Do you have to leave more sockets for decoration? How should a novice plan be reasonably arranged?

Try to install more sockets, otherwise if you don't have enough later, it will be more troublesome. Newbies should pay attention to 1The socket can not be installed in a hidden position below, if you accidentally splash water into the socket when mopping the floor, it is easy to cause leakage2

Several different electrical appliances cannot share a socket, and it is easy to burn out the socket due to excessive power 3The ground position cannot be changed.

Yes, because there are more outlets to use various appliances. First of all, we must make a decoration design plan in advance, then plan the placement of furniture, and then set aside the range of sockets.

Yes, the socket is very important, now there are a lot of electrical appliances, at least 3 in the bedroom, 5 in the kitchen, 5 in the living room, in short, the more the better, more to use it is convenient.

I'm afraid my kids will use them as toys when I'm not looking. So I was thinking, there are fewer sockets left in the house, can I ask the electrician to add one next to me? After inquiry, the electrician did not recommend my family to do this, it is more troublesome, and it will destroy the previous wall, but it is not unreasonable to add another one next to the socket.

I have to do this for the safety of my children! In addition to the air conditioner, there is no need to rewire a new outlet from the meter. So the master directly used a chisel tool to chisel a groove next to the original socket, which could support the bottom box of the socket.

Then a hole is bricked on the edge of the original socket box, which can connect three square copper wires to introduce the wires into the newly installed back box.

It is better to plug in more powerful equipment here, the load on the line will be unbearable, and it may break. The network cable is the same as the wire, but the wiring in the wall is not laid well, and the open wire can go. When walking, try to walk behind large furniture or on the inside of the ceiling to maximize the aesthetics of your home.

Individual lines that must be exposed can be decorated with beautiful trunking. In addition, if you take the topstitch, you may encounter the following four problems: the network cable can be directly exposed to the air (you can fix the network cable to the wall with a wire clip).

Of course, for the sake of aesthetics, it is recommended to use it with a trunking. The connector of the network cable can be bought online, and the effect is better than the wire connector made by yourself. One point two, one point three, a little more can be - but the splitter must be ***, otherwise it may affect the network speed.

You can also buy a surface-mount network socket directly. In the process of laying network cables, try to stay away from motors and electromagnetic equipment. For example, refrigerators and air conditioners belong to motors; Microwave ovens and induction cooktops are both induction cooktops.

If you have to touch these things, you can wrap a layer of aluminum foil on the outside of the network cable, or buy a network cable with a shielding layer. The wifi signal may not reach places where the network cable can't. Now, almost all devices that need to use the network can be connected wirelessly.

So as long as the wifi signal is enhanced, there will be fewer network ports. Our common routers have limited power (to prevent radiation from affecting the human body), so it is difficult for even the best router to cover every corner of the home. But we can also use multiple routers.

The living room and master bedroom are exactly one at the east end and the other at the west end. Then I can buy two wireless routers and install them on the network sockets in both rooms. In this way, the wireless signals they transmit can cover the entire house together.

There are no requirements for router parameters. The setup method is simple, and users can ask the store owner when buying a router. It is recommended to set the name and password of the two routers to the same, so that when our mobile phone moves, we can choose the one with a stronger signal to switch automatically.

If your room is too big and there are too few network cable outlets, even if each outlet is connected to a wireless router, the wireless signal still can't cover the entire house, it's time to consider the electric cat.

If you don't have to go to the hassle, you can re-groove the wall, lay out the wires, and install the sockets.

You can consult with the relevant professional circuit remodeler, let them design the corresponding transformation plan, and find some workers to modify it.

There are two ways to increase the socket after the renovation

First, you can add sub-sockets to the original socket;

Second, it can be connected to an external drag line board.

How to increase the socket at home after the renovation, how to increase the socket at home after the renovation, how to increase the socket after the renovation? If you add this, it will be more troublesome, and I recommend using a multi-functional plug-in board.

It is only possible to lay open wires and install exposed sockets locally and as needed.

This situation can only go through the bright line.

Design socket layout reservation when decorating: If you want to carry out pre-embedding, you can set up more in the bathroom, because some people will blow their hair after taking a shower and continue to use the washing machine, so if there is no power socket at this time, it is likely to cause inconvenience. Everyone can install a power socket next to the toilet, because some people don't have a computer if their mobile phone happens to be there, they also want to be able to watch dramas in the bathroom next to it, so you also have to meet some requirements of the public.

If you're worried about the water coming in, make sure to make a partition on the side.

Problems to pay attention to: TV background wall, there are two options here, one is blocked by the TV cabinet, the height is 350-400mm relative height. The other is that the power socket is 550mm higher than the height of the TV cabinet.

The relative height of the socket position behind the fabric sofa is controlled at a height of 1000mm. In the bedroom, one double-opening double-control is installed on the wall of the entrance door, and the other double-opening double-control is installed above the bed table or in front of the bed, which is very easy to physically operate. Toilet and living balcony switches are installed in the room and cannot be assembled outside the bathroom or in the living balcony.

The range hood socket can be made into the kitchen cabinet The best thing is that if you don't make a wall cabinet bag, try to go as high as possible to cater to the part of the range hood, in case there are always many oil stains on the power socket.

The washing machine socket is 100 cm (40 cm in the dark type), the power socket behind the toilet is 30 cm, the height of the mirror lamp is 190 cm, and the power socket and power switch are about 135 cm. The power socket of the detached and wall-mounted air conditioner should be set at the distance from the road surface according to the reserved hole of the outlet pipe of the group, the power socket of the window air conditioner can be set from the road surface next to the dialog box, and the power plug of the cabinet air conditioner should be set at the corresponding part from the road surface. It is very likely that the small study room has more electrical equipment with electricity consumption, and it is proposed to install a plug bar there, and there may also be air conditioning needs to be buried in advance.

The layout of the socket set up during the renovation is usually closely related to the location of the appliances that are planned to be used. In addition to the necessary televisions, air conditioners, washing machines and other electrical appliances that need to be reserved for special sockets, there should also be enough spare sockets in the spare lot. Special attention needs to be paid to some issues in planning and operation, such as the socket should be kept at a certain height from the ground and not too low.

In addition, if it is a socket installed on a balcony or other wet location, the waterproof cover should be fully considered. For some electrical appliances with large power, the circuit of the socket needs to be occupied separately and should not be shared with other electrical appliances and sockets.

The layout design of the socket is the most easily ignored place in the decoration of the new house, but people living in modern society are inseparable from the demand for electricity, and the electricity demand of large and small electrical appliances such as TVs, computers, refrigerators, and mobile phones all determine the comfort of the owners in the later period. Therefore, the installation layout of the socket is also the top priority of home decoration. Before the socket layout, be sure to calculate the position height of the socket according to the size of the furniture, the number of sockets and other factors, so as to avoid the obstruction of the furniture and the clutter of the wires.

When decorating, first of all, you must change the water and electricity at home Before changing the water and electricity, you must reserve the layout of the socket at home, and you must know where it is and how high it is.

In the process of decoration, the layout of the socket is very crucial, and you should choose the right location according to your own usage habits. When arranging, try to choose a better performance and a better brand.

Every time you can't find the socket, is it so tired, when the socket at home is not enough, is it only to pull the line to the west, there are too many plugs in the row at home, not only look annoying, but also easy to produce potential safety hazards. At this time, do you deeply feel how important it is to install a few more sockets when decorating? However, the more sockets the better, so how many sockets are reserved for home decoration is the most appropriate?

Socket arrangement in each area.

Kitchen - 10 pcs.

Refrigerators, induction cookers, rice cookers, ovens, microwave ovens, hood machines, and sterilizers must be kept. Although water purifiers, warmers, and garbage disposers are not yet popular, it is best to reserve them first.

Nowadays, small household appliances are too convenient and popular, so remember to reserve 1-2 rice cookers, microwave oven spare sockets for electric kettles, juicers and other small household appliances. There is a fire in the kitchen, and the socket contains electricity, so be careful not to install the socket above the stove during the installation process to prevent overheating. Of course, there will be splashing water in the kitchen part of the washing space, and it is best to use a waterproof socket for these parts.

Bathrooms - 6 pcs.

Washing machine, water heater, smart toilet cover, hair dryer, exhaust fan, heater and bath bomb each one, and it is best to reserve one for electric fans. Bathrooms splash the most, so remember to use all waterproof outlets. The installation of bathroom sockets is worth noting that the bath bomb switch remembers to leave a few centimeters more than the position of Wei Zufeng, because this switch will generally be larger than the switch of the lamp, if the size is too small, it will be troublesome if it can't be installed in it.

Restaurants - 5 pcs.

Water dispensers, air conditioners, 2 near the dining table for induction cookers, and 1 on the blank wall for fans or TVs are about the same. For the sake of aesthetics and safety, you can also consider installing floor plugs on the dining table.

Living room - 10 pcs.

The living room is usually used as the main relaxation area, so the sockets here may need to be installed a little more. 2 TVs, set-top boxes, amplifiers, DVD players, stereos, air conditioners, sofa sides, for desk lamps and computers, and remember to reserve 2 for fans and heaters.

Master bedroom - 11 pcs.

One on each side of the TV, set-top box, air conditioner, fan, desk lamp, and bedside for easy charging. If your study room is in the bedroom, the host, monitor, and stereo all need sockets, and you have to remember to reserve one for a humidifier, etc. Second bedroom - 9

One TV, set-top box, air conditioner, fan, laptop, and bedside for easy charging and other backups, and it is best to reserve one for a blank wall.

Study-8 One host, one monitor, one audio, one air conditioner, one fan, one router, one in reserve, one to the printer and other equipment. The number of sockets in each space in the home is enough, and you also need to consider the details such as the height of the socket installation and the location of the switch, otherwise it will be very troublesome.

Although these are not yet popular, in the long run, it is better to reserve, anyway, it is better to reserve more sockets than not enough to solve the problem of beauty with a terminal board in the end.

If you choose a bad outlet, it may become more and more troublesome to use. The installation position must be close to the center, because only in this way will the furniture not be blocked. In the later conditions, if it can make it more convenient for you, then the design will be more reasonable, and you will pay more attention.

In the bathroom, it is best to leave a socket for a hair dryer, in the kitchen, the range hood and rice cooker all kinds of electrical appliances need at least 3 or 4 sockets to provide power supply, to plug in the socket, in the living room, TV air conditioning, water dispenser, sofa next to the need to reserve a few sockets, so that in these places can not use electricity.

Sockets can be reserved next to the TV, next to the bedside table, next to the sofa, on the surface of the kitchen and under the dining table. Because these places need to be designed with some sockets.

According to the use of household appliances, there are also reserved sockets for the connection of wiring, pay attention to the location of the reserved sockets in the bedroom and kitchen, and pay attention to the method when reserving the sockets.

In accordance with the use of household appliances, there are still reserved sockets for the connection of wiring, and it is necessary to pay attention to the status of reserved sockets in bedrooms and kitchens, and pay attention to the method of reserving sockets at all times.

Seriously, there are a lot of things that must be paid attention to in decoration. Especially for the layout of switches and sockets, a certain amount of space should be reserved, and at the same time, it should be marked, otherwise when decorating, this space will be forgotten and the position of the switch and socket will be blocked. Today, let's summarize the things that need to be paid attention to before the renovation of the switch and socket.

1. For both air switches and false alarms, if you encounter household appliances with very high power, you must run the wires separately, because they require a large load on the wires. For example, water heaters, air conditioners, refrigerators, etc.

2. Compared with other spaces, there are many household appliances in the kitchen, and the power consumption rate is also very large. Therefore, it is recommended that you use the main line of the 4 parties and the branch lines of the square and the square, so as to avoid the phenomenon of tripping.

3. Remember to walk a line on your stomach in each bedroom.

4. A socket should be designed next to the toilet in the bathroom, and you may install a smart toilet one day, and you will have to pry open the wall tiles to get the circuit.

5. You must remember to leave a few more sockets on the TV background wall, because you need to plug in wires, wifi routers and set-top boxes, etc. At the same time, you can also hide the socket in the cabinet to avoid all the wires being exposed, which is not good-looking.

This should be done:

In fact, before decoration, you can hide the pipeline with the help of embedded PVC pipes.

6. On the balcony, you should also leave an extra socket for the washing machine. At the same time, hide the faucet and drain behind the washing machine, so that it also looks good.

If you look at this, it looks much simpler and more beautiful.

7. In the same way, the socket of the range hood can also be hidden behind the range hood, so these must be prepared in advance, otherwise it will be very troublesome to install electrical appliances.