How to make up for the wrong location of the floor drain in the decoration shower room?

Once you've bought your new home, it's time to start designing and renovating it. If the toilet floor drains.

The location does not meet the requirements of the design, and it can be appropriately modified, which can make the overall effect better. So can the floor drain be changed, and what should we pay attention to after the floor drain is changed? Did you understand? Now let's take a look.

<> floor drain can be repositioned. However, the position of the floor drain after transformation should be as low as possible, and should be kept at a certain angle with the ground, so that the water can enter the floor drain smoothly. In addition, after the location of the floor drain is changed, it is necessary to do waterproofing again, and then carry out the follow-up process after the waterproofing does not have problems.

If your floor drain is installed in the middle of the shower room, Mr. Ou Dezheng is actually very likely to be in the corner of the wall, because the floor drain itself is to be installed in the lowest slope to ensure that the water flows down, installed in the middle, do not do slope treatment, installation. Come and go. We didn't take a good shower, the floor drain under your feet, the slightest carelessness will enter the water, standing in the dirty water.

If the original low-lying floor drain is too close to the water strip, once the water accumulates, it will affect the glass glue on the water strip.

If it turns yellow, it's not good. How to do the fluctuation placement of the toilet floor drain hole? I think if the floor drain hole is misaligned again, you should put it aside, and then find some professional people to repair it for you, they have many years of experience, so he will open the floor drain for you, and correct the misalignment for you in the future, so that they are no longer misaligned and ,.. parallel

So that there will be no other problems, good demonstration. I wish you all a happy Chinese New Year.

Do a detailed interpretation of the problem, I hope it will help you, if you have any questions, you can leave me a message in the comment area, you can comment with me more, if there is something wrong, you can also interact with me more, if you like the author, you can also follow me, your like is the biggest help to me, thank you.

When installing a shower, if the floor drain is pressed incorrectly, the entire shower will be unusable, and if you want to remedy it, you can reinstall the water heater in place.

I think at this time I can only install the position of the shower, that is, install it on the opposite side, so that it is relatively complete and can make up for it.

You can install a floor drain, but you must do a good job of waterproofing in the early stage, and the water should be unblocked, and a slope should be left.

It is enough to assemble a floor drain, but the waterproof task must be done in the early stage, the water must be unblocked, and a slope must be left.

When decorating a bathroom, the location of the floor drain is very important. If the floor drain is in the middle, the following conditions may exist:

1.Cause analysis.

The location of the floor drain is in the middle may be due to poor consideration in the design, or the construction personnel of the bench are not serious and responsible. If it is a design problem, it is necessary to find a designer or owner to negotiate and solve it. If it is a construction problem, you need to find the person responsible for communication.

2.Resolution.

a.Reconstruction.

If the position of the floor drain is greatly offset, affecting the aesthetics and use effect of the entire bathroom, it may need to be re-constructed. This needs to be modified by finding the responsible manufacturer or construction personnel.

b.Attachments were added.

If the floor drain position is only slightly in the center, you can consider adding some accessories to solve the problem. For example, install a raised mesh around the floor drain with a drainage plate, which can guide the flow of water to the floor drain location and avoid water leakage.

c.Relayout.

If you can afford it, consider rearranging your bathroom. Relayout solves floor drain problems and optimizes the use and aesthetics of the entire bathroom.

3.Precautionary measures.

When decorating a bathroom, you need to consider the location of the floor drain in advance. Before construction, you can communicate with the designer and construction personnel to clarify the location and drainage direction of the Zaoyan floor drain. At the same time, you can choose floor drain products with good brand reputation and strong professional technology to ensure the use effect and safety of the bathroom.

In general, the location of the floor drain needs to be solved in time to ensure the effectiveness and safety of the bathroom. You need to find the cause of the problem and choose the appropriate solution to adjust. In the future decoration process, it is necessary to consider the location of the floor drain in advance to avoid similar problems.

The middle of the floor drain in the shower room can lead to poor drainage, which will affect the shower experience and may cause water to overflow the shower area, causing a safety hazard. In this case, appropriate adjustments and modifications are required to ensure the rationality of the location of the floor drain and the smooth drainage.

First of all, you can consider consulting with a professional renovation company to have a professional repair and remodel. Their experienced engineers can analyze different situations and provide practical solutions.

If you want to solve the problem on your own, you can take the following steps:

1.Open the drain of the floor drain in the shower room and check the drain for limescale or blockages. Remove the limescale and make sure the waterway is clear.

2.Drill holes in the drain location slightly in the direction of the offset, and install a drain pipe with appropriate finger grip to make the drain level level.

3.Floor drains should be installed in such a way that the ground is recessed in a relatively correct position to allow the water captured by the bucket and the upper filter to drain out.

4.If you do not have a floor drain pipe installed, and even if you adjust the direction of the drain outlet, you can still not meet the speed and flow rate of the water, you can choose a water valve with a large displacement to further increase the drainage efficiency to solve the problem.

In short, the middle of the shower room floor drain is a common problem. Getting this right will help improve the comfort and safety of your shower. Whether you DIY yourself or hire a professional fitting company, you should consider the criticality of drainage and take appropriate measures to ensure that the water is discharged quickly.

If the shower floor drain is high, there may be poor drainage or even water leakage, and some treatment measures need to be taken.

1. Reinstall the floor drain.

If the shower drain is too high, you can reinstall the drain and put the drain at the lowest point of the shower area to ensure a smoother flow of water. When installing a floor drain, you need to open the ground first and check whether the drainage pipes below are normal. If needed, the drains can be relocated or replaced for better drainage.

Second, the installation of water strips.

If it's not convenient to reinstall the floor drain, consider installing a strip between the drain and the shower. This effectively stops water from spilling out of the floor drain. When purchasing, it is necessary to pay attention to whether the purchase width and seam amount are suitable for the installation of floor drains.

3. Add drains.

If the floor drain with a high location cannot be retrofitted, more drainage pipes can be added where drainage is needed to increase the drainage function. Try digging around the shower floor to direct the drain to the lowest point to ensure that the water drains from the lowest.

Fourth, the use of non-slip floor tiles.

It is important to avoid slipping, so non-slip floor tiles can be laid on the floor of the shower to increase the landing area of people and reduce the risk of slipping. When installing non-slip floor tiles, you need to pay attention to their anti-slip properties and surface friction coefficient to ensure people's safety in the shower.

All in all, to deal with the problem of high shower floor drain position, we can consider different solutions according to the specific situation of the shower space to ensure the reasonable use and safe use of the shower space.

If the position of the shower floor drain is high, it may cause poor drainage or even water leakage, which will not only affect the use experience, but also have an impact on the living environment. So, how to deal with the problem of the location of the shower floor drain is too high?

First of all, it is necessary to clarify the reason for the high position of the shower floor drain, whether it is due to a design problem or improper installation. If it is a design problem, you need to find a designer or a companion to negotiate to see if you can redesign or reinstall the floor drain. If it is a problem with improper installation, you need to find the person in charge of installation to check and confirm the specific cause of the problem.

Secondly, depending on the specific situation, the following methods can be adopted:

1.Reinstall the floor drain. If the height of the floor drain position is not too large, the original floor drain can be directly removed and reinstalled. It should be noted that the reinstallation of the floor drain needs to ensure the drainage slope and the tightness of the connecting pipes, otherwise there will be water leakage.

2.Increase the slope of drainage. If the height of the floor drain location is large, but the slope of the drainage pipe is not closed enough, you can consider increasing the drainage slope so that the water can flow to the floor drain.

It should be noted that increasing the drainage slope requires a redesign of the drainage system, involving nodes such as pipe location and connection methods, to ensure the stability and safety of the system.

3.Increase drains. If the floor drain is too high and the drainage slope adjustment still does not solve the problem, consider adding a drain to connect the water to another drain or drain.

It should be noted that the addition of drains needs to consider the problem of drainage volume and drainage system connection, so as to avoid the problem of blockage and leakage caused by new drains.

To sum up, the problem of high shower floor drain location needs to be dealt with according to the specific situation, and can be solved by reinstalling the floor drain, increasing the drainage slope or increasing the drainage outlet. In the process of treatment, it is necessary to pay attention to the stability and safety of the drainage system, ensure that the car is smooth, and avoid the occurrence of water leakage and other problems.

Ona shower room tells you.

Do you want to install it yourself? Accurate location needs to be measured The tools needed are pins, screwdrivers, hammers, white cement, and shovels (optional, used to coat cement).

First, use a hammer and a pin to gently knock along the edge of the gap between the floor drain and the floor tiles, and pay attention to the possibility of knocking the floor tiles; Then use a pin and a hammer to gently knock in the middle of the floor drain to loosen the gap just now (there will be a lot of problems in this, so you still have to pay attention); After removing the floor drain, use cement to level the place where you want to install the floor drain at the position of the previous floor drain; Then look at the sewer pipe mouth and the floor drain mouth (if the odor-proof floor drain will have a floor drain core, so the floor drain mouth must be aligned) and put it flat, after putting it down, seal the surroundings with white cement.

The problem of self-explosion of shower room has been plaguing shower room manufacturers and users. As one of the top ten brands of shower room, Zhongshan Aona Sanitary Ware****, after 5 years of hard work, finally developed a special explosion-proof film for shower room, which can double the explosion-proof power of the shower room and ensure that the self-explosion rate of the shower room is close to zero. This development will definitely revolutionize the shower room industry.

Zhongshan City Aona Sanitary Ware **** has applied for a patent for this technology, and it will take at least 10 years for the shower room industry to universally use this explosion-proof technology.

The glass glue under the shower room can open an opening, because the floor drain of the shower room is the lowest point, and the outside is high and the water outside is less after all, so it is simple, convenient and beautiful. Personal insights.

If there is a noodle pool, you can make a trough to introduce the wastewater from bathing into the water under the noodle pool.

The best thing to do is to re-open the hole to make a floor drain. Beautiful, functional and with no after-effects.

How did the landlord solve the same problem? Will the water come out when you open a hole and take a bath?

Please draw a sketch of the bathroom and give you suggestions based on the sketch!

Floor drains are an essential part of the shower's bend area, which effectively drains this disturbance and prevents the flow of water from remaining on the floor, thus keeping the bathroom clean and dry. If the floor drain is not properly positioned, it can affect the shower area, and if the floor drain is underneath the shower area, it may cause the water to flow around the floor drain instead of draining smoothly.

Here are some ways to fix the problem of floor drain under the shower area:

1.Replace the location of the floor drain.

If the floor drain has already been installed under the shower area, you may want to consider replacing its location. A professional installer can be hired to assess the location of the new floor drain to ensure that they meet safety and performance requirements.

2.Replace the floor drain type.

Another way to solve the problem of floor drains underneath the shower area is to purchase a different type of floor drain. For example, side-pull or in-line floor drains can be purchased, which can prevent water from accumulating around the floor drain.

3.Install a waterproof layer.

Installing a waterproofing layer on the ground is also a good solution. This will prevent water from seeping into the ground, which can lead to water seepage around the floor drain. If you're not sure how to properly install the waterproofing layer, refer to the advice of a professional.

4.Install floor drain for transverse extension.

If the uneven angle of the floor is the main cause of the wrong construction of the floor drain under the shower area, you may consider adding a laterally extending floor drain that will drain over a larger area to ensure that the flow of water does not remain on the ground.

In conclusion, the problem of a floor drain underneath the shower area can cause the bathroom to become unhygienic and dangerous. However, there are many workarounds available, so you don't have to worry too much. If you are confused about something, don't hesitate to ask for professional advice.