be seen in the handle of the pot. The pot formed and fired by mold has a relatively obvious seam line on the inside of the spout and handle. The value of the pot lies in whether the spirit and charm of the pot are sufficient and full, whether the pot shape is regular, whether the proportion is harmonious, whether the mud is good, and whether the workmanship is meticulous.

whether the curve is natural; If it is a flower product, then whether the flowers and trees on it are natural and natural, without any pretentiousness.

Do children like to raise flowers and plants? If you have potted plants at home, a watering can for glue is indispensable. Today we are going to learn about the small production of waste utilization, which is to make a mini watering can with cardboard and disposable paper cups, which can really hold water, but not spray

The drawings that need to be printed are printed on the color cardboard and made into nozzles, handles and handles.

The drawings are printed, and the banknotes, glue sticks, and scissors are also prepared.

Cut out the printed jammed paper and apply glue to the nozzle part of the jammed paper.

Fold it along the dotted line and stick it on the side of the paper cup.

Finally, paste the cardboard strip to the side of the cup to make a handle and handle, and the cute paper cup watering can is made

The making of the handmade teapot is as follows:

Pot body production] 1. The mud is beaten into a piece.

2. The professional circle plans to make the mud of the body of the pot into pieces and wait for the bottom of the pot to be drawn.

3. Still use a circle to plan the bottom of the pot.

4. The body and bottom of the pot are preliminarily inlaid.

5. Shoot out the prototype.

6. Lao Yixing often said: The teapot is photographed.

7. The beating and forming of the body barrel is not a simple step, but a number of repeated steps. Each step is close to the final molding stage, but the requirements for each step are different.

8. Pat the bottom of the pot flat.

9. Hook the bottom of the pot.

10. From the high and deep cylinder to the final virtual flat shape, it is completely made by hand, and then needs to be carefully trimmed.

Lid production] 1. Compare the shape of the spout to make a prototype of the lid.

2. The lid is welted.

The parts of the pot are inlaid with each other].

1. Device the only parts of the body of the pot, and rub out the handle.

2. The pot handle is formed.

3. The handle and spout must be in a straight line, and there is no difference. One of the great beauties of the pot shape is also in this rule.

4. The prototype of the spout.

5. Carefully hollow out the spout.

6. The opening of the hole, whether the hole is open or not, directly affects the water macro scattered culture.

7. Preliminary shaping of the pot body.

8. The pot button is formed.

9. Fill the pot button, open the air hole and polish it finely.

10. The final shaping and refinement of the whole pot. At this step, the production of the purple clay pot body is preliminarily completed, and it only needs to be engraved with a pattern or fired directly in the kiln.

Engraved firing] The carved pattern on the body of the pot is fired into a kettle.

Maybe it's just a pair of rough hands, just a lump of mud in the ground, combined, a knife, step by step, supplemented by the mind of quietly digging socks, Nirvana out of a beautiful purple clay pot.

The first process of making a pot is to start beating mud sheets, mud strips, and then making a body tube after the mud is processed. After the pot mud strips are laid, prepare the bottom full sheet at the same time, put the slices on the turntable, and enclose the mud strips with the interface. After the outline of the body of the pot is completed, it is necessary to use a wooden paddle to roll out the required accurate pot shape, and the wooden paddle is particular about cypress, jujube, and mahogany in recent years.

The standard pot body tool made of bamboo is called grate, the arc of bamboo is used, and the arc of the pot body is made with oblique chisel and file finishing to make the arc that conforms to the outer contour line of the pot body, and the pot body is placed on the wooden turntable when used, and the grate is only used to drag the body clockwise to make the pot surface smooth and regular.

Glue the neck of the pot to the body of the pot and call it a large one. The upper foot is envious, which is to connect the pot foot ring with the pot god's smile and regret. The upper spout is to connect the lid with the spout.