How to clean the nozzle of the mimeograph machine, how to clean the nozzle of the printer

Soak in a solvent such as gasoline and then use a brush.

Printer nozzle noisy cleaning method:

1. The ink head structure of the inkjet printer.

The common ink head structure of inkjet printers mainly includes two ways: inkjet head and ink cartridge all-in-one machine and detached type, the ink head structure of the all-in-one machine is after the ink tank is exhausted, the ink head and the ink cartridge should be replaced together, and the structure of pure acacia such as Minyou is relatively tightly combined, with high reliability, but the relative cost is higher; The ink head and ink cartridge of the separate structure are separated, and the ink cartridge can be replaced separately after the ink is exhausted, which can save costs to a certain extent.

Most printers commonly used on the market today (such as Epson, Cannon, etc.) use a dual ink head structure: one black (or photo) ink head and one color ink head. In the ink tank, most of the black ink is independent, the other three-color ink tanks are integrated, and there are also some products that each color ink tank is independent and can be replaced separately, which further reduces the printing cost.

Second, the formation of inkjet printer "plug".

Due to the poor sealing or long-term storage of the print head after normal printing, the water evaporates excessively, resulting in the ink particles drying up at the tip of the fine print head, so that the ink cannot be sprayed normally; Or different inks are mixed with each other to produce chemical reactions, which are usually manifested as broken lines, missing colors, blurred handwriting and even failure to print normally.

3. Classification of inkjet printer "plugs": it can be roughly divided into two categories: soft plugs and hard plugs.

1) Repair of soft plugs.

1. Soft plug blockage refers to the disconnection fault caused by the increase of ink viscosity on the nozzle due to various reasons. Sometimes it is only attached to the surface of the nozzle of the ink outlet, and it can generally be restored by dipping the original ink and cleaning it many times. Its advantages are that the operation is simple and fast, without any physical damage; The disadvantage is that it is more expensive to use and more wasteful ink.

2. Use the print head cleaning function in the application tool of the printer driver to clean. Its advantages are that the operation is simple and fast; The disadvantage is that the cleaning effect is not ideal.

2) Repair of rigid plugs.

Hard plug refers to the plug caused by chemical solidification or impurities in the nozzle, and the troubleshooting method is more difficult, so the following four methods can be used to solve it.

1. Immersion method.

2. Pressure cleaning method.

3. Distilled water cleaning method.

4. Ultrasonic instrument cleaning method.

The operation method for cleaning the printer is as follows:Device: Honor MagicBook

System: Windows 10

Device: Canon All-in-One Printer TS3180

Slide the program: device and printer functions.

1. Click [Start] on the computer, as shown in the following figure:

2. Click [Equipment and Printers], as shown in the following figure:

3. Click the selected [Printer] to be cleaned, as shown in the following diagram

4. Right-click and click [Printing Preferences], as shown in the following figure

5. After opening the Printing Preferences dialog box, click Maintenance. Click Maintain Collapse and Custom Format, as shown in the following figure

6. Click [Deep Cleaning], as shown in the following figure:

7. Select [All Colors] and click [Execute] to clean the printer printhead, as shown in the following figure