How should I install an exposed mixing valve?

Because in the commercial house, the kitchen area is very limited, and the kitchen things and types, is also the most, we often need bottles and cans, or a variety of seasonings, or other stocking when using the kitchen, then these things in the kitchen, if there is no suitable cabinet for storage, these things will be placed in a mess. Generally speaking, the installation hammer and kitchen decoration are one and the same. So don't wait until the renovation is complete before buying cabinets for installation.

Before decoration, the cabinet manufacturer should be asked to measure, determine the cabinet style and model, reserve the pipeline interface and the corresponding space, and then decorate, and finally ask the cabinet manufacturer to enter the construction.

marble countertops with the same defects. It is said that the application is to make full use of every corner according to the location of your kitchen, which can only be completed by professional designers, such as our company at least three sets of plans for customers to choose, humanized design. Cabinet installation is an important part of the decoration process, the cabinet installation is over, the kitchen will have a new look, which also means that the decoration of the home is nearing the end.

A kitchen cabinet includes upper and lower cabinets, as well as the installation of various hardware, and even the installation of electrical appliances, so to install a beautiful and satisfactory kitchen, to achieve the desired effect, first understand the installation process, so as to know in your heart, and avoid being fooled by unscrupulous merchants.

Should the bottom of the cabinet be left 10 cm empty? This is a problem that I have been struggling with recently, before my neighbor persuaded me not to leave the bottom of the cabinet empty, the kitchen is often used, the smoke is heavy and dusty, and the empty place is easy to accumulate dust, so his house is not empty. I also asked the master who renovated my home, and the master said that it was necessary to leave the bottom of the cabinet empty, otherwise it would suffer a big loss later.

In fact, this is the wrong idea, because the most important work is the later installation, the cabinet belongs to the high-end customized products, if there is a mistake, it will not only affect our use but also affect the service life of the cabinet, so how to install the cabinet? So today I will share with you some details of cabinet installation.

You only need to glue the tubes together, but the effect of surface-mounted may not be so good-looking, because surface-mounted will look particularly ugly.

I suggest that you do not have to cover it up, because it doesn't look that good, and you can choose to cover it.

You want to connect the two pipes together and control them through a uniform valve.

Before installation, attention should be paid to cleaning the pipeline first, cleaning the debris in the pipeline to prevent the mixing valve from clogging. Regularly clean the filter when clogged with dust and other debris, affecting the flow of water in and out, and clean areas with poor water quality at least once a month.

Before installation, try to achieve a balance of hot and cold water pressure. The differential pressure should not exceed 1 kg (. It is directly related to the blending effect and water output. If the pressure difference is too large, the pressure reducing valve can be installed on the high pressure side. Or add a booster valve on the low pressure side.

When the pressure difference between cold and hot water exceeds 8:1, a flow-limiting pressure reducing valve should be installed on the side with high pressure to ensure that the mixing valve can be adjusted normally. When selecting and installing the solar water mixing valve, pay attention to whether the nominal pressure, water mixing temperature range and other requirements are consistent with the product parameters.

During the installation of the mixing valve, you must see the label, the red mark is the hot water inlet, the blue mark is the cold water inlet, pay attention to the cold water inlet must be distinguished. After setting the temperature of the solar mixing valve, if the water temperature and pressure change, the outlet temperature change value is 2. If the pressure of hot and cold water is inconsistent, a one-way check valve should be installed at the water inlet to prevent cold and hot water from being connected to each other.

Water heater mixing valve purchase points:

1. The weight of the water valve.

When choosing, pay attention not to buy too light electric water heater mixing valve, too light is mainly because the manufacturer hollows out the internal copper in order to reduce costs, the electric water heater mixing valve looks very large, not heavy to pick up, it is easier to withstand the water pressure burst. The normal manufacturer's factory alloy mixing valve is about 230g.

2. Water valve handle.

Composite faucets are simple to use, as only one hand is usually empty when using the sink.

3. Water valve material.

Stainless steel is hygienic and environmentally friendly. Chromium branding equipment is easy to care for and harmless to people, but there are other elements that need to be added to the manufacturing process. So it is necessary to pay attention to what materials the equipment is made of, not all countries have such high standards as Germany.

The mixing valve is used to control the entry and exit of hot and cold water, and now it is widely used from door to door. So how do you install a mixing valve? How to install a mixing valve with a longer service life?

We'll teach you belowMixing valve installationMethod, friends who want to change the mixing valve at home should practice it themselves.

How to install the mixing valve?

1. Installation method of kitchen mixing valve:

The installation of the kitchen mixing valve is required to be firm, because the kitchen mixing valve is used very frequently, and it is easy to loosen after being used for a long time, so the nut of the mixing valve must be tightened. Now there are some flutter hall mixing valves on the market that are fixed with a solenoid and a large nut, which has a good stability effect and may be a popular trend in the future.

2. Installation method of bathroom mixing valve:

The installation of bathroom mixing valves generally requires the valve core of the mixing valve to be embedded in the wall. The thickness of the bathroom wall must be considered before embedding, if the wall is too thin, the valve core will not be able to be buried. Do not remove the plastic protective cover that comes with the valve core prematurely when it is buried, so as not to damage the valve core with cement and other chores during the embedding.

In addition, when the valve core is embedded, you should also pay attention to the direction of the valve core to avoid the wrong valve core. If there is a deviation in the size of the bathroom mixing valve when the inlet pipe is embedded, it can be corrected with an adjustable abductor.

3. Installation method of basin mixing valve:

When installing the basin mixing valve, a special angle valve must be selected, and the angle valve must be fixed with the hot and cold water pipe of the outlet. When you find that there is a distance between the upper water pipe of the smile angle valve and the mixing valve, you need to buy an extension pipe to connect it. Remember not to use other water pipes to connect, because if the water pressure is high, it is easy to cause water to fall off or leak.

If the inlet pipe is too long and exceeds the outlet pipe, you can cut off the part as needed, and if the angle is not suitable, you can bend it moderately to the desired position as needed. When installing a basin to drain the water, don't forget to buy a small connector for the faucet. Don't forget to flush the water pipes buried in the wall before installing the mixing valve.

4. Installation method of constant temperature mixing valve:

Before installing the thermostatic mixing valve, please check whether the water pipe is hot on the left and cold on the right, and remember not to connect the hot and cold water pipes to avoid the faucet not working properly. Note that solar water heaters and gas water heaters should not use thermostatic mixing valves because the water pressure is too low. When installing a thermostatic mixing valve, don't forget to install a hot and cold water filter.

The above is for you, how to install the mixing valve? The whole content of the mixing valve installation method.

1. How to install the mixing valve - bathroom:

Once you have purchased a shower mixer, you can choose the right height for the drain. The spacing of hot and cold water pipes must reach 15 cm. Don't forget to rinse the water pipes before installation, so as not to damage the mixing valve due to the water quality.

Installed shower bathtub mixing valve: After purchasing a concealed mixing valve, the valve core of the mixing valve should be embedded in the wall. Be sure to pay attention to the thickness of the bathroom wall before embedding.

If the wall is too thin, the spool will not be able to be buried. Do not easily remove the plastic protective cover of the valve core when it is buried, so as not to damage the valve core with cement and other chores during the embedding.

In addition, when the valve core is embedded, you should also pay attention to the direction of the valve core up and down, left and right, so as to avoid the valve core being buried wrong. If there is a deviation in the size of the wall-mounted mixing valve when the water inlet pipe is embedded, it can be adjusted with an adjustable crutch for calibration.

2. How to install the mixing valve - wash basin:

When buying a single-handle basin mixing valve, you should pay attention to the diameter of the water outlet, most of the water inlets on the market now belong to hard pipes, so you should pay attention to the height of the reserved water inlet, and 35 minutes down from the basin is the most suitable. When installing, a special angle valve must be selected, and the angle valve must be fixed with the cold and hot water pipe of the wall outlet.

When you find that there is a distance between the upper water pipe of the angle valve and the mixing valve, go and buy a special hose to connect it with an extension pipe. Remember that there is no flush, and you must not use other water pipes to connect, because if the water pressure is high, it is easy to fall off, leak, and cause you losses.

If the inlet pipe is too long and exceeds the outlet pipe, you can cut off the part according to your needs, and if the angle is not suitable, you can bend it moderately to the position you need as needed. Remember: don't bend hard to 90 degrees or more.

When installing a basin drain, don't forget to buy a small connection to the faucet (mixing valve shorted). Don't forget to rinse the water pipes buried in the wall before you install them.

3. How to install the mixing valve - solar energy:

First of all, it is necessary to confirm the installation type of solar mixing valve, when installing ordinary mixing valves, it can be installed without following the cold and hot signs, but if it is a constant temperature mixing valve, it must be installed according to the cold and hot signs.

In daily life, most of the solar mixing valves are thermostatic mixing valves, and the outlet of the solar mixing valve is equipped with a heat-sensitive temperature component, and the water temperature change can make the heat-sensitive component expand or shrink to control the movement of the valve core in the valve, block or open the cold and hot water inlet. When the temperature adjustment knob is set to the appropriate temperature, the solar water mixing valve adjusts the proportion of hot and cold water entering the water outlet to keep the water temperature constant at all times.

4. How to install the mixing valve--thermostatic water valve:

Before installing the thermostatic mixing valve, please check whether the water pipe is hot on the left and cold on the right, and remember not to connect the hot and cold water pipes incorrectly, so as not to prevent the faucet from working properly. Gas and solar water heaters cannot use thermostatic mixing valves because the water pressure is too low. Install a thermostatic mixing valve, and don't forget to install a hot and cold water filter.

A mixing valve is a device used to mix hot and cold water, and is often used in bathrooms, kitchens, and other places. It can adjust the water temperature and water pressure according to the needs, so that people can enjoy a comfortable bathing and living experience. This article will introduce the installation steps and precautions of the mixing valve.

1. Preparations.

Wrench. Water pipe cutter.

Pipe glue. Sealant.

Screwdriver. Second, the installation steps.

1. Close the water supply pipeline.

Before installing a mixing valve, the water supply line must be closed and the water pipe emptied. This avoids damage and damage caused by water flows.

2. Select the installation location of the mixing valve.

The mixing valve should be placed near the shower, bathtub or sink for easy access. At the same time, it should be ensured that there is sufficient space around the mixing valve for easy adjustment and maintenance.

3. Install the main body of the mixing valve.

Install the main body of the mixing valve to the wall and fix it with screws. At this time, it is necessary to select the appropriate mounting hole according to the model and size of the mixing valve, and ensure that the main body of the mixing valve is installed firmly.

4. Connect the water pipe.

Connect the water pipe fitting to the mixer valve body, and then connect the water pipe to the water supply line. When connecting water pipes, make sure that the water pipe joints are sealed with sealant and tightened with a wrench.

5. Adjust the mixing valve.

After installing the mixing valve, the mixing valve needs to be adjusted to achieve the water temperature and pressure required by the user. First of all, open the water pipe and check the working status of the mixing valve. Then, adjust the temperature and water pressure of the mixing valve as needed to achieve the right water temperature and water pressure.

6. Install the mixing valve panel.

Installing the mixer panel is the final step. Install the mixer panel to the mixer valve body and secure it with screws. At this point, it is necessary to ensure that the mixer panel fits snugly into the mixer body.

3. Precautions.

1. Before installing the mixing valve, read the installation instructions of the mixing valve to understand the installation methods and precautions of the mixing valve.

2. In the process of installing the mixing valve, we must pay attention to safety, and ensure that all interfaces are firm and reliable to avoid water leakage and electricity leakage.

3. When connecting the water pipe, the appropriate sealant and pipe glue should be used to ensure that the pipe joint does not leak.

4. When adjusting the mixing valve, the water temperature and water pressure should be adjusted appropriately according to the needs to avoid scalding and excessive water pressure.

Installing a mixing valve requires careful and careful operation to ensure safety and reliability. Only in this way can the mixing valve play its best role and bring people a comfortable living experience.

The development of the bathroom industry in today's is relatively rapid, because young people are now yearning for the metropolis, and if you want to find a sense of belonging in the metropolis, you must settle a home here, a home of your own, so there are more and more people who buy houses in the metropolis. In the decoration of the house, it involves the installation of bathroom products, and the surface-mounted shower mixing valve is a must-have product in our shower process, so we must also choose carefully. After the purchase, it comes to how to install, let's take a look at how to install the surface-mounted shower mixing valve and some matters that should be paid attention to when installing the trapped pin.

Exposed Shower Mixing Valve - Installation Steps

1. Before installing the surface-mounted shower mixing valve, please open the water source, remove the impurities and sand particles in the pipe, and then close the water source, the main purpose is to prevent the mixing valve from being installed, if there are impurities in the water pipe and the water supply can not be supplied normally, then it is quite troublesome to rework and install again.

2. Lock the flange cover of the surface-mounted shower mixing valve into the teeth of the water inlet elbow, then wrap the teeth with the anti-discharge belt, lock it into the wall piping, adjust the hot and cold water inlet elbow, rotate the angle to be flush and the hole spacing is the same as the ruler of the hot and cold water inlet hole distance of the body, and then rotate the flange cover to the wall, mainly to play a fixed role.

3. Put the rubber gasket of the surface-mounted shower mixing valve into the connecting nut of the hot and cold water inlet of the body, and then connect and lock it with the elbow of the hot and cold water inlet, please use a 30mm wrench.

Exposed Shower Mixing Valve - Installation Precautions

1. Before installing the open-mounted shower mixing valve, it is necessary to confirm that the water pressure is in between, so as to ensure that the water supply of the mixing valve is normal after installation.

2. Before disassembling the body of the surface-mounted shower mixing valve, please close the water inlet elbow (water source) and disassemble it carefully to prevent damage to the mixing valve.

3. Do not touch the water outlet when using the surface-mounted shower mixing valve to prevent scalding.

4. Do not disassemble the clamp shaft during the use of the surface-mounted shower mixing valve.

5. When cleaning and maintaining the surface-mounted shower mixing valve, do not use corrosive detergents to clean, avoid brushing with vegetable melon cloth or decontamination powder, so as not to damage the surface of the product and affect the service life.

Through the detailed introduction to you above, I believe you should have a clear understanding of the installation of the surface-mounted shower mixing valve. If you don't understand very well but are curious and want to try it yourself, you might as well install an exposed shower mixing valve in the bathroom and try it, follow the steps introduced above, I believe you will soon master it. Of course, we should also pay attention to some of the precautions mentioned above when installing, and strive to be able to install it at one time.

You can get it for free