Enter the game pure screen multiple colors crash

Updated on home 2024-06-14
15 answers
  1. Anonymous users2024-02-11

    Update the graphics card driver to try.

  2. Anonymous users2024-02-10

    Today's computers are close to the level of full popularity, which provides great convenience for people to work and study. However, the "crash" of the computer has become an unsolvable and inextricable annoyance for ordinary computer users. So, what can you do to avoid the annoyance of your computer "freezing"?

    1.Guarantee the correct BIOS settings. The settings in the BIOS must be appropriate, the wrong BIOS settings will cause you to freeze when running Windows.

    2.Always check the contact of computer accessories. Running in the case of poor board contact will cause the system to crash, so when replacing computer accessories, be sure to make the board and motherboard.

    Full contact. 3.Clean the chassis regularly. Too much dust will cause poor contact between the boards and cards, causing the system to crash during operation, so the chassis should be cleaned at all times and not let too much dust accumulate in the chassis.

    4.Persist in carefully checking and killing viruses. For optical discs or floppy disks of unknown origin.

    Don't use it lightly, and use antivirus software for attachments in emails first.

    Check it and open it again.

    5.Shut down in the correct order of operation. Do not turn off the power before the application software finishes running normally, otherwise it will cause system file damage or loss, and cause a crash during startup or operation.

    6.Avoid multitasking at the same time. Do not run other software during defragmentation or checking your hard drive with anti-virus software, as this will cause a crash.

    7.Don't overdo it. Drivers for various hardware don't have to be updated all the time, because the drivers are developed.

    Often there are bugs in it, which will cause damage to the system and cause the system to crash, and the latest is not necessarily the best.

    8.When uninstalling the software, use the built-in anti-installer or the installation and uninstallation method in Windows, and do not delete the program files directly.

    Because some files may be shared by other programs, once these shared files are deleted, the application software will be unusable and crash.

    9.When setting up a hardware device, it is best to check for Reserved Interrupt (IRQ) and do not let other devices use the interrupt number, so as not to cause interrupt conflicts and cause system crashes.

    10.When surfing the Internet, do not open too many browser windows, otherwise it will lead to insufficient system resources and cause system crash.

    11.If your machine does not have a lot of memory, do not run a program that takes up a lot of memory, such as Photoshop, otherwise it will easily crash when running.

    12.For system files or important files, it is best to use hidden attributes so that these files are not deleted due to wrong operation and cause system panic.

    13.Modify the master boot record of the hard disk.

    , it is best to save the original record first to prevent the original boot record from being restored due to a failed modification.

    Graphics cards and other accessories generally do not overclock, if you really need to overclock, pay attention to the temperature of the board after overclocking, CPU, graphics card, etc. work for a long time at abnormal frequencies and temperatures, it will automatically restart or crash, and the CPU, graphics card, and motherboard will be burned in the heavy.

  3. Anonymous users2024-02-09

    This may not be a simple setting problem, it is likely that the computer's CPU heat dissipation or the memory is not plugged in properly, resulting in the computer after a period of use, its temperature reaches the alarm mechanism.

  4. Anonymous users2024-02-08

    The computer inexplicably crashes and the display becomes a solid color processing method.

    1.Press"Win+E" Open Windows Explorer and click "Tools-> Folder Options". If the toolbar is not visible, press on the keyboard"alt"You can adjust it.

    Go out. 2.Switch to the "View" tab and check "Open folder window in a separate process".

    3.After setting it in this way, the next time you open the folder, it will not open layer by layer in this window, but will pop up another window. And we'll see that in the Task Manager.

    Two""process, even if one folder window is stuck, does not affect the operation of other file windows.

    Change the folder properties, cancel the index, and improve the response rate.

    In Win7, when a large file is opened in Explorer, the system scans the file first, performing a loop to check all parts of the file for establishment.

    Index. If the file is large and there is no index information, the system queries the query for the fileIt takes longer and the CPU usage is higher. Of course, the file is previewed, retracted.

    Sketches, etc., can also cause slow responses. Can be temporarily turned off for faster reactions.

    1.Right-click on the destination folder drive and select 'Properties.'"

    2.For folders, click the Advanced button on the General tab, and in Advanced Properties, uncheck it"In addition to file attributes, indexing is also allowed.

    The contents of this folder in Chinese".

    3.For drives, in the General tab, uncheck the box that says "Allow the contents of this drive file in addition to file attributes".

  5. Anonymous users2024-02-07

    Go to BIOS to see the temperature of the CPU, it should be too hot.

    Check the memory, and then it's the cause of the virus.

  6. Anonymous users2024-02-06

    In this case, the main thing is to check the temperature of the CPU to see if the CPU cooling fan does not rotate? Causes CPU high temperatures.

  7. Anonymous users2024-02-05

    Or maybe there's a problem with the computer configuration!

  8. Anonymous users2024-02-04

    Possible causes:

    1. There are too many programs to start, which exhausts system resources, so that the data required by individual programs cannot be found in memory or virtual memory, and abnormal errors will occur.

    2. CPU overload: Overclocking increases the working frequency of the CPU, and at the same time, it may also make its performance unstable. Overclocking makes this contradiction even more prominent, exacerbating the fact that the CPU can access data in memory faster than the memory and hard disk can exchange data, exacerbating the situation where the required data cannot be found in memory or virtual memory, which can lead to "abnormal errors".

    3. If the remaining space of the hard disk is too small or too fragmented, because some applications require a large amount of memory to run, virtual memory is required, and virtual memory is provided by the hard disk, so the hard disk must have enough remaining space to meet the needs of virtual memory. At the same time, users should also develop a good habit of regularly organizing their hard disks and removing junk files from their hard drives.

    4. The heat dissipation effect is not good, and the display, power supply and CPU generate a lot of heat during work, so it is very important to maintain good ventilation.

    5. Hardware problems, graphics card, and aging of power supply may cause crashes.

    If it is a problem with the hardware, it is recommended to take it to a professional repair shop for repair.

  9. Anonymous users2024-02-03

    You can see if your computer case is too much ash and clean it up. If not, it's a hard drive problem.

  10. Anonymous users2024-02-02

    It was a computer crash, and the reason for this is unknown.

  11. Anonymous users2024-02-01

    Computer freezes are generally a memory problem

    1.Computer applications take up too much memory space, resulting in insufficient memory capacity and crashes;

    2.Crashes due to incorrect application memory space allocation;

    3.Poor memory quality, the data written to memory by the application cannot be read, resulting in a crash;

    4.Multiple applications collide when the memory address allocation is muffled, resulting in a crash;

    5.The system is infected with viruses, and a large number of viruses are replicated in memory, resulting in insufficient available memory of the application, resulting in application memory allocation conflicts and resulting in crashes.

    6.Although many crashes eventually come down to memory, it doesn't mean that a computer crash is memory corruption, or it may be a virus that causes system chaos and memory conflicts.

    How to fix the computer freeze:

    1.Start Task Manager: Press [Ctrl+Alt+del] to quickly launch Task Manager.

    Note: When the computer is unresponsive, you can often press the Ctrl+Alt+del key combination to start the task manager), in the "Application" bar under the task manager window, select the task you want to end (select the task to make the computer crash), and then click "End Task" to be stupid;

    2.After booting up, use Guard and antivirus, and comprehensively examine the computer;

    4.If the above methods do not work, press the power button of the computer to force the shutdown and back up the data, format the whole disk and reinstall the system.

  12. Anonymous users2024-01-31

    The computer screen is not good, and it may also be a problem with the computer configuration.

  13. Anonymous users2024-01-30

    Causes of "Crash":

    1 "Crash" caused by improper BIOS settings Each hardware has its own default or specific working environment, and it cannot be set beyond its working permissions, otherwise it will crash because the hardware does not meet this requirement.

    2 "Crash" caused by hardware or software conflict The "crash" of computer hardware conflict is mainly caused by the conflict of interrupt settings, when a hardware conflict occurs, although each hardware can barely coexist in the system, but can not work at the same time, such as being able to access the Internet when you can not listen to ** and so on.

    3 The "crash" caused by the quality and failure of the hardware At present, some small brands of computer hardware products are often put on the market without passing the inspection procedure, among them, there are many hardware products that are not up to par in the shroud of good quality computer hardware is very hidden, and it is not easy for ordinary people to see. As far as these hardware products are concerned, the reason why computers often "crash" is very directly related to them.

    4 "Crash" caused by the exhaustion of computer system sources When the computer system executes the wrong program or **, it will form a "dead" cycle inside the system, and the originally very limited system resources will be invested in endless repetitive operations, and when the operation is finally exhausted because the computer is too large to exhaust the resources and cause "crash".

    5 "Crash" caused by the destruction of system files System files mainly refer to the files that play a key role in the startup or operation of the computer system, if they are missing, the entire computer system will not be able to run normally, of course, "crash" is inevitable.

    6 "Crash" caused by poor heat dissipation inside the computer Because the main component of the electronic components inside the computer is silicon (this is an element that is greatly affected by temperature in the working state).

    7 "Crash" caused by the wrong operation of the primary user For the beginner user, some wrong operation in the process of using the computer will also cause the "crash" of the system.

    "Crashes" caused by other aspects In addition to the reasons described above by the author, there are many strange reasons that can lead to the "crash" of the system. For example, the voltage fluctuation is too large, the ability of the optical drive to read the disk is reduced, the quality of the floppy disk is poor, and the damage of viruses or hacking programs is caused.

  14. Anonymous users2024-01-29

    Your graphics card is not good, the machine should be equipped with a better point, it is recommended to clean up the cache.

  15. Anonymous users2024-01-28

    Graphics card Program Game itself System instability VGA interface is loose?

Related questions
8 answers2024-06-14

Multi-screen interaction refers to: based on DLNA protocol or flash connection protocol, Miracast protocol, etc., through WIFI network connection, on different multi-terminal terminals, such as common based on iOS, Android, Symbian and other operating systems on different smart terminal devices such as mobile phones, pads, TV, etc., can carry out a series of operations such as multi-content transmission, analysis, display, control, etc., The display content can be shared on different platform devices at the same time, enriching the user's multi-life life. >>>More

14 answers2024-06-14

Exit the game first. Then put the input method by pressing the caps lock key on the keyboard. >>>More

9 answers2024-06-14

War chess recommends you to play Fallout 2, Predator League 2 Wildfire, Silent Storm These three graphics are a bit ugly, but they are all quite in-depth and valuable for research. >>>More

23 answers2024-06-14

I am studying Chinese medicine, but my health is not very good, the teacher said that my tongue coating is a typical yang deficiency, very white, the main symptoms are a bit similar to yours, I mainly have diarrhea, I don't sleep well, although I am a doctor, but I don't pay attention, because I am young :) >>>More

12 answers2024-06-14

Try changing your monitor's refresh rate!

An empty space on the desktop"Non-icon location"Right-click - Properties - Settings - Advanced - Monitor - Screen Refresh Rate - Try to modify it between 60-85. After the change, enter the CF and change the resolution in the display options to be consistent with the desktop. If your monitor is flat, you can change it to 85, if it is LCD, it can be changed to 70 >>>More