The best location size of the smart toilet power socket

The power socket of the smart toilet should be installed on the right side of the toilet, not directly behind it, 20cm 30cm from the center of the toilet drain and 30cm above the ground. In addition to paying attention to the location and size of the power socket during installation, the following points should be noted:

1. If the bathroom does not separate dry and wet, the power socket should be installed with a splash-proof box to avoid a short circuit of water in the shower.

2. The socket of the smart toilet should be a 10A three-hole waterproof socket, which is safer to use.

3. When installing the angle valve, it can not be tightened too tightly, and when it cannot be screwed by hand, it is better to lock it with a wrench to avoid cracking and leaking the water inlet in the wall due to being too tight.

4. Glue the front of the flange sealing ring on the drain at the bottom of the smart toilet, and then place it in the correct installation position, which is required to be horizontal and vertical.

Install it on the left side of the smart toilet 40 cm from the ground.

Because most people are accustomed to throwing paper towels with their right hand, the paper basket is also placed on the right side, and the power socket should be placed separately from the paper basket. There are no strict requirements for the height of the general socket, the conventional height is completely for the convenience of use and neat and beautiful considerations, there are usually three positions, the bathroom is easy to splash, you can use the waterproof socket.

Precautions for the installation of toilet sockets:

When the socket is installed, the surface-mounted socket should not be less than a meter from the ground. The concealed socket is not less than one meter from the ground, and in order to prevent children from being electrocuted, touched with fingers or poked into the eyelets of the power supply with metal objects, a safety socket with a safety flap must be selected. The construction wiring requirements of the single-phase two-eye socket are:

When the eyelets are arranged horizontally, it is "left zero and right fire", and when arranged vertically, it is "upper fire and lower zero".

The wiring requirements of the single-phase three-eye socket are: the grounding eyelet at the upper end must be firmly connected, solid, and connected with the grounding wire, and must not be unconnected. The remaining two eyelets are wired according to the rule of "left zero and right fire", and it is worth noting that the zero line and the protective grounding wire must not be misconnected or connected as one.

Refrigerators should use a separate, three-prong socket with a protective ground.

When assembling the switch, the concealed switch is required to be meters away from the ground and 150 mm-200 mm from the horizontal distance of the door frame. The position of the switch should correspond to the lamp position, and the switch height in the same room should be the same. Waterproof switches should be used in the bathroom to ensure personal safety.

The height of the smart toilet is about 70cm, the length is about 70cm, and the minimum is 62cm, but to put a toilet bowl, you must leave at least 80 times 128 space, and 80 is the comfortable size of the legs when the human body squats.

Scope of application: This standard specifies the matching dimensions of the cover plate and base of the smart toilet. This standard is applicable to intelligent toilets installed on water supply and drainage pipelines in civil or public building facilities with an ambient temperature of 0 40, a relative humidity of no more than 95%, and a static pressure of water supply not greater than that.

Drafting unit:

China Household Electrical Appliances Association, China Building Materials Inspection and Certification Group (Shaanxi), Guangdong Lehua Home Furnishing Co., Ltd., Zhejiang Xingxing Jie Bao, Zhejiang Yihe Sanitary Ware, Panasonic Household Appliances Research and Development (Hangzhou), Dongtao (China), Qingdao Weixi Intelligent Technology, Geberit (Shanghai) Investment Management.

Xiamen Jianlin Healthy Home Furnishing Co., Ltd., Shanghai Yahong Mould Co., Ltd., Huida Sanitary Ware Co., Ltd., Guangdong Huayi Sanitary Ware Industry, West Malaysia Intelligent Technology Co., Ltd., Shenzhen Bodian Electronic Technology Co., Ltd., Ningbo Shunjie Sanitary Appliances.

The size of the general toilet is 650*345*740, if your bathroom is not very large, you can also install a relatively small toilet, generally the size of this toilet is only 70 cm in length, and the water is about 40 cm before the wall size, the water is about centimeters, and the water is about 20 cm. The common toilet is 30-50 cm wide, 70 cm high, and 60-70 cm long.

Generally, the height of the toilet is about 70cm, the length is about 70cm, and the minimum is 62cm, but to put a toilet, at least 80*128 space should be left 80 for the human body to stretch the legs when squatting, and the comfortable size is the size. 128 is the minimum size to lean forward when squatting. The size of the flush toilet is generally divided into the length, width, and height of the toilet.

The length, width and height of the toilet are different according to the different models, so you must choose the right toilet size when purchasing.

The size of the toilet bowl is generally determined by its pit distance. The pit distance of the smart toilet is generally 300mm

400mm of these two, it is best to measure the pit distance and then buy a toilet.

Summary. The buttocks of the smart toilet are washed with a unique vortex rotating bubble nozzle, which has a massage effect and promotes blood circulation, and completely cleans the feeling. Avoid bacterial multiplication.

Originating in the United States, smart toilets are used for medical and geriatric care, and were originally equipped with a warm water washing function. Later, through South Korea, Japanese sanitary ware companies gradually introduced technology to start manufacturing, adding a variety of functions such as toilet lid heating, warm water washing, warm air drying, and sterilization. There are three kinds of smart toilets on the market, one is a smart toilet with cleaning, heating, sterilization, etc., one is a smart toilet that can be automatically changed, and the other is an intelligent toilet with automatic change and cleaning function.

Do you need a 16A socket for a smart toilet.

Hello, I am Life Answerer Pepsi Know-it-all K2, I have served 1127 people, I am happy to serve you, and the teacher is answering for you.

Dear, no, the smart virtual toilet does not need a 16A socket. The smart toilet plug is 10A, not 16A, because it does not belong to the high-consumption Swift Regret electrical appliances, and there is no need to make Chang slag use high-current plugs and sockets.

The power does not exceed 2kw, and the 10A socket should be able to meet the use.

The buttocks of the smart toilet are washed with a unique vortex rotating bubble nozzle, which has a massage effect and promotes blood circulation, and completely cleans the feeling. Avoid bacterial multiplication. The smart toilet originated in the United States and was used for medical treatment and elderly care, and was originally equipped with a warm water washing function.

Later, through South Korea, Japanese sanitary ware companies gradually introduced technology to start manufacturing, adding a variety of functions such as toilet lid heating, warm water washing, warm air drying, and sterilization. There are three kinds of smart toilets on the market, one is a smart toilet with cleaning, heating, sterilization, etc., one is an intelligent toilet that can automatically change the set, and the other is an intelligent toilet with automatic change and cleaning function.

Smart toilet socket installation size pro! Hello, I am happy to answer for you<> the installation dimensions of the smart toilet socket are as follows: 1. The reserved height of the toilet socket is generally about 30 cm for the finished surface of the floor tile, that is, 15 cm on the toilet water interface.

The point is that it should be 20 cm from the left or right side of the center point of the toilet drain nozzle, (whether it is the left or the right side should be subject to the water on the side of the toilet) This is a reserved size considered from the decoration effect, which has won the recognition of most decorators. 2. There are also decorators mainly from the electricity safety, Ma Xiang morning barrel electric socket reserved on the left or right side of the upper end of the toilet tank, with a floor tile finish surface height of 85 90 cm. 3. There is another reservation method, the height of the toilet reserved socket is still 30 cm, but it is not on the same side as the toilet water interface.

It is 20 cm away from the center point of the toilet drain nozzle, one on the left and one on the right. The distance between water and electricity has been widened, which does not affect the decoration effect, and the safety of electricity has been improved. Hope mine can help you <>

Do you have any other questions?

The smart toilet socket can be installed on the wall where the toilet is installed, 40cm above the ground and 30cm perpendicular to the ground.

Smart toilets are more installed on the left, because most people are used to using the right hand, and the wastebasket is also placed on the right. Generally, there are no strict requirements for the height of the socket. The regular height is entirely for the convenience of use and for neat and aesthetically pleasing.

There are usually three positions: up, middle, and down. Bathrooms are prone to splashing and waterproof sockets can be used.

When fixing the toilet, the floor must be made of glass glue. Control the size of the gap between the toilet and the wall, and place the toilet straight. After installation, it is also necessary to see whether the toilet flushes smoothly and whether the switch is normal.

Precautions for the use of smart toilets.

1. Do a good job of dry and wet partitioning in the bathroom

Smart toilets belong to electrical products, and it is best not to contact water with electrified products. Therefore, the bathroom where the smart toilet is installed should be divided into dry and wet areas. At the same time, maintain the power socket of the smart toilet to prevent water from splashing on it.

2. Do not need to turn off the power for a long time

If it is not used for a long time, the toilet must be turned off to make the toilet power-free after being damp, resulting in improper use of the circuit board and causing spontaneous combustion of the mountain.

<> "What is the height of the smart toilet socket.

1. What is the height of the smart toilet socket.

The smart toilet socket is 30-50 cm from the ground, and when it is set up, it needs to be considered according to the toilet structure. However, it should be noted that it should not be on the same side as the toilet water interface, 20 cm from the left or right side of the center point of the toilet sewage pipe, one on the left and one on the right side, and the distance between water and electricity can be increased to increase the safety performance of electricity.

2. Precautions for the location of the power seat of the smart toilet.

1. Sockets need to be reserved.

In the decoration process, if you consider installing a smart toilet in the future, you should design the circuit diagram in advance, and reserve a socket near the installation area, otherwise it will be difficult to transform it in the later stage.

2. The bathroom is divided into dry and wet areas.

Because smart toilets need electricity, when installing smart toilets, dry and wet separation needs to be done in advance. At the same time, protect the power socket of the smart toilet to prevent water from splashing into the power supply.

3. Installed by professionals.

When purchasing a smart toilet, it is not recommended that the merchant who wants to provide installation services should not install it by himself, so as not to cause problems in later use due to non-standardization. When the smart toilet fails, do not disassemble and assemble it by yourself, and repair it by a professional who has been defeated.

4. Do not turn off the power for a long time.

If you do not use the smart toilet for a long time, the power will be turned off in time, otherwise the toilet will be damp, which will lead to improper use of the circuit board, resulting in a greater danger of spontaneous combustion. It is always in a state of power-on, and there is a high probability of leakage. Therefore, it is necessary to be cautious when choosing.