What are the correct steps to use an electric kettle? Is it suitable for the elderly?

How do you use an electric kettle for the first time? Pour out the water you bought for the first time and boil it for drinking. Since the product is done by multiple people when it leaves the factory, although it looks clean, it is also made with industrial alcohol.

Wipe clean; Therefore, the first time to boil water is to clean the adhesions on the surface, and the high temperature can play a role in sterilization, which is a habitual practice. When you boil it for the first time, remember not to throw the water away every time, it's a waste! Here's how:

You can use a plastic kettle to take half a pot of tap water, add 2 tablespoons of salt, and shake constantly (up, down, left and right), repeat several times. Infuse a little warm water with warm salt water or vinegar and shake well to heat the inner tank evenly. Pour out the empty water bottle and pour in the boiling water.

Shake the bottle with less hot water to allow the bottle to get used to it, and then pour in the hot water. Try not to use the first pot of water as it will smell like a new bottle.

The use of the electric kettle is as follows:

1.Connect the water first, then the power supply. Some people use an electric kettle to connect to water without unplugging it and leaving the kettle directly off the base. This will make the hot base very easy to burn off, so the correct way is to connect the water first. Then turn on the power and turn on the switch.

2.Don't fill the water too much, as the capacity of the electric kettle is not very large. To save trouble, many people will fill their kettles.

In fact, this is absolutely wrong. In the process of boiling water, the water inside is very easy to overflow, which may flow into the base, causing leakage accidents. Therefore, when adding water, be sure to add the right amount, and the inner wall of each electric kettle is marked with the highest water level.

3.Turn on the switch first, then plug it in. Some people will turn on the switch before boiling water and then plug it in.

This is very wrong. The consequence of this is a sudden rush of a strong electric current to the electric kettle. After a long period of use, it will accelerate the aging of the electric kettle parts, greatly reduce the service life of the electric kettle, and in serious cases, it will cause leakage or even **.

Here's a tip on how to quickly remove limescale from an electric kettle, prepare potato skins, wash them and put them in. Then pour in an appropriate amount of white vinegar, do not peel the potatoes, and finally pour in water, cover the lid, shake evenly, then plug in the power, turn on the switch, and boil the water. Now that the water is boiling, we pour out the potato skins inside and wash them with clean water.

Let's see, the limescale in the kettle has completely disappeared.

The correct steps for the use of the electric kettle, first open the kettle, access the cold water, to the appropriate location, do not connect too much, put it on the electric heating plate, plug in the electricity, and then turn on the heating switch, the water will automatically cut off the power after it is boiled, very simple, more suitable for the elderly to use.

The steps of using the electric kettle are to connect the water to the kettle first, then connect the kettle to the socket, then put the kettle on the socket, and turn on the switch directly. The kettle is very suitable for the elderly.

The use of the electric kettle is relatively simple, first fill the electric kettle with water, and then directly plug the plug into the socket, there will be a small button next to it, click the button on it, the water will automatically open, it is very suitable for the elderly, and it is particularly safe.

1. First of all, take drinking water, clean and clean, and use real distilled water.

2. Turn on the switch of the kettle, that is, the switch to fill water.

3. Pour the distilled water into the boiling kettle, be careful not to be too full at this time.

4. Next, you need to start boiling the water and close the lid of the kettle.

5. Put the electric kettle on the base of the electric kettle.

6. Press the switch to boil water, and the indicator light will turn red.

7. When the boiling water is boiled, the indicator light will jump back and become colorless.

1. The rated power of the electric kettle is generally larger, the capacity of the power plug, socket and power cord should be selected appropriately, and the 10A specification should be selected generally, if the rated power exceeds 2200W, a larger size socket should be used, and these sockets should be used independently to ensure safety.

2. The plug of the electric kettle is usually equipped with a grounding electrode, which should be connected to the socket with a grounding socket. When in use, the power plug should be fully inserted into the outlet.

3. Always keep the power plug, socket, power cord and automatic switch device of the electric kettle dry and clean.

4. The water injection should not exceed the highest water line, so as not to overflow the pot when the liquid boils. The water injection should not be too little, otherwise it will be burned dry quickly, especially the whistle type electric kettle, at least the water should be immersed in the heating pipe more than 20mm, otherwise the electric heating pipe is easy to expose the water surface and burn out. In addition, it should be noted that do not connect the power supply before filling it with water, otherwise it is easy to burn out the heater or cause dangerous accidents.

5. When using the electric kettle, someone should take care of it and avoid dry boiling. If no one takes care of the water, after the water is boiled, the whistle kettle of the infinity thermostat will always boil the water dry, and the electric kettle equipped with an automatic reset thermostat will also boil the water dry due to repeated heating, and if the over-temperature protection function fails at this time, it will lead to a fire accident.

6. When using the electric kettle, be careful not to let children touch the kettle or touch the power cord to avoid accidents such as burns.

7. The electric kettle that is still connected to the power supply after boiling is easy to cause danger when flushing water or making drinks. In order to avoid scalding with boiling water, unplug the plug first, cut off the power supply and then take boiling water to ensure safety.

8. When cleaning, the automatic electric kettle should not be immersed in water or rinsed with water, so as not to damage the electrical insulation due to moisture, causing failure and leakage.

9. The electric kettle has been used for a long time, and there is scale on the surface of the electric heating pipe. Scale not only affects the thermal efficiency, but also causes the heat in the tube to increase dramatically and damage the electric heating pipe. Therefore, it should be checked regularly and cleaned according to the instructions.

10. Do not repair the electric kettle by yourself. During use, if the appliance is damaged and cannot work normally, do not disassemble the shell for repair, and send it to the repair shop or the manufacturer of the product for repair.

Precautions

When using an electric kettle, someone should take care of it and avoid dry boiling. If the water is unattended, the whistle kettle of the infinity thermostat will keep boiling the water after boiling, and the electric kettle equipped with an automatic reset thermostat will also boil the water dry due to repeated heating, and if the over-temperature protection function fails at this time, it will lead to a fire accident. Here I share a very good product for you, you can refer to it.

1. Order: No matter when, adding water first and then powering on is the first principle that must be observed when using an electric kettle, otherwise the heater is very easy to cause damage to the electric kettle, and in serious cases, it will cause a fire!

2. Water level: When using an electric kettle to make water, we must pay attention to the selection of water level, usually need to keep the water level 3 to 5 mm higher than the heater, which is the most important link to ensure the service life of the heater, and must not be ignored.

3. Water quality: In areas with hard water quality, it is recommended that you use softened water for heating. If you have a water purifier at home, it is best to use purified water, which can not only prolong the service life of the electric kettle, but also benefit the health of your family.

4. Dedicated: Keep in mind that the electric hot water Huihuai pot is only for water, and it is never allowed to use the electric kettle to make porridge, soup and boil other things containing acid, alkali, salt, sugar and other ingredients. There was only one result – the heater and kettle were corroded, and the life of the electric kettle was greatly reduced.

5. Sealing: For the electric kettle of the front shed, the sealing and leak-proof performance are very important. After using it for a period of time, the high-temperature resistant sealing rubber ring should be replaced in time according to the instructions in the manual, otherwise it will easily cause short circuit and ridge failure once leakage.

1. The water injected into the kettle should not exceed the highest water line. It should not be too little for shed transportation, because overflow or empty boiling is easy to cause kettle failure.

2. Fill the water into the pot and connect the power cord with the pot body first. Then plug the other end into an electrical outlet to heat up. For electric kettles with switches or automatic ones, unplug the switches to turn on the kettle.

3. The electric kettle is a high-power electrical appliance to read the manual carefully before use. And choose a proper power socket, and the socket needs to be used independently, and should not be used together with other high-power electrical appliances.

4. The power plug should be kept dry and clean. Do not pour water on it, and do not place it close to the fire source to avoid electricity leakage or burning.

5. Do not unplug the electric kettle after it is powered on. Wait for automatic tripping, and after the heating is completed, then cut off the power to take water for drinking to ensure safety.

6. Don't boil the electric kettle if there is no water. It is best to have someone take care of the bottle when using it, but the person who takes care of it must not be a child, so as not to burn the bottle by the child.

7. It is normal for the body of the electric kettle to become hot during use. Do not move the body of the kettle at will, so as not to have poor contact between the base and the kettle, which will cause the water to be unable to heat and cause malfunction.

8. The power cord attached with the electric kettle cannot be used for other purposes. It should be used as prescribed. When using the electric kettle for the first time, it should be filled with water to a high water level, and poured out after boiling.

If it is made of plastic, can the hot water be boiled with confidence?

--There should be no problem in normal life use (provided that your kettle material is made of materials that meet the standards).

If the hot water is boiling, unplug it immediately, will it damage the kettle in the long run?

--Generally, the electric kettle will automatically trip after the water is boiled. I don't know when you mean when you say when you turn on the water and unplug it immediately? It is when the kettle has not tripped, the wine is unplugged, which has an impact on the kettle, but it will not cause major damage to the kettle.

On the contrary, the water does not boil long enough and is not hygienic enough.

If you put it in the kettle, will it affect the performance of the kettle?

--What will be the impact of this? Don't understand.

Generally, the shell is made of plastic, which has little effect on the hot water inside.

Boiling hot water, unplug the power immediately, of course, it will damage the kettle for a long time, you must turn off the switch, and then unplug the power plug, you can also ensure safety.

It will affect the performance of the kettle, and the boiling water that has been put for a long time will also produce some nitrite substances that are not suitable for drinking, which is extremely bad.

It's the first time I've seen someone with such a warm maintenance kettle, starting from small things, commendable!

The most important thing is electricity safety, hehe.

There is no problem with the normal use of plastic kettles, and you can use them with confidence. However, it is better to use a stainless steel case.

Teacher Meng Qing answers the methods of children's ADHD and the common sense of ADHD.