How do I clean the detergent sink in my washing machine?

Laundry detergent in a fully automatic washing machine.

Cleaning of the box: 1. Wipe it off with a towel, and it is recommended to soak it for 2-3 hours. After washing, soak for 1 hour to add 1 cleaning and skip the pre-wash setting. When the washing machine is used frequently, choose the main washing program directly.

2. Turn off the power and soak for 1 hour. For the first time or when the dirt is severe, it is recommended to soak for 2-3 hours.

3. After cleaning, if there is dirt remaining on the inner wall of the washing machine, wipe it off with a towel.

4. You can also use a small brush dipped in bleaching water (some bleaching can remove dirt residue) to scrub, it is best to use laundry detergent when washing clothes, and there will be no residue when adding it directly to the washing machine.

It is usually poured into the leftmost slot. Washing machines are usually equipped with three slots, of which detergent or detergent is usually poured into the leftmost slot, which is connected to the main washing program of the washing machine. As for the slots marked with plum blossom patterns in the middle, they are generally used to put fabric softeners, so that the clothes can be washed more supple and do not fade.

The rightmost tank is generally only used when the user needs to use the pre-wash function to disinfect or soak the clothes, and when using it, you can pour disinfectant or laundry detergent into the tank according to your needs. If the pre-wash function is not required, the tank does not need to be used.

Precautions for the use of washing machines

The temperature of the washing water should not be too high, generally 40 degrees, and should not exceed 60 degrees (except for drum high-temperature disinfection washing machines), so as not to burn the washing drum and cause damage to the plastic parts.

It is best not to close the lid immediately after the washing machine is finished, there will be a small amount of stagnant water in the washing machine after washing clothes, and the stagnant water is easy to breed bacteria, so you should drain the water in the drum first and wait for it to dry before closing the lid of the washing machine to avoid breeding bacteria.

Washing method of drum washing machine laundry detergent and upper inlet sink:

1. Open the washing machine box, press this button in Jane, take it off, you will see a lot of dirt, clean it, wipe the inside of the box, and put it back in the box after cleaning, and you can do it.

2. This position in the lower right corner of the washing machine, many people have not found this small door, we need to use a coin, press it, the small door will be easily opened, the next operation, we must first cut off the power, and then unscrew the round lid clockwise, you can see that there has been a lot of dirt accumulated here, generally two to three months must be cleaned once, otherwise it will affect the service life of the washing machine, then look at the rightmost tube, this tube is to eliminate the dirty water in the washing machine, and the rightmost one is used to open the door urgentlyIf the washing machine is in use, the power failure cannot open the door, you only need to pull it to open the door, so these are very important links, we must clean it regularly, and we can close the small door after cleaning.

In fact, the cleaning method of each washing machine is not exactly the same, so the best thing to do is to refer to the instructions. If the manual is not available, you can directly consult the after-sales ** to avoid misoperation.

The water inlet above the laundry detergent cartridge of the drum washing machine can be removed. As shown in Fig. Pull out the magazine, press the blue part in the middle down, and pull outward at the same time, and the whole magazine will come out. Wash it and put it in.

Both the first and third compartments can be filled with laundry detergent. The first is the main wash, and the third is the pre-wash detergent.

The specific functions of each grid are as follows:

1. According to the "1" or "i" mark in the small grid, this grid is used for pre-addition of washing solution. When selecting a program with a scheduled cleaning function, you can add cleaning fluid to this grid. When the cleaning procedure starts to feed water, the cleaning liquid will enter the drum along with the water.

2. According to the small grid marked with "", this grid is used to add softener. Do not add the washing liquid to this grid, as the softener added to this grid enters the drum with water during the cleaning process. If the washing liquid is mistakenly added to this box, a large amount of washing liquid residue will be left on the washed clothes.

The softener should not be added too much. There is a maximum dose in this compartment and cannot exceed the "max" mark.

3. According to the small grid marked "2" or "II", this grid is used to add laundry detergent. Before washing according to the marked program, the laundry detergent is added to this grid and the laundry detergent will enter the inner drum along with the water.

Summary. Hello dear. The method of cleaning the washing machine detergent sink is as follows:

1.First you need to prepare a small brush. It is not recommended to use a toothbrush because it does not reach dead ends.

How do I clean the detergent sink in my washing machine?

Hello dear. The method of cleaning the washing machine detergent sink is as follows:1First you need to prepare a small brush. It is not recommended to use a toothbrush because it does not reach dead ends.

It is recommended to use a small brush with a round tip. It's easier to clean. Then you also need to prepare clean water.

2.The laundry detergent tank can be removed, you first remove the laundry detergent tray box. The box and detergent sink can be scrubbed separately with a small brush.

3.Finally, you can clean them with clean water. If possible, you can add a little disinfectant to disinfect.

I hope I can help you, if you have any other questions about washing machine cleaning, you can consult me, I have always been there. <>

I just tried it, and the drum laundry detergent box has three slots, and the MAX blue sheet in the middle, press it down by hand, and then it is easy to pull out.

The whole box can be pulled out, there is a part pressed down, the whole can be pulled out, and then cleaned and then installed back, very simple.

Put some water, wash it with a slender tube, and remember, wash it with a special washing machine powder.

Summary. Use a small brush to gently brush the three slots, and then wash them with water. It is inevitable that a thick layer of stains will accumulate inside the laundry detergent tray, which will look particularly dirty.

If it is mainly a hard lump of laundry detergent, then we can pour some hot water into it, melt it, and rinse it with water a few more times, and the general drum washing machine, the drum washing machine, the trough where the washing powder is placed, is all the laundry detergent that has not been dissolved, and the detergent is scaled, how can I remove it.

Use a small brush to gently brush the three slots, and then wash them with water. It is inevitable that a thick layer of stains will accumulate in the empty laundry powder tank, which will look particularly dirty. If it is mainly a hard lump of laundry detergent, then we can pour some hot water into it, melt its base content, and wash it several times with clean water.

The laundry detergent sink in the washing machine needs to be cleaned regularly, and the hidden and hidden keys will clog and accumulate dust, affecting the washing effect. The steps to clean the laundry detergent sink are as follows:

1.Drain the water in the washing machine and remove the laundry detergent sink. The detergent sink can be removed from the top or front of the washing machine, please refer to the washing machine instructions for specific instructions.

2.Rinse with stove water: Put the laundry detergent sink in the sink or basin and rinse off the laundry detergent and dust attached to the surface with clean water.

If the inside of the powder tank is seriously blocked, you can also add water to soak it directly, and after soaking for 30 minutes, it can significantly soften the adherents and rinse it more conveniently.

3.Clean the rubber seal: The rubber ring on the laundry detergent sink also needs to be cleaned, otherwise it will leak when you put it back. The rubber ring can be removed and cleaned together with the powder tank. After cleaning, make sure that the rubber ring is intact and put back into the powder tank normally.

4.Put the powder tray back in: Reinstall the rinsed detergent tray and rubber ring back into the washing machine. Depending on the model, it can be inserted directly from above, or it needs to be fixed with screws, see the manual for specific methods.