How to fix the car headrest, and how to take off the pin that fixes the headrest on the car seat?

Hello, in the case of car headrests, there is not a strip of tape on the back. It can be put directly on the seat. Specifically, I need to be able to help you.

There are ties on the back of the headrests of the car, and the ties are crossed. The other is the experience of surrounding, which is two stealing around the axis, sending him a few and fixing it.

The car headrest has an elastic band, which can be put directly over the car seat. If you want to fix it firmly, you can tie the elastic band tighter.

There is a button on the shoulder of the seat, and you can move the headrest up and down to adjust it when you press and hold. The full name of the car headrest is the car seat safety headrest, and his appearance is mainly an auxiliary device set up to improve the safety of the car. Because when rear-ended, the seat belt will not work.

The pillow can be fixed with a cable tie and then tightened with screws.

The car headrest is fastened firmly, and this should be through the snap of the headrest. Put the buckle in the locked position to really fix it.

Car headrests are all with one of those elastic bands.

Just put it on top and you're good to go.

If you want to fix it a little more securely, you can use a cable tie yourself and tie it tightly.

Car headrests tend to have only one elastic band in the back, which is indeed easy to loosen and easy to lose elasticity, and you can buy that kind of Velcro.

Car headrests, their fixation is carried out with bandages.

How to fix the car headrest? Generally, there are snails or stuck nests to fix it.

How to fix the car headrest, he has a fixed bag, you follow his bag to fix it step by step, and our back pillow is OK.

This one has a fixed rope, which can be tight enough, or you buy an elastic rope to wear.

How do you fix your car headrest, you can tie a clip to the back, and fix her headrest more tightly?

How to fix the car headrest, it seems that there is also a screw, you can tighten the screw.

How is this fixed? Can you buy a version of God? Then put it with the back seat, and he will be more secure.

How to fix the car headrest firmly? Nowadays, those who sell car headrests have fixtures, and they can be fixed directly.

You have to make it firm, especially this kind of pillow.

There is a plastic button below one side of the two support rods of the car headrest, press it to move up and down and adjust the position of the headrest, while pressing it, the headrest can be completely pulled out upwards, the headrest can be removed, only the headrest support rod needs to be directly inserted into the highest gear of the headrest when installing, and the headrest position is adjusted by pressing the button again.

Automobile headrests belong to one of the testing items of the national compulsory vehicle certification, and there are very strict regulations on the material, strength, energy absorption, position and size of the headrest.

Car seat headrest precautions.

Even if the speed of the vehicle is only 10 km h, in the event of a collision, the acceleration and deceleration forces of the vehicle are all squeezed on the fragile neck of the person, and if the car headrest is not protected, the neck of the driver and occupants in the car is easily injured.

Under the same conditions, the probability of neck injury in a rear-end collision was reduced by 24% compared to that of a driver using a good quality headrest compared to a low-quality headrest.

Hello, just press the following:1There is a plastic button under one side of the two support rods in the headrest, which can be pressed to press. Move up and down and adjust the headrest position.

2.The headrest can be removed by pulling it out completely upwards while pressing it.

3.To install, simply insert the headrest support rod directly to snap into the highest gear of the headrest, and adjust the headrest position by pressing the button again.

1.Loosen the seat backliner:

Put your hand on the back liner of the seat and touch it all the way down, and when you reach the bottom, touch your finger forward, and you will feel the buckle, and then loosen the buckle.

2.Pull the headrest lock:

When the backliner buckle is loosened, the backliner of the seat will not be tightly taut on the seat, and you can reach through the gap between the backliner and the seat. Stretch it all the way up, and then your hand will touch the pin-like spring made of wire, one on each side of the two connecting rods; Pull both of these springs to the side of the headrest connecting rod (or a transverse lever similar to the front and rear adjustment levers of the front seat). Pull this lever) The lock of the headrest is opened, and it is easy to remove the headrest.

Additional Notes:1The seat liner refers to the part of the back of the seat.

2.When removing the backliner buckle, it's a good idea to adjust the seat to tilt back so that it's easier to pull the backliner buckle.

3.Some seats have tighter backliners, so you need to use tools to loosen the backliner buckles.

4.If you're not sure which is the backliner buckle, you can put your hand on the bottom of the backliner, hold it, and shake it from side to side, indicating you're in the right place.

5.Once the backliner buckle is open, adjust the chair to lean forward so that your hand can reach in and pull off the headrest link.

Take a look at the car manual, which is there.

<> "How to use the car headrests correctly.

Headrest height is too high: does not cushion head impact.

Some car owners or passengers like to raise the headrest so that the headrest is higher than the head, and it is said that this adjustment can give the head a sense of protection from the top down. In fact, this so-called sense of protection is just an illusion.

The softest part of the headrest is in the middle, and the height of the headrest is too high, and the back of the head can only touch the lower edge of the headrest, and the cushioning effect of the head fluid rubber pillow is impossible.

The height of the headrest is too low: it is easy to cause cervical spine breakage.

Some car owners or passengers like to lower the headrest and use the headrest as a neck pillow, thinking that this adjustment can better support the neck and avoid fatigue.

If the headrest height is adjusted too low, the consequences will be more serious: when the vehicle is impacted, the head will instantly reverse the headrest due to inertia, and because the headrest height is too low, the neck will hit the headrest in a whipping state, resulting in the fatal injury of cervical spine breakage.

Start by adjusting the angle of the seat so that your back is as upright as possible.

Before adjusting the height of the headrest, what we have to do is adjust the angle of the seat back.

We know that the parts of the human body where the headrest and the seat back come into contact are the head, neck and back, and the more the angle between the head and neck and the body tends to be flattened, the less the degree of injury to the occupants in the event of a vehicle is hit.

It is important to note here that the angle of the seat back is not as straight as possible, and you should try to keep it slightly tilted back.

The headrest should be at head level.

The softest and most protective part of the headrest is in the middle of the headrest.

Therefore, the height of the headrest should be adjusted so that it is level with the head, or that the soft middle of the headrest is parallel to the upper edge of the ear.

When the vehicle is hit violently, the headrest can effectively protect the head and cervical spine.

Keep the distance between the back of the head and the headrest as small as possible.

From a physical point of view, the smaller the distance between the back of the head and the headrest in the event of a car impact, the greater the cushioning effect of the headrest on the head and neck.

This spacing should not exceed 4 cm at most, which is equivalent to the width of two fingers side by side.

In addition, we can also add a neck pillow to the seat to enhance the protection of the seat.

After adjusting the height of the headrest, it is necessary to see whether the latch position is stable.

After adjusting the seat angle and headrest height according to the above steps, the headrest should be fixed in the corresponding height of the card position, so that the headrest does not shake, and the length of the two bolts inserted into the fight should be next to each other.

Car headrests are not only for creating a sense of comfort, but also for the protection of occupants in an emergency.

Therefore, in the process of daily car use, we should pay attention to the adjustment of the height of the headrest, so that the headrest becomes a device to protect us, rather than just caring about whether the headrest makes us comfortable.

Loosen the seat backliner, after the backliner buckle is loosened, the seat backliner will not be tightly stretched on the seat, pull the headrest lock, and remove the headrest is very easy.

When the vehicle is rear-ended, the human body will fall backwards due to inertia, and the pressure of the vehicle to accelerate or decelerate is concentrated in the fragile neck and head of the human body, and the headrest plays a cushioning role to protect the human head. It is mainly divided into two categories, one is non-adjustable, the other is adjustable, and the adjustable car headrest is divided into manual adjustable and automatic adjustable, wherein the manual adjustable can only do one-way adjustment of height, and automatic adjustable can be automatically adjusted in the two-dimensional direction.

The role of the headrest

In 26% of rear-end collisions, the head or neck of the driver and occupant will be injured, and in the same rear-end collision accident, the correct use of the car headrest is 40% less likely than the incorrect use of the car headrest, and the probability of neck injury is 24% lower than that of the driver and occupant who use the incorrect headrest.

Most of the common headrest fabrics on the market are made of high-grade silk wool, suede or pure cotton, which is filled with fluffy cotton. Some inferior headrests are filled with "black-hearted cotton", which is harmful to human health, so you should pay more attention. If you shop online, if you don't know much about some of the details of car headrest purchase, it is recommended that you go to a professional car supply store or buy it online**.