There is a fire in the middle of the gas stove, and there is no fire in the outer ring

1. What is the reason why there is no fire around the gas stove only if there is a fire in the middle?

It may be because the position of the damper is not adjusted properly, it is recommended to adjust it in one direction first, continue if the situation improves, and adjust it in the opposite direction if the situation is worse; It may be that the air outlet of the outer ring is blocked, and the user can remove it and dredge it with a needle.

2. What are the skills for daily maintenance of gas stoves?

1. In the process of using the gas stove, it is necessary to use the foaming agent regularly.

Inspect the equipment to ensure that there are no gas leaks, especially the cooker and hose, and replace the equipment immediately to avoid accidents if it is found to be aging or cracked.

2. After using the gas stove, it must be cleaned immediately to avoid the formation of grease and scale, and the cleaning is more difficult. In addition to this, baking soda needs to be used regularly.

Clean the gas stove thoroughly, which will make the stove brighter and remove any oil that is missed on a daily basis.

3. During the use of the gas stove, the location of the fire hole is easy to be blocked by oil scale, and the situation is serious, which will lead to no fire, so the user must always check the use of the fire gas and dredge it with a fine needle or iron wire, it is recommended at least once a month.

This situation is mostly due to the fact that the damper is not adjusted well, and it can be solved by adjusting the damper at the bottom of the gas stove.

The damper of the gas stove is generally at the bottom of the stove.

When the gas stove is bursting from the fire, yellow flame, no fire in the outer ring, etc., you need to adjust the damper, whether it is a paddle type, or a knob type, as long as it is external, adjust it in one direction first, if the flame has also turned, please continue, if it is worse, adjust it in another direction, you don't have to remember the direction. If the gas stove appears: burst from the fire, yellow fire red fire, no fire in the outer ring, tempering, etc., you may wish to adjust the damper to try, do not remember to adjust the direction, first adjust it in one direction, if the situation has improved, please continue, until the ideal, if the situation is worse, try the reverse until the ideal, whether the damper is ideal, no yellow fire, no fire, strong firepower as the standard.

Here's why:1The gas outlet of the outer ring of the gas stove is blocked, you can test it with a lighter, if it can be hit, it means that the gas outlet is normal, it is a problem with the ignition, if it can't be hit, it is a problem with the gas outlet hole, and it should be dredged.

2.There is a problem with the gas stove itself, and the gas cannot be sustained**, so it cannot be hit.

There is a fire in the middle of the gas stove, and there is no fire in the outer ringIf you hit the smallest fire, that's the phenomenon, if you hit the big fire, it's still this phenomenon, that's which one, huh? The mouth is blocked, you find the maintenance master, take a look.

The air hole of the outer ring is blocked, you find something to pass the air hole of the outer ring, or the damper under the stove is small, if these two places are adjusted or there is no fire, it is the stove is broken.

If it is an old stove, there was a fire before and now it is not, it is dirty and blocked, take the upper ring away and clean it, it is best to use a vacuum cleaner to suck it. If it's new, there's a plug at the bottom to control the size of the airflow, and if you turn it up a little bit, the gas can be drawn through.

Close the damper and give it a try, if it still doesn't catch fire, you're done. It would be nice to use the brake line of the bicycle to unclog the air outlet.

After 1980, with the deepening of reform and opening up, the rise of the market economy, all kinds of foreign gas appliances have entered China, gas appliances production enterprises have increased from the original more than ten to nearly hundred, the type of enterprises has also developed from the original single gas company to state-owned, collective, private and other types of enterprises, foreign famous gas appliance manufacturers have also begun to look for partners in China, so that the quality and appearance of gas appliances have also fundamentally changed. The variety and functionality of products are also constantly changing.

During this time, the panels, combustion system, ignition device were also improved. The panel material is sprayed with cold plate, the burner has a cast iron stove head, surface electroplating or zinc spraying, and the ignition device adopts piezoelectric electronic ignition, which improves the ignition rate and improves the durability and reliability of the gas stove.

3) Breakthrough stage (1990 2006): more varieties and complete styles.

Since 1990, China's and the world's economy have entered a stage of rapid development. China's gas and gas appliance business has entered a period of rapid growth. The introduction of foreign advanced gas appliance development and manufacturing technology has brought about a breakthrough change in China's gas appliance industry.

The variety of household gas cookers has increased, the styles are novel, the safety measures have been enhanced, and the materials, functions and performance have been improved. It has also improved in terms of production quality and reliability, process level, degree of automation and intelligence, advanced performance indicators, energy saving and environmental protection, and safe use.

Ask a professional master to explain what is going on. There is gas and fire in the center, that is, there is no fire around, not even gas.

The excretory hole is blocked. To communicate.

1. It may be that the pores of the outer ring stove head cover are blocked (especially the inward air hole or ignition groove of the outer ring stove head cover), and the solution is: after it is completely cooled (otherwise it will be hot), remove the outer ring stove head cover, and dredge the air hole with a toothpick. 2. It may be that the slotted ventilation groove on the lid of the outer ring stove head is not aligned with the flame on the small stove head, and the solution is:

After cooling, turn the stove head cover, a complete flame on the small stove head should be aligned with the ignition groove on the large stove head cover in the outer ring, remember to cover it well, and then try to ignite it. 3. If you use a newly charged barrel of gas, it may be that the pressure is too small, the pressure in the barrel is too large, resulting in a small outlet pressure The solution: tighten the adjusting screw plug clockwise, there is no change in the end, and then remove the pressure reducing valve cover, there may be a plastic cover inside, you can use a larger flathead screwdriver, and screw it a few times clockwise, and the flame has changed. If the pressure is adjusted successfully, if it is in the end, there is no flame to become larger, it may be that the elasticity of the spring is insufficient, and a few 1-cent coins can be cushioned. If there is a phenomenon of detachment from the fire (indicating that the air pressure is too high), please step back a little counterclockwise.

The inner ring of the gas stove caught fire and the outer ring did not catch the reason:

1. The outer ring damper is too large, resulting in too fast airflow and no flame. Closing the damper is smaller, which can generally be solved;

2. You can test it with a lighter, if it can be hit, it means that the air outlet is normal, it is a problem with the ignition, if it can't be hit, it is a problem with the air outlet hole, and it should be dredged.

Summary. The third possible reason is that the pipeline gas supply of the gas stove is insufficient or the pressure of the pressure reducing valve is too small, if we check that the outer ring of the gas stove is not blocked, but there is no fire, if the fire in the inner ring of the gas stove is not sufficient, you can check whether the pipeline gas supply is insufficient or the pressure of the pressure reducing valve is too small, etc., resulting in the gas stove only the inner ring has fire, we only need to increase the valve pressure.

What happens when there is fire in the inner ring of the gas stove and no fire in the outer ring?

The first possible reason is that the small hole of the outer ring of the gas stove is blocked, when we find that the gas stove only has fire in the inner ring, but the outer ring does not, it is very likely that the small hole in the outer ring of the gas stove is blocked, if this situation occurs, we must quickly turn off the gas stove, dredge the outer ring of the gas stove, and then open the inner and outer rings will be on fire normally.

The second possible reason is that the gas in the gas stove is insufficient, when there is not much gas in the gas stove, the fire will become very weak, and it can only burn the fire in the inner ring, in this case, we only need to fill the gas, the gas is sufficient, and the gas stove will burn normally.

The third possible reason is that the pipeline gas supply of the gas stove is insufficient or the pressure of the pressure reducing valve is too small, if we check that the outer ring of the gas stove is not blocked, but there is no fire, if the fire in the inner ring of the gas stove is not sufficient, you can check whether the pipeline gas supply is insufficient or the pressure of the pressure reducing valve is too small, etc., resulting in the gas stove only the inner ring has fire, we only need to increase the valve pressure.

Thank you for your question.

Summary. <>

Hello, dear, very happy for your problem, what is going on with the fire under the outer ring of the gas stove, help you find out, possible reasons: 1. The stove is not smooth, the reason is that there is carbon slag, which leads to unobstructed, and the solution is to clean up. 2. If the gas switch is turned on too much, it will lead to insufficient combustion, and it can also lead to gas leakage, when the temperature reaches a certain level, the ignition will leak from the bottom, and the solution is to switch appropriately.

What's going on with the fire under the outer ring of the gas stove.

Hello, dear, very happy that you are blind to your problem, what is going on with the fire under the outer ring of the gas stove, help you find out, possible reasons: 1. The stove is not smooth, the reason is that there is carbon slag, which leads to unobstructed, and the solution is to clean up. 2. The gas switch is too empty, which will lead to insufficient combustion, and can also lead to gas leakage, when the temperature reaches a certain level, the ignition will leak from the bottom, and the solution is to switch appropriately.

3. If the pipeline is damaged, and the gas leaks from the damaged place, the fire leakage will be caused by the call, and the solution is to check whether the pipeline is intact and replace the good regret pipeline in time to achieve the safety purpose.