Range hood and stove cleaning, ask for recommendations

Kitchen cleaning tips.

1. Gas stove.

After the temperature of the gas stove cools, put it in hot water, add soapy water, let it stand for 15 minutes, and then wipe it with a rag or steel wire, and remember to wipe it clean after washing.

2. Range hood.

Solution 1: Take a little flour, add water to make a sticky paste, dip the flour with a discarded toothbrush and clean it in small circles.

Solution 2: Use commonly used edible alkali at home, add warm water, leave for 15 minutes, and then rinse and dry.

3. Cabinets. Cabinet countertops and panels can only be cleaned with a damp rag on weekdays, because the cleaning materials are different due to different cabinet materials, but neutral detergents can be used in most cases. Hard-to-wipe stains should be cleaned with soapy water and mild detergent, or if they are matte countertops, use a detergent to gently wipe them in a circular motion.

If the cabinet is made of logs, the dust should be removed with a duster first, and then wiped with a dry cloth or a special lotion for log maintenance.

As for the stove on the countertop, you can remove the stove and stove that need to be cleaned and place it in the sink, brush off the heavy dirt, and then pour 40 50 hot water (the running water outlet should be sealed) into it, with the addition of 120 grams of kitchen oxygenated bleach and 2 tsp of kitchen grease cleaner, the stove can be soaked for about 20 minutes and then easily cleaned with a rag!

Finally, let's talk about the sink where the cabinet is particularly easy to stick to the oil, you can sprinkle a little fine salt on the oil stain, and then wipe it with waste plastic wrap and clean it with warm water; You can also soak the drain in warm soapy water for 30 minutes for better stain removal, and the faucet can be wiped with toothpaste.

The professional master found in the ash gang deeply cleaned the oil stains and dirt inside the gas stove, and cleaned the range hood very clean.

Household range hood and stove is a must-have for every housewife, after cooking every day, there will naturally be oil residue on the range hood and stove, if not cleaned for a long time, not only affect the health of the food source, but also affect the hygiene of the kitchen, more likely to cause disasters. Therefore, it becomes crucial to clean the hood and cooktop in a timely manner.

First of all, choose the corresponding cleaning method according to the material of the range hood and cooktop. Stainless steel range hoods and cooktops can use special stainless steel cleaning agents, first use a damp rag to clean the oil on the surface, then gently wipe with a cleaning agent, and finally wipe dry with a dry cloth.

Secondly, if the range hood and stove are made of ceramic, you can add a small amount of dish soap with clean water and gently scrub them with a brush. After washing, rinse with water, and then wipe dry with a dry cloth.

In addition to this, white vinegar can also be used for cleaning. Pour the white vinegar into a spray bottle, spray it on the hood and cooktop, and wipe it off with a sponge or paper towel. White vinegar can remove oil stains, and at the same time, it can also sterilize and disinfect.

Finally, some areas that are difficult to clean, such as the filter inside the hood and the black dirt on the cooktop, can be deeply cleaned with cleaning hail-sensitive accessories such as detergent and cleaning brushes. When using, you need to follow the instructions to ensure the cleaning effect and safety.

To sum up, instant cleaning of range hoods and cooktops can not only ensure good kitchen hygiene, but also extend the life of equipment, bringing convenience and health to people's lives.

1. Use warm water to adjust the detergent or washing powder, and first apply the aqueous solution to the surface of the object with a scouring pad (first clean the surface of utensils, cabinets, wall tiles and other surfaces with less oil stains in the kitchen; Finally near the stove, the surface of the hood).

2. Spray the special oil stain agent on the fan blade and let it stand for 3 minutes; Boil a pot of water until boiling, and align the water vapor with the extraction hood, then turn on the range hood, and use the separation of the ants to let the heart force be stuffy, so that the oil and dirt remaining on the fan blades flow into the oil collection cup; Turn off the switch, wipe with a clean rag, and clean the fan blades immediately, but be aware that residual oil and water will spill out.

3. Remove the fan blades, soak them in warm water with special detergent, and let them stand for about 10 minutes; Wipe with a rag and gently wipe off the oil; If there is still stubborn tar sticking, you can use a wire brush, spray some strong oil detergent to scrub it, and clean it with water.

4. If you find that the oil collection cup is 6 points full, you should start to remove it; Dispose of the accumulated waste oil; Soak the oil cup in warm water and detergent for 3 minutes, then wipe it off easily with a rag. After cleaning, you can add an appropriate amount of cleaning + water mixture to the oil cup, then the residual oil will be automatically separated when it flows down, and it can be poured out next time.

5. The remaining electrical switch parts and shell parts can be wiped off with a scouring pad with warm water and dish soap. There is no need for a wire brush to clean, which will scratch the surface of the smoke machine and rust will occur.

1. Apply the aqueous solution to the surface of the object with a scouring pad (first clean the surface of kitchen utensils, cabinets, wall tiles and other surfaces with less oil stains; Finally near the stove, range hood).

2. Cleaning of the fan blade of the range hood: spray the special detergent on the fan blade and let it stand for 3 minutes; Boil a pot of water until boiling, and align the water vapor with the extraction hood, then turn on the range hood, and use the principle of centrifugal force to make the oil residue on the fan blade flow into the oil collection cup; Turn off the switch, wipe it with a clean rag, and clean the fan blades immediately.

3. Cleaning of the filter screen of the range hood: remove the fan blades, soak them in warm water with special detergent, and let them stand for about 10 minutes; Wipe with a rag and gently wipe off the oil; If stubborn tar still adheres to it, you can use a toothbrush to dip a little strong oil cleaner and gently scrub it off with clean water.

4. Cleaning of the oil storage box of the range hood: if you find that the oil cup is 6 points full, you should start to remove it; Dispose of the accumulated waste oil; Soak the oil cup in warm water and detergent for 3 minutes, then wipe it off easily with a rag. Add a new disposable oil cartridge (sold in supermarkets) to the oil storage box, and discard the disposable oil cartridge when cleaning up next time, it will be more convenient to clean up.

5. Wipe off the remaining scouring pad with water solution: the gap between the lighter switch on the stove and the opening key of the range hood is small, and other places where fingers can't reach in, you can wipe it with a scouring pad on a bamboo pad.

Range hoods are an indispensable kitchen tool in every home. The frequency of use is very high. If it is not cleaned in time, a lot of dirt will accumulate for a long time, affecting the emission of the range hood, thereby affecting human health, and will also affect the service life of the range hood.

However, cleaning the lamp black machine is a headache for every housewife, because Qingsheng is very troublesome, and many housewives don't like to do this work. So, what are the tips for cleaning the rags of the light black machine? Most of us only know to clean up with dish soap, baking soda, and some detergent when cleaning a light black machine.

Not to mention, it can't be cleaned, and a lot of deep oil can't be cleaned. Brush a plate of these cleaners, brush a pot.

<> you know when you hear the name of the dispersant, which is specially used for cleaning and cleaning, like our home lamp black machine, you only need to spray a few times on the oil stain, and you can see the oil stain flowing down after a while, and you don't need someone to wipe it hard, as long as you wipe it with a rag, it is very convenient and practical. Gua sha is scraped directly on the tile close to the furnace wall, or scraped on the surface of the lamp black machine, and after drying, a transparent oil film will be formed, which can play a role in isolation and facilitate cleaning. Melt some soda with hot water, add an appropriate amount of laundry detergent or cool oil, and use such a solution to clean and apply heavy lamps or fireplaces.

This method is a method that most people are familiar with, and the effect is remarkable, especially when using it when cleaning the lamp black machine, the best effect.

Do a detailed explanation of the problem for a detailed interpretation of the problem, I hope it will help you, if you have any questions, you can leave me a message in the comment area, you can comment with me a lot, if there is something wrong, you can also interact with me more, if you like the author, you can also follow me, your like is the biggest help to me, thank you. That's all for sharing, if you like me, please follow me. If you guys have any ideas, you can let us know in the comments below.

You can use dish soap with baking soda and white vinegar to clean, and if the oil is heavy, wipe it several times. If you have money, you can call a door-to-door steam cleaning, which will be clean.

It can be cleaned with dish soap, or with a product designed to remove grease, or with a rag to wipe it off, so that the fumes can be cleaned.

You should use a special cleaning product, the ability to remove grease stains is good, wait for dilution and wipe directly with a rag, so that the cleaning is clean.