What do you know about the installation method of ceiling lamps in the living room?

How to install ceiling lights in the living room, choose the right location for the installation of ceiling lights. For example, ceiling lamps in the living room, dining room, and kitchen are best installed in the middle of the top surface, so that the light in all directions will be more even. As for the bedroom, considering the effect of mosquito nets and light on sleep, ceiling lamps should not be installed above the bed as much as possible.

Remove the mask before installing the ceiling light. In general, there are two ways to fix the ceiling lamp mask, namely swivel and snap. Pay attention when disassembling to avoid damage to the ceiling light.

After taking off the mask, also take off the lamp to prevent the lamp from breaking during installation. Mounting the base places the base in the intended installation position, marks the wall with a pencil, and then removes the base and uses an electric drill to drill holes in the marked location. Then install the expansion bolt fixing the base in the hole, note that the drilling diameter and buried depth should be consistent with the bolt specifications.

After that, put the base back in its intended position and secure. When installing the cable base, the mains power should be turned off. It should be noted that the electrical contact between the two terminals connected to the power cord of the ceiling light should be good, wrapped in black rubber cloth, and kept at a certain distance.

Try not to put the ends of the two wires under the same metal sheet to avoid the danger caused by short circuits. Once the mask is installed, the wires and pendants are connected, and the power is ready to be applied. If everything is in order, then go ahead and install masks and accessories.

Therefore, it is recommended that when choosing a ceiling lamp, you should choose a lampshade that is not easy to damage. This should be of particular concern to families with children. Acrylic lampshade is the best choice.

It is not recommended to use glass lampshades, and ceiling lamps with glass lampshades are also prone to damage. The second tip for choosing a ceiling lamp in the living room: look at the light transmittance.

When choosing it, you should look at how it transmits light.

Only light with good transmittance can emit a uniform light source and feel comfortable to use. Uneven materials not only affect the brightness of the lamp, but also damage vision. There are also some low-light shadows, although beautiful, but they will affect the indoor light, and we do not recommend that you choose them.

The third tip for buying ceiling lights in the living room: look at the specifications. While these lights may look similar, there are a lot of ingenuity when buying.

The fourth tip for buying ceiling lamps in the living room: If the living room space is large, it is recommended to choose a cylindrical ceiling lamp of a certain height to make the living room appear wider; Or it can be rectangular or larger ceiling lamps, which can also effectively expand the visual space.

The installation method is to leave a wire before installing the ceiling, and then connect the ceiling lamp, and then align the ceiling lamp, fix the position with screws, install the outer sleeve, and it is completed.

Generally, the built-in ceiling lamp is chosen, so that the ceiling lamp is directly embedded in the roof, which looks very atmospheric and is very simple to install.

I don't know much, but when installing, you must choose a suitable position, and at the same time, you must choose the right light, for example, you can choose a warm yellow one, and you must choose the right size and dimensions, and you should also fix the position of the chassis.

Steps to install ceiling lights: 1. First of all, some tools such as percussion drills, electrician pliers, screwdrivers, insulating tape, a small piece of wood, and ladders must be prepared first, and do not wait until the installation is in a hurry, so as to facilitate our operation. 2. Before installation, we must first determine its installation location, generally speaking, the lamps are installed in the center of the room, so that the light of the whole room can be evenly distributed, and the light in each position will be more even.

But for the bedroom, for the sake of our sleep quality, it is recommended that the ceiling light should not be installed directly above the bed, so that we will not be disturbed by the harsh light when resting, and we can have a better sleep quality. 3. Open the package of the lamp, then take out the lamp and put the screws aside. Hold the lamp base, stand on the ladder chair, place the lamp holder on the roof wire, place it flat and aligned, and then make a mark with a pen.

Nowadays, small commercial houses are favored by many consumers, because the house space is relatively small, so when choosing lamps and lanterns, we will be more inclined to fashionable and generous ceiling lamps. The installation method of the ceiling lamp is also relatively simple, and many consumers will choose to install it themselves, so what is the installation method of the ceiling lamp in the living room? Next, I will briefly introduce it to you.

1. First of all, we need to prepare percussion drills, electrician pliers, screwdrivers, wooden ladders, insulating tape and other related tools. Before installation, check whether the ceiling lamp is damaged. We need to disassemble the lampshade and lamp tube of the ceiling lamp separately, and when disassembling the lamp, we need to remove one side of the lamp bracket first.

2. Under normal circumstances, when we carry out interior decoration, we will leave the installation position of the living room lamps. Place the base of the ceiling light on the installation position of the ceiling, then draw the location of the mounting holes, and make holes in their places. Next, we need to fill the holes with colloid, and when installing ceiling lamps in masonry structures, we need to use embedded bolts instead of wooden wedges.

3. Then we put the base of the ceiling lamp and fix it with screws. The next step is to connect the wires, before connecting the wires, we need to turn off the power supply, and then connect the power cord of the ceiling and the power cord of the ceiling lamp, the connection of the power supply should be wrapped with black tape, and the two wires cannot be placed under the same piece of metal, and need to be kept at a certain interval. After the wires are connected, we need to install the lamp, and then turn on the power to let the filial piety liquid and see if it will be bright.

Finally, the lampshade is installed. Tanwu.

When installing the ceiling lamp, we should pay attention to the connection reliability of the lamp and the installation, and the diameter and buried depth of the borehole need to be consistent with the bolt specifications.

The living room is an important place for leisure, so its decoration will greatly affect the guests' views on your entire aesthetic taste and home taste. The ceiling lamp in the living room is a very good choice, and I will introduce the key points of installation and maintenance of the ceiling lamp in the living room.

First, the main points of installation of ceiling lamps in the living room.

1. Punch holes in the cement ceiling of the kitchen first, and then knock the plastic anchor into the ceiling hole (if it is a suspended ceiling, the ceiling plate can be fixed directly on the ceiling with screws).

2. Connect the power test lamp, remove the test lamp line after normal operation, connect the power cord to the position of the original test lamp line of the ceiling plate, ensure that the power cord is effectively connected, and pay attention to distinguishing the zero and live wire.

3. Put the flat pad on the screw, and the screw is screwed clockwise through the hole of the ground into the plastic cko tightening suction top plate.

4. Buckle the lampshade onto the ceiling plate, rotate the lampshade clockwise, and fix the lampshade on the ceiling plate.

Second, the living room ceiling lamp maintenance.

1. You need to remember that after buying back the lamps, don't be busy installing them first, you should carefully look at the marks of the lamps and lanterns and read the installation and use of the imitation sheet, and then install and use the lamps according to the rules of the imitation sheet, otherwise there may be risks.

2. Replace the aging lamp in time according to the light source parameters supplied by the sign, and when it is found that the two ends of the lamp are red, the lamp is black or has a black shadow, and the lamp does not light up, the lamp should be replaced in time to prevent the ballast from burning out and other unsatisfactory phenomena;

3. Be careful not to change the structure of the lamps and lanterns during clean maintenance, and do not change the parts of the lamps at will. 4. Try not to switch on and off again when using LED lamps, which will greatly shorten the service life of LED lighting.

When choosing a living room ceiling lamp, you should also pay attention to the harmony of its style and overall home style, shop around, carefully understand the brand of living room ceiling lamp and its services, if you have more questions about living room ceiling lamps or other decoration categories, welcome to enter Fuwo Home Improvement Network, we will provide you with more detailed information.

Living room ceiling lamp purchase: the first thing to consider when choosing lighting fixtures is the potential safety hazards. The first thing to look at is the quality of the lighting fixtures, and check whether the quality inspection commitment letter and certificate of conformity are perfect.

When assembling, it should be noted that the hook of the ceiling lamp must be able to bear 6 to 8 times the weight to prevent the ceiling lamp from bursting out and hitting people.

The dining room lamp in the living room is either a ceiling lamp or a ceiling lamp in the living room, which is generally selected according to the relative height of the living room. If the relative height is more than three meters, you can choose a ceiling lamp as a dining room light, which will make the whole space look brighter. If it is less than three meters, we still recommend the ceiling lamp in the living room as the main light, which will not make the whole space look oppressive, and will make all the large living rooms brighter and more stylish.

If the large living room is more than 30 square meters, it is recommended to choose the ceiling lamp as the main light, if it is less than 30 square meters, it is recommended to choose the living room ceiling lamp as the dining room lamp.

The method of installation after buying: the electrical contact between the two terminals connected to the power supply of the ceiling light switch in the living room should be excellent, and each should be wrapped with butadiene cloth and maintained at a certain distance. If possible, it is best not to put the two terminals under the same copper sheet to prevent short circuit failures and accidents.

The neutral wire of the live wire should be connected to the terminal of the core circuit breaker, and the neutral wire should be connected to the screw terminal; When replacing the bulb, the insulating casing of the socket must not be damaged or leaked to prevent electric shock. When installing the ceiling lamp in the masonry, it should be fixed with embedded bolts or expansion screws, polyester plugs or plastic plugs, do not use wooden wedges, and the bearing capacity of the above connectors is consistent with the weight of the ceiling lamp in the living room.

In turn, the ceiling lamp in the living room is fixed, firm and reliable, and its service life is increased. When the expansion screw is selected to fix the immobility, the bolt specifications should be selected according to the technical standards of the new product, and the hole diameter and embedding depth are consistent with the bolt specifications. Punch holes in the roof with the car chassis.

Punch holes and put in the surging rubber stopper. Run the cable over the main chassis and use the set screws for the main chassis. Wire routing.

Assemble the fluorescent tube and lamp cover. After the lighting is installed, plug it in and turn on the lights for testing. Ceiling lamps in the living room cannot be installed directly in flammable objects.

Some homes use lacquered wood-based panels to decorate the reverse side of the ceiling lamp in the living room to add artistic beauty.

The ceiling lamp in the living room should be as simple as possible, the brightness should be higher, and you can choose the style of the ceiling lamp according to your overall decoration style, and you can decorate it after you buy it.

To choose according to the decoration style, try to choose a relatively high safety factor, need to disassemble, and then connect the relevant wiring, generally there are two kinds of buckle and rotation, directly install the mask.

When choosing the ceiling lamp in the living room, it is mainly based on the decoration style of the home, as well as the color of the wallpaper, the color of the door frame and the window frame.

There are many kinds of ceiling lamps in the living room, different styles, and now there are too many on the market, so how do we buy ceiling lamps in the living room, I believe many friends don't know it, it doesn't matter, today I will introduce you to the purchase and installation of ceiling lamps.

The purchase of ceiling lamps in the living room:

1. SafetyWhen buying a ceiling lamp in the living room, you should pay attention not to choose a damaged one, and do not use a ceiling lamp with a glass cover, and you can't just look at the cheap, be sure to check whether the ceiling lamp is qualified, the production date, the warranty book, etc., but it is not to blindly choose the expensive one, and there may be safety factors in the expensive one, so you must put safety first.

2. Light transmissionYou must pay attention to the fact that if you find that the light transmission performance of the village material is very poor when you buy it, it will definitely affect the daily light, so it is best not to buy it.

3. DurableIf the quality of the lamp is not good, it is very easy to blacken, which not only affects the light of daily lighting but also affects the length of use of the ceiling lamp.

Living room ceiling light installation tips:

Prepare tools: drills, pliers, screwdrivers, wooden strips, wooden ladders.

1. Drill a 3-4 cm hole in the position of the roof to be installed.

2. To fill the hole, you can use a piece of wood, but it must be plugged tightly, and if it is not tightly plugged, it must be smashed.

3. The position of the wooden strip must be fixed on the chassis of the net ceiling lamp, and it should be noted that the wire must be taken out first.

4. Now that the chassis of the ceiling lamp is also fixed, then connect the wires that have just been taken out with the wires of the chassis, then pack them, and install the lamp and lampshade.

Tips: You must pay attention to your own personal installation and false pretending, pay attention not to the side to the wire when the impact drill, this suggestion to find a professional is better, in fact, you can also buy the lamp in **, you have to ask the boss to find someone to install, but to add money, but it doesn't take much money, professionals are relieved after all, they have no experience.

The above mainly introduces the ceiling lamp brand and installation tips, ceiling lamp I believe everyone has heard of it, there are many brands, I personally feel that it is Huayi that I trust more, but it also depends on personal preferences, well, today I will introduce you here, I hope to help you.

You can get it for free