Why does the kettle only go to 85 degrees?

Why does the kettle only go to 85 degrees? The main reason for this is that the original of the thermostat is faulty and should be repaired.

Let's take a look at the normal kettle and temperature, and the most correct use in some of the quick introductions.

Usually the water is 100 when it is boiled, and it is not good to think high. Whether it is 100 degrees or not depends on the internal temperature controller. General thermostats.

The working temperature is 105, deducting the conduction loss and error, basically the water will be boiled for 100 degrees, and the power will automatically stop heating.

1. How to boil water with an electric kettle?

1.Fill the kettle with water, connect the power cord with the jug body, and plug the other end into an electrical outlet.

Heating. For electric kettles with switches or automatic ones, the switch should be unplugged to make the kettle plugged in. Be careful not to turn on the power before filling it with water, otherwise it will burn out and generate heat.

or cause dangerous accidents.

2.The water should not be filled above the highest water mark to avoid spilling the kettle when the liquid boils. When using an ordinary electric kettle, the water should not be filled too little, otherwise it will dry quickly. If the electric heating pipe is exposed to the water, it can easily burn out.

3.The power rating of the electric kettle.

Generally larger. The capacity of power plugs, sockets, and power cords should be appropriately selected, should be above 10-15 amps, and should be used independently to ensure safety.

4.Always keep the power plug, socket, power cord and automatic switch device of the electric kettle dry and clean, and do not rinse with water, so as not to damage the electrical insulation due to moisture, causing malfunction and leakage.

5.Flushing or flushing with a freshly boiling electric kettle can easily cause injury. Unplug first, cut off the power, and then take boiling water to ensure safety.

2. How to drink water to be healthy?

1.The water should be completely boiling.

When boiling water, I saw that the water surface was about to boil, and thought that the water was boiling, but at this time, the water was more toxic and had not been completely boiled, so it should be boiled for a while before drinking.

2.The boiling time should not exceed 15 minutes.

In order to kill germs and viruses in the water as much as possible, the hardness and nitrite in the drinking water are reduced.

content, the boiling time of hot water should be controlled within 5-10 minutes. If the boiling time is more than 15 minutes, or if it boils repeatedly like a water heater in a public place.

3. Let the tap water boil for a while.

If you boil water with tap water, it should be noted that after the tap water is chlorinated, the combination of chlorine and organic matter in the water will produce halogenated hydrocarbons.

Chloroform and other harmful substances. When boiling water, take out the tap water and leave it for a while before boiling, which can accelerate the volatilization of harmful substances.

This is a setting for different models, different brands of kettles, some kettles are only set to 85 degrees or 90 degrees, generally speaking, there are very few kettles that can be heated to 100 degrees, even if the water dispenser is generally speaking, heated to about 90 degrees.

The kettle is set at 90, and when it drops to 85, it will be reheated to 100 to stop, it is possible that the kettle you buy is a thermostatic kettle, you set the specific temperature, and when the temperature drops below the temperature you set, it will be automatically heated, and because the temperature is set too close, a little heating will pass the temperature you set, and the general kettle is also the temperature when it reaches a moment will automatically cut off the power and stop heating. If you have to set it, take a good look at the instructions in the manual and follow the operation, if you don't want to keep the temperature constant, you don't need to set it.

The temperature sensing of the temperature control switch is not accurate.

If it is a new kettle, it means that there is a problem with the quality or design.

If it's an old kettle, it's time to repair or replace it.

The phenomenon that the boiling water of the ordinary electric kettle can only be boiled to 85 degrees is caused by the steam switch, and the performance of the metal thermostat in the switch changes the parameters to become larger, resulting in inaccurate temperature sensing and tripping before the water temperature meets the requirements;

The protection switch of the upper coupler is damaged, resulting in the failure of temperature sensing; The phenomenon that the high-end electric kettle trips when the water does not boil and reaches 85 degrees is because the water temperature sensor is abrupt, and the error of its temperature sensing becomes larger. Or the thermostat itself is damaged.

The corresponding solution to the above problems: if the steam switch is damaged, the internal metal temperature sensor can be replaced, or the upper coupler of the steam switch can be directly replaced, and the upper coupler needs to be directly replaced to ensure that it is heated normally and does not jump off before the water is boiled.

If the abrupt temperature sensor fails or is damaged, the original sensor should be replaced in time.

If it's 85 degrees, it's not open, and if it's 85 degrees, it's not open, and you have to burn to 100 degrees.

The temperature of the kettle is generally designed to be less than 100 degrees Celsius, and it is normal to reach only 85 degrees.

If it is an electric kettle and the boiling water is only 85 degrees, it is possible that the resistance wire of the electric kettle may burn out a section and cannot reach this temperature.

It may be that the model of the thermostat is not selected correctly, so when the water temperature reaches 85°, the power will be turned off.

Maybe the kettle is broken, and if the sleep is already boiling, it is likely that the local air pressure is insufficient.

I guess the kettle is broken.

It is water that cools to 45 degrees after boiling. The working principle of the electric kettle is that the water vapor generated when the water boils deforms the bimetal sheet of the steam temperature sensing element, and this deformation pushes the power switch to power off through the lever principle. It is not self-resetting when it is powered off, so the kettle will not automatically reheat after the power is off.

Origin:

Electric kettles were born in Chicago in 1891. With the development of science and technology, fast, safe, convenient, and full use of energy have increasingly become the main characteristics of the kettle, and the British people who love tea have fallen in love with it since then. In the 21st century, it has become a bestseller in the world.

The electric kettle adopts steam intelligent induction temperature control, which has the functions of automatic power-off after water boiling and anti-dry-boiling power-off.

With the needs of life, the current electric kettle is also developing in the direction of multi-function, such as leak-proof, anti-scalding, water locking, etc. The electric kettle has the advantages of fast heating speed, good heat preservation effect, strong filtration function and many styles.

At normal air pressure, the temperature of boiling water is 100 degrees. The smart kettle will also boil the water. Then keep warm to 45 degrees. Because the water is warm at 45 degrees, it is just right for people to drink it lukewarm!

The thermostatic kettle is a product that can help parents provide the right water temperature when brewing milk powder, for example, about 40 water is needed to brew milk powder, it can provide water at an accurate temperature. But tap water needs to be boiled before drinking is safer, generally the water is boiled and then slowly cooled to 40, parents do not know whether the water in the thermostatic kettle is boiled to 100? Let's take a look.

The water in the thermostatic kettle can be boiled to 100, whether it is with tap water or pure water to brew milk powder for the baby, the water in the thermostatic kettle should be boiled to 100 first, only after boiling water can the various impurities and microorganisms in it be removed, and the water will be safer, do not worry about the baby drinking the unboiled water diarrhea.

After boiling the water, adjust the temperature in the thermostatic kettle to 40, and it will remain at a constant temperature of 40. When it reaches 40, the water in it will come out to make milk powder for the baby. Boil a pot of constant temperature kettle water, which can facilitate the baby to brew milk powder many times, and does not need to re-boil water every time it is used, helping parents save a lot of things.

In addition, in addition to boiling the water in the thermostatic kettle to 100, the water temperature of 100 miles can be freely controlled, whether it needs 50 or 75 water can be provided, which can meet the daily accurate temperature of water.

There is no boiling.

A kettle is a container for water. There are many kinds of materials, which can refer to the metal kettle for boiling water, or the drinking water kettle that is easy to carry, which is mainly divided into five categories: 1. Plastic (main material) 2, stainless steel 3, aluminum alloy 4, ceramic 5, other materials, which can be heated by electricity or directly by fire.

According to the use: electric kettle: boiling hot water, instant heat, mostly used for tea; Kettle for water:

It is also divided into insulated and uninsulated; Thermal insulation kettle: double-layer stainless steel vacuum thermos kettle, there are also double-glazed thermos kettles, which are mostly used for hotels, clubs, conference rooms, and household hot water needs. The kettle is available in a variety of materials, such as stainless steel, plastic, glass, resin, etc., as well as special materials such as birch bark exterior and high-tech plastic liners.

The development of the kettle industry depends on the type of kettle, such as electric kettle can become an independent industry, plastic kettle industry can be an industry, the leading industry is both from the market demand or the development trend. In addition, there are wooden kettles and some ethnic kettles, due to the demand and application occasions are relatively narrow and the pure handicraft can not be guaranteed, so it can not become the mainstream in the future due to such restrictions.

The electric kettle is limited by safety issues and the awareness and quality of electricity, of course, this can be solved by technology, especially the need to pay attention to the use of methods and occasions. The plastic kettle is the most likely to become the mainstream of the future kettle, not only widely used, but also safe, lightweight, reliable and many other advantages, in addition, from the environmental protection aspect, if the kettle manufacturers can use some high standards of sanitary materials as raw materials, then it will be more environmentally friendly than the electric kettle.

Whether it reaches 100 degrees depends on the environment in which the electric kettle is used. It cannot reach 100 degrees at high altitudes, and can only be approached in areas close to sea level. The temperature of boiling water is not that strict, and the purpose is to boil to kill bacteria.

In most plain areas, electric kettles can generally boil water at or close to 100. Tap water itself is safe and hygienic, and bacteria can basically be killed when the water is boiled. <

Whether it reaches 100 degrees depends on the environment in which the electric kettle is used. It cannot reach 100 degrees at high altitudes, and can only be approached in areas close to sea level. The temperature of boiling water is not that strict, and the purpose is to boil to kill bacteria.

In most plain areas, electric kettles can generally boil water at or close to 100. Tap water itself is safe and hygienic, and bacteria can basically be killed when the water is boiled.

The boiling temperature of water is related to atmospheric pressure or altitude, living at high altitudes, the atmospheric pressure is lower, and the boiling temperature of water is also lower, it is difficult to reach 100, in order to speed up the cooking of food, pressure cookers can be used to cook rice in plateau areas.

Summary. Hello! To answer to you, the automatic kettle does not boil to 100 degrees, it may be a problem with the power supply, and the power consumption is low.

First of all, check whether the water level in the pot is enough; Secondly, check whether the pot wiring socket is faulty and whether the power supply is normal; Observe the ambient temperature and humidity parameters of its use, if the ambient temperature is too low, it may cause the water temperature in the pot to be more difficult to raise; Finally, replace the power supply (larger capacity) or update the pot program to achieve the best results. If none of the above is a problem, it is recommended that you contact the manufacturer for further inspection.

I adjusted it to 100 degrees and boiled the water again, but it still didn't work.

Hello! To answer to you, the automatic kettle does not boil to 100 degrees, it may be a problem with the power supply, and the power consumption is low. First of all, check whether the water level in the pot is enough; Secondly, check whether the pot wiring socket is faulty and whether the power supply is normal; If the ambient temperature is too low, it may make it more difficult to increase the water temperature in the pot; Finally, replace the power supply (larger capacity) or update the pot program to achieve the best results.

If none of the above is a problem, it is recommended that you contact the manufacturer for further inspection.

Boiling water can only be boiled up to 77

Dear, your automatic kettle may have the following problems:1The warm-up circuit is not activated:

An automatic kettle may contain a preheating circuit that is responsible for activating the heater while maintaining a certain temperature. This means that if the trouser chain digging circuit is not activated, then the heater will not work, so that the water cannot reach a temperature of 100 degrees. 2.

Poor pin contact on the circuit: It may be that the poor pin contact on the circuit board causes the circuit to not work properly, so that the water can only boil to 77 degrees. 3.

Controller failure: If the controller is faulty, it may cause the water to fail to boil or only burn to a temperature level below 100 degrees. Roll over.

Summary. Good afternoon, dear, and I'm honored to answer your <>

The reasons why the automatic kettle can only burn to 80 degrees are: the heating power of the kettle is insufficient, the thermostat fails, and there is stagnant water or impurities inside the kettle that affect the heating effect. The workaround for an automatic kettle that only boils to 80 degrees is:

1.Check whether the heating power of the kettle is sufficient, if the power is insufficient, you need to replace the heating tube with high power or the entire kettle. 2.

Check that the thermostat is not working, and if so, replace the thermostat or the entire kettle. Finally, clean the inside of the kettle to remove stagnant water or impurities to improve the heating effect. At the same time, when using the automatic kettle at ordinary times, you should also pay attention to the maintenance and maintenance of the kettle to ensure its normal operation and prolong its service life.

I hope mine can help you

The automatic kettle can only boil to 80 degrees.

The automatic kettle can only boil to 80 degrees.

Good afternoon, dear, and I'm honored to answer your <>

The reasons why the automatic kettle can only burn to 80 degrees are: the heating power of the kettle is insufficient, the thermostat fails, and there is stagnant water inside the kettle or miscellaneous sylphites affecting the heating effect. The workaround for an automatic kettle that only boils to 80 degrees is:

1.Check whether the heating power of the kettle is sufficient, if the power is insufficient, you need to replace the high-power heating Zen tube or the entire kettle. 2.

Check that the thermostat is not working, and if so, replace the thermostat or the entire kettle. Finally, clean the inside of the kettle to remove stagnant water or impurities to improve the heating effect. At the same time, when using the automatic kettle at ordinary times, you should also pay attention to the maintenance and maintenance of the kettle to ensure its normal operation and prolong its service life.

I hope mine can help you