What are the traffic signs and what are the common traffic signs

There are 7 types of traffic signs:

Warning Signs, Prohibition Signs, Instruction Signs, Guiding Signs, Tourist Area Signs, Road Construction Safety Signs, Auxiliary Signs.

Road traffic signs.

Road traffic signs and markings are a kind of safety management facilities that use patterns, symbols, and words to convey traffic management information and control and guide traffic. The traffic signs specified in the Road Traffic Signs and Markings are divided into seven categories:

1) Warning Signs: Signs that warn vehicles and pedestrians to be aware of dangerous locations.

2) Prohibition signs: signs that prohibit or restrict the traffic behavior of vehicles and pedestrians.

3) Indication signs: signs indicating the movement of vehicles and pedestrians.

4) Guidance signs: signs that convey the direction, location, and distance of the road.

5) Tourist area signs: signs that provide the direction and distance of tourist attractions.

6) Road construction safety signs: signs that inform the passage of road construction areas.

7) Auxiliary signs: Signs attached to the main signs to assist in the use of instructions

The prescribed road traffic markings are divided into three categories: ?

1) Indication markings: markings indicating roadways, driving directions, road edges, sidewalks and other facilities.

2) Prohibition markings: special regulations such as compliance, prohibitions, and restrictions on road traffic, and markings that vehicle drivers and pedestrians need to strictly abide by.

3) Warning markings: Encourage vehicle drivers and pedestrians to understand the special conditions on the road, increase vigilance, and prepare for preventive measures.

Instructions, warnings, prohibition signs.

Instructions, warnings, prohibition signs.

Directional signs are also a type of indication sign.

That's all there are three. Other classifications don't make much sense.

Traffic signs are divided into instructions, warnings, and prohibition signs.

There are 6 main types of traffic signs:

1) Warning signs are signs that warn vehicles and pedestrians to pay attention to dangerous places, with signs such as roundabouts, attention to children, and continuous detours.

(2) Prohibition signs are signs that prohibit or restrict the traffic behavior of vehicles and pedestrians, including signs prohibiting traffic, prohibiting temporary or long-term parking, prohibiting overtaking, prohibiting left turns, limiting height, limiting speed, etc.

(3) Indication signs are signs that indicate the direction of travel of vehicles and pedestrians, including signs such as going straight, turning left, driving around the island, and pedestrian crossings.

(4) The guidance sign is a sign that transmits the direction, location, distance and driving route information of the road, and is a kind of service sign, including the entrance notice, the starting point of the expressway, the toll station notice, the emergency parking zone and other signs.

(5) The sign of the tourist area is to provide a sign to identify the direction and distance of the tourist attraction and understand the tourism items and categories.

(6) Road construction safety signs are signs that inform road traffic blocking, detouring and other information.

Highway traffic signs are divided into two categories: main signs and auxiliary signs. There are four main signs: warning signs, prohibition signs, instruction signs, and guidance signs.

The role of various signs:

1) Warning signs are signs that warn vehicles and pedestrians to pay attention to dangerous places;

2) Prohibition signs are signs that prohibit or restrict the traffic behavior of vehicles and pedestrians;

3) Indication signs are signs that indicate vehicles and pedestrians;

4) Guidance signs are signs that convey information about the direction, location, and distance of the road.

Auxiliary signs are signs attached to the main sign and play the role of auxiliary explanation, which are divided into types such as time, vehicle type, area or distance, warning, prohibition reason, etc.

It can be divided into four types. Indication signs; It is usually round and rectangular, with a white pattern on a blue background. It is used to instruct vehicles and pedestrians to drive in the specified direction and place.

Such as going straight, turning left, turning right, stopping, detouring, etc. Warning signs: usually equilateral triangles (or diamonds), yellow (white) with black (red) edges, black (or dark blue) patterns.

It is used to warn the driver of the dangers and measures that must be taken on the road ahead. Such as warning intersections, road turns, railway crossings, slippery sections, possible rockfall sections, uneven roads, confluence traffic, etc. Prohibition Signs:

It is usually round, with red edges on a white background, red slashes and black patterns. It is a sign that prohibits or appropriately restricts vehicles according to the number of streets, highways and traffic. Such as no traffic, no parking, speed restrictions, weight restrictions, width restrictions, etc.

Guideway signs: usually rectangular in shape, with white letters on a blue (green) background and a white pattern. It is used to indicate the boundaries of towns and villages, the direction and distance of destinations, the entrances and exits of expressways, service areas, and famous locations, etc., and provides various directions along the way.

Such as national highway numbers, milestones, 100-meter piles, demarcation monuments, guidance signs, place name plates, as well as highway entrances and exits, gas stations, repair stations, parking lots, etc. The auxiliary sign is attached to the main sign and serves as a supplementary illustration. It can be divided into four types: vehicle type, time, range, and distance.

Auxiliary signs cannot be set up separately.

The full weight of the vehicle, of course! Imagine: your vehicle weighs 20 tons and carries 80 tons of cargo, total:

100 tons. Take one to three as an example, four axles are 25 tons per axle, when a bridge is limited to 50 tons, if you can pass by the axle load, after the whole car goes up, you dial 122**! (The traffic police admonish, really don't try).

Refers to the entirety of a road.

For example, the sign indicates === No parking on the whole route.

The sign indicates that === the whole route is prohibited.

Common traffic signs include indication signs, warning signs, prohibition signs, guidance signs (general road guidance signs, highway guidance signs), tourist area signs, road construction safety signs and other categories.

Road traffic signs are graphic symbols that display traffic laws and road information, which can make traffic laws get vivid, specific and concise expressions, and also express the content that is difficult to describe in words, so as to manage traffic and indicate the direction of driving to ensure the smooth flow of roads and driving safety. Suitable for highways, city roads and all special roads. It is in the nature of a decree and must be complied with by vehicles and pedestrians.

Introduction to common traffic signs:

Warning signs: These signs are designed to alert vehicles and pedestrians to dangerous locations, and when car owners see these warning signs, they need to be extra cautious when driving through these sections.

Indication signs: This is the direction of the driving vehicle reminder, the owner sees such a sign, and needs to make a driving decision according to his driving direction, so as to ensure the smooth driving of vehicles on the road.

Highway guidance signs: the highway is endless, and the speed of the vehicle should also be required, in such a highway, the owner often does not know where he has arrived during the driving process, and the highway guidance sign will indicate the location, so that the owner can clear himself where he has been, how far away from the goal.

Auxiliary signs: Usually some road sections are marked with special signs, the purpose is to ensure that the vehicle is better and smoother.

Road traffic signs and signs: Usually there are many markings on highways, and different markings also have different meanings, if you don't pay attention, the owner may face a penalty decision, which is what the owner of the car distinguishes and pays attention to.

Road construction safety signs: If you see road construction safety signs on the highway and see such signs, it means that construction is underway ahead, and if the vehicle wants to pass forward, then you can only turn around.

Prohibition signs: When you see these signs, there will be restrictions on the road ahead, pedestrians, or which vehicles cannot enter, so car owners also need to pay extra attention.

Dear, I'm glad to talk to you about answering the question of what are the traffic signs. Dear, here for you to find the traffic signs are: 1) Warning signs:

Signs that warn vehicles and pedestrians to pay attention to road traffic 2) Prohibition signs: signs that prohibit or restrict the traffic behavior of vehicles and pedestrians 3) Indication signs: signs that indicate what vehicles and pedestrians should follow 4) Guidance signs:

Signs that convey information about the direction, location, and distance of the road 5) Tourist area signs: signs that provide the direction and distance of tourist attractions 6) Operation area signs: signs that inform the road operation area of traffic 7) Notices and signs:

Signs informing you of off-road facilities, safe driving, and other information.

Traffic signs are: warning signs, prohibition signs, instruction signs, guidance signs, and tourist area signs.

1. Warning signs

Serve as a warning. Warning vehicles and pedestrians to signs of dangerous locations. The color is yellow background, black edge, black pattern, and the shape is an equilateral triangle with the top corner facing up.

2. Prohibition signs

It has the effect of prohibiting certain behaviors. Signs prohibiting or restricting vehicular and pedestrian traffic. Except for individual signs, the color is white background, red circle, red bar, black pattern, pattern pressure bar; The shape is round, octagonal, and equilateral triangles with the top angles facing downward.

Installed near road sections or intersections where vehicle or pedestrian traffic is prohibited or restricted.

3. Indication signs

Indicative. Signs indicating the movement of vehicles and pedestrians. The color is blue background and white pattern; The shapes are divided into circles, rectangles, and squares; Set up near a road section or intersection where vehicles and pedestrians need to be instructed.

4. Guiding signs

Serve as a guide. Signs that convey information about road directions, locations, and distances. In addition to milestones and 100-meter piles, the colors are generally blue background and white patterns; Highways are generally green with white patterns; The shapes are generally rectangular and square, except for place identification signs, milestones, and confluence signs.

Set up near a road segment or intersection where road directions, locations, and distance information need to be transmitted.

5. Tourist area signs

Provide signs of the direction and distance of tourist attractions. The color is brown background and white character pattern; The shape is rectangular and square, and the tourist area signs can be divided into two categories: guide signs and tourist symbols, which are set up near the road section or intersection that needs to indicate the direction and distance of the tourist attraction.