What soil is best for anthurium cultivation, and what soil is used for anthurium cultivation

1) First of all, it is loose and breathable. Think about it, planting in soft, well-ventilated soil, the plant can breathe freely and grow better.

2) Then there's nutrition. The roots of the plant mainly absorb nutrients from the soil. If you want to make the subsequent maintenance without too much effort, it is necessary to choose a nutrient-rich soil.

3) The third point is the degree of acidity and alkalinity. Specifically, this plant is more suitable for growing in acidic soils. However, it should be noted that weak acid is fine, not too much.

4) There is also good water retention and fertilizer retention. This requirement is also of great significance for promoting the growth and development of the plant in the future.

5) Then it is clean and hygienic and does not contain toxic substances. If you are not at ease, you can sterilize it before cultivating. It's not troublesome, just expose yourself to the sun.

6) The last point is that the drainage should be good, and the water should not be allowed to accumulate.

Prepare the soil. 1) The first option is to mix peat soil, particles of broken bricks, and coarse grain bran. Its ratio is controlled at a volume ratio of four to two to four.

2) The second option is a mixture of humus (delicate), crushed red brick particles, and wheat husk (preferably damp and rotten). Their ratio is also four to two to four. This preparation method is basically the same as the first one, and the effect is not very different.

3) It can also be mixed with coconut peat and perlite. However, the former should account for 95 percent of the volume, and the latter should account for 5 percent.

4) Mix peaty soil with humus and add an appropriate amount of bone meal (which is rich in phosphate fertilizer), which is also fine. As for the ratio, it can be four to four to two.

Anthurium with clay. Anthurium must be grown on a well-drained soil substrate, generally made from a mixture of peat, perlite and sand, and the pH value should be kept between, with an acidic environment that is more conducive to its growth.

Anthurium with plain soil.

Anthurium can also be used with ordinary soil, anthurium is a fleshy root, planting soil can not be compacted, it is best to add humus soil and sediment.

Anthurium with pine needles soil.

Anthurium can be planted with pine needles, but it should be sterilized with high temperature before use, scalded with boiling water, or exposed to strong light. If it is collected in the wild, it needs to be fermented and rotted before use, and the appropriate use of old base can improve the air permeability and drainage of the soil, which is more conducive to growth.

Anthurium can be grown in nutritious soil.

Anthurium can be planted on nutrient soil, although the number of flowering is small, but the number of flowering is large, but the flowering time is long, so the demand for nutrients is also high, and it needs to be planted with nutrient soil to continuously provide nutrients and promote long-leaf flowering.

What planting material is used for anthurium.

It is recommended to highlight the drainage of anthurium, so that the water can be discharged to the soil in time after each watering. When using mixed data, it is recommended to pad granular planting material at the bottom of the pot, and the planting material should use mixed data, (3 parts of honeycomb pulverized coal + 3 parts of humus + 3 parts of freshwater sand + 1 part of coconut peat) and other planting materials are fine, can be rooted and fit, and the drainage is also better.

Anthurium soil mixing method.

Anthurium soil can generally be mixed with humus soil, sandy soil, and garden soil in a ratio of 1:1:1, and garden soil can be the topsoil of vegetable gardens, orchards and other places.

Weakly acidic, good air permeability, high nutrient content of flower soil.

It is best to use flower soil with weak acidity, good air permeability and high nutrient content for cultivating anthurium. Specifically, it can be made by adding a small amount of perlite to cocoir; It can also be made by mixing two parts peat, two parts coarse grain bran, and one part brick grain; It can also be made from a mixture of two parts peat, two parts humus, and one part bone meal.

Anthurium soil mixing method.

Anthurium can be purchased directly from other people's prepared special soil, or it can be prepared at home. There are many ways to prepare, which can be prepared with peat, peat, perlite, humus, broken red bricks, wheat husks, and can also be mixed with peat, broken bricks, and coarse grain bran. After preparation, a small amount of bone meal can be added or mixed with a certain amount of base fertilizer to provide good nutrition.

After the soil is configured, disinfect and sterilize first, then prepare a flower pot of moderate size, spread broken tiles at the bottom of the flower pot, fill the soil into it, and then prune the anthurium properly, and then plant it in the flower pot, do a good job of later maintenance, and promote the anthurium to adapt as soon as possible.

Anthurium can grow better in soft, breathable, draining slightly acidic soil, but also needs the soil to provide nutrients in a timely manner, each time the soil can be prepared to add an appropriate amount of river sand, sulfur, or pine needles and other substances to the soil, usually can be used as a substrate mixed with humus, river sand, sulfur, etc., can make the anthurium grow better.

The roots of Anthurium are more developed, and the requirements for soil are not the same, each time you cultivate Anthurium, you need to choose the soil suitable for growth as a substrate, so what soil is best for Anthurium cultivation, it generally needs to grow in soft, breathable, and draining soil, and we can add some river sand to the prepared soil.

Anthurium has strict requirements for soil, if it is not cultivated in the soil suitable for growth, the leaves are easy to lose color, it not only needs a soft, well-ventilated substrate, but also the soil can provide it with sufficient nutrients in a timely manner.

Each plant has different needs for soil acidity and alkalinity, and anthurium in the slightly alkaline soil, can make it grow better, usually in the preparation of soil, you can add some sulfur or pine needles to the soil in an appropriate amount, can increase the acidity of the soil, and the maintenance process can also be used to ferment rice water instead of fertilizer, so that it can grow better.

If you want to cultivate anthurium in pots, then we can use humus, river sand, and sulfur (pine needles) to mix it in a ratio of 5:3:2 as a substrate, or we can use garden soil, river sand, and pine needles according to 3:

Mix in a ratio of 1:1, and add some well-rotted organic fertilizer as a substrate.

Anthurium with clay. Anthurium cultivation must be based on well-drained soil, generally with peat, perlite, sand, etc. The pH should be kept in between, and an acidic environment is more conducive to its growth.

Anthurium with plain soil.

Anthurium can also be used with ordinary soil. Anthurium is a fleshy root, and the soil should not be compacted. It is better to add humus and silt.

Anthurium with pine needles soil.

Anthurium can be planted with pine needle soil, but it should be sterilized at high temperature before use, scalded with boiling water, or irradiated with strong light. If it is collected in the wild, it needs to be fermented and decomposed before use. Proper use can improve the air permeability and drainage of the soil, which is more conducive to the growth of the soil.

Anthurium can be grown in nutritious soil.

Anthurium can be grown on nutrient soil. Anthurium flowers less, but many times, it takes a long time to flower, so it needs to be planted in nutrient soil so that it can provide nutrients continuously and promote long-leaf flowering.

What planting material is used for anthurium.

It is recommended to plant anthurium to drain prominently, and to drain the water out of the soil in time after each watering. When using mixed data, it is recommended to pad granular planting material at the bottom of the pot, and use mixed data for planting materials. Honeycomb pulverized coal, humus, freshwater sand, coconut peat and other planting materials.

It is very fine and can attach to a root and drains well.

Anthurium soil mixing method.

Anthurium soil can generally be prepared by mixing humus, sandy soil and garden soil in a ratio of 111. Garden soil can be topsoil in vegetable gardens, orchards, etc.

To change the pot of anthurium, choose these "4 kinds" with soil, and raise the leaves as big as a palm.