How to clean the Midea electric kettle? Do you know how to buy an electric kettle?

Midea kettle is a steam intelligent induction temperature control product, which has the functions of automatic power off after water boiling, fast heating speed, anti-drying and power failure. However, when the electric kettle is used for a long time, a lot of scale will appear, which will affect the water quality. At this point, it is necessary to clean it in the right way.

How to clean the electric kettle of Midea.

Method 1: Remove limescale with vinegar.

This method is arguably the easiest and most practical method. The main components of limescale are calcium carbonate and other carbonates. The acetic acid in vinegar reacts with it and tends to produce water-soluble substances, minerals, and carbon dioxide.

For gasoline, white vinegar is usually available in supermarkets. Put 10% white vinegar on the scale of the kettle, add water, boil for about an hour, then scrub. Old vinegar is good, but old vinegar works better.

Not as good as white vinegar.

Method 2: Peel the potatoes to remove limescale.

After using an aluminum pot or aluminum pot for a while, you can see that there will be a thin layer of limescale on it. Put the potato skins in it, add an appropriate amount of water and cook for about 10 minutes.

Method 3: Descaling when boiling sweet potatoes in an electric kettle.

Put more than half a pot of sweet potatoes in the pot, add water so that the sweet potatoes can be cooked, and then bring the water to a boil to see if limescale accumulates. But after the sweet potatoes are cooked, be careful not to scrub the inner wall of the kettle, otherwise it will lose the descaling effect.

Method 4: Baking soda removes limescale.

The heating plate of an electric kettle is generally made of aluminum. When an electric kettle boils water, limescale can easily form. In general, we can put a teaspoon of baking soda and boil it for a few minutes to remove the scales.

This way, you can pour in about 500 grams of baking soda with a concentration of 1%, shake it gently, and the limescale can be removed.

Method 5: Boil eggs to remove limescale.

In a general electric kettle, if used for a long time, the sediment will be hard and difficult to remove. If you use it to cook eggs twice, you can achieve the effect you want. Remember to gently break the two eggshells and put them in the bottle.

Pour in half a pot of water, stir with a blender or spoon, then bring to a boil and let stand for about half an hour. At this point, you can pour out the eggshells and rinse them twice with clean water.

2. How to buy an electric kettle.

1.Take a look at the models and types.

There are many types of electric kettles, the common ones are: ordinary electric kettles, automatic temperature control electric kettles, and automatic electric kettles with air pressure water supply devices.

2.Look at performance.

Secondly, it depends on the performance because an electric kettle is an appliance that works with water. When you buy electrical appliances, you need to pay attention to the performance of electrical appliances to ensure that there are no leaks.

3.Take a look at the connectors.

It also depends on whether the connection between the power pin connector and the kettle is reliable, and whether the disassembly and assembly are flexible, so as not to affect the normal use.

4.Take a look at the interface.

The interface between the heater and the kettle body must be installed firmly, the air tightness must be good, and there can be no water leakage. When purchasing, you can gently move the heater by hand to check whether the assembly is firm and there should be no loosening.

You can put some baking soda in the kettle, soak it for a few minutes, and rinse it with water. I know. When choosing a big brand of electric kettle, you should also pay attention to other problems now, and pay attention to the quality problem.

I know, pay attention to the brand, pay attention to the cost performance, efficiency, pay attention to the capacity, when cleaning, pour out all the water inside, add some baking soda, soak for a while, and scrub it clean with a brush.

If you want to clean the electric kettle, you can buy a cleaning liquid to remove scale, and pour this cleaning liquid directly into the kettle to complete a cleaning job. When choosing an electric kettle, you should choose one that is not easy to have scale, and you should also choose a better quality, choose a slightly larger capacity, and be suitable for your own home.

When cleaning, you need to pour some detergent into it, and then clean it with a rag, and then rinse it with water.

1. The electric kettle must be cleaned regularly after being used for a long time, otherwise the stains will enter the human body with the water and affect the health of the body. The first is the method of removing scale, you can use white vinegar, which is the simplest and most practical method. Because the main ingredient of scale is calcium carbonate, the scale will be dissolved when there is a chemical reaction with white vinegar, put it in 10% of the scale of the kettle white vinegar, then fill it with water, boil it for about an hour, and then brush it, you can also use descaler, the effect is also obvious.

In addition, you can also use baking soda to remove limescale, you can put 1 teaspoon of baking soda and boil for a few minutes to remove the scale.

2. The method of removing stains is also very simple, prepare cotton swabs, toothpicks and alcohol. Remove the cotton part of the cotton swab and put it on a toothpick, pour a small amount of alcohol, dip it with a toothpick and use it to wipe the base of the electric kettle. The base is an easily overlooked position, especially prone to dust and dirt accumulation that affects heat conduction, wipe along the contour with a toothpick, and wipe the inner corners clean.

There is no need to worry about alcohol at all, it is very volatile and will not leak electricity, and all corners can be wiped before use to prolong the service life.

1. When cleaning the water heater, the first thing you need to do is to close the power valve at home and the water inlet valve of the water heater, and then install the drain pipe on the pressure relief hole of the safety valve of the water heater, and open the hot water valve of the water heater to the maximum, and the water in the water heater will be discharged.

2. Wait for all the water in the water heater to be discharged, then add the special cleaning agent of the water heater to rotate for cleaning, and finally inject cold water through the cold water port to flush the water heater, and the dirty water that is cleaned inside will be automatically discharged from the drain outlet.