How to remove the roots of the tree, and how to rot the roots quickly?

Tree root removal techniques

1. Drill holes in tree heads and fill herbicides (not environmentally friendly).

2. Put the head of the tree horizontally, fill it with thick plastic tape, put the mouth on the tree, and tie it tightly with retractable tape, so that the salt juice will penetrate and make it die and rot, which is more environmentally friendly.

3. In winter, sweep away the dead branches, fallen leaves, and diseased fruits in the garden and take them out of the garden to burn. with kilograms of ash, sulfur powder.

kilograms, kilograms of salt, kilograms of vegetable oil, and 50 kilograms of water are prepared as whitening agents for whitening of the trunk in winter.

Caring skills. 1. Deep ploughing of the soil, when the walnut is harvested and before the leaves fall, the soil is turned deeply, the soil is matured, the root development is promoted, and the absorption function is improved, and the depth of deep ploughing is 20-30 cm.

2. Apply sufficient fertilizer, combine deep ploughing and apply 150-200 kg of well-rotted organic fertilizer to each adult tree, and apply nitrogen, phosphorus and potassium compound fertilizer once in June and July.

3. Timely irrigation can promote the healthy growth of the tree and improve the ability to resist diseases.

Quickly remove tree roots.

1. Drill holes in tree heads and fill herbicides (not environmentally friendly).

2--Put the head of the tree horizontally, put a kilogram of salt in thick plastic tape, put the mouth on the head of the tree, and tie it tightly with a retractable plastic bag, the salt juice will penetrate and make it die and rot, which is more environmentally friendly.

Look at the roots, we're all pulling them up with small tractors here.

A quick way to decay tree roots.

It can be rinsed directly with sulfuric acid solution. Go to a pesticide store and buy a bottle of herbicide and pour glyphosate directly around the roots of the tree, and over time, the tree will rot. You can also often apply a lot of fertilizer around the roots of the tree, and the roots will rot and wither.

A method of removing rotten parts from the roots of old trees.

You can use the mother liquor of the tree protector to irrigate the roots, prevent and control airborne diseases, disinfect the plants, gently scratch the trunk with a blade on the skin of the disease, and brush the mother liquor of the tree protector, which can make the first dry and fall off.

Keep the cultivation environment dry, and pay attention to the disinfection of the cultivation medium and site. After the semi-finished products are unloaded from the cabinet to the work shed, the head of the fortune tree is sprayed with Sukrin to prevent the harm of gray mold. Before planting, use a sharp knife to cut off the sprained and decaying tissue at the top of the taproot, and then spray Sukrin on the wound.

A way to prevent root rot from tree roots.

1. Sludge prevention and control.

Take fresh soil and mix it with water, the degree of wetness is that the hand is kneaded into a ball to adhere to the bark, apply 3 5 cm on the scar of the fruit tree, and then wrap it tightly with plastic film to prevent evaporation and soil shedding. After 1 year, the plastic film and mud are removed. In this way, the good gas germs will suffocate and die due to long-term lack of oxygen.

The rate of this method is more than 90%.

2. Alkaline water impregnation.

Edible alkali and water are prepared into an alkali solution in a ratio of 1 5. Scrape the scar and use a small brush to fully apply alkaline water to the scar wound, about 5 cm beyond the scar, so that the alkali solution can be fully impregnated into the bark. Then, wrap it tightly with plastic film.

After 10 days, it will be done again, and the plastic film will be lifted after half a year. The rate of this method is more than 85%.

3. Sterilization of garlic liquid.

Mash the garlic into garlic puree and add 10% salt water in a ratio of 1 to 1 to prepare a garlic liquid. When using, first scrape the scar, and use a small brush or brush to apply garlic liquid to the scar wound, and the surrounding area should exceed the scar 3 5 cm. Apply 1 more time after 10 days.

The rate of this method can reach more than 95%.

1. The use of paraquat herbicides, which can effectively kill the leaves of weeds, plants cannot photosynthesize without leaves, and weeds will soon die and rot. 2. Pull up the weeds first, pile the weeds in a pit, and then cover them with straw or film, and during fermentation, the weeds will rot quickly.

Hello, I used to plant a row of poplars in front of my house, but although the trees were cut down, the roots remained in the soil. The poplar tree is particularly vigorous, and in addition to the fact that a few small trees do not grow from the previous stump, poplar trees also grow under the walls and tiles in the yard, which is very annoying. Later, when he heard from his neighbor that he could kill the roots by irrigating them with useless oil, my father dug a deep trench around the stump and poured a circle of waste engine oil, and it didn't take long for the poplar tree to die and no more poplar trees grew.

Although the roots can be killed by irrigating them with oil, they are a bit polluting to the environment, and the most environmentally friendly and effective way is to water the roots with a high concentration of salt water, which can also kill the roots. Boil a pot of boiling water in a pot, put in a lot of edible salt, the more edible salt, the better, until the salt can not be dissolved in water, pour it on the roots while it is hot, and use high concentration of salt water to quickly dehydrate the roots and achieve the purpose of killing the roots. In addition to the rapid dehydration of tree roots, in addition to concentrated salt water, high-concentration urea water can also be used to kill tree roots.

In addition to using engine oil and highly concentrated brine, quicklime can also be used to burn tree roots, which is a more cumbersome method. Sprinkle quicklime in pits at and around the taproot of the roots, then cover them with soil and pour an appropriate amount of water over them. When quicklime comes into contact with water, it generates a lot of heat, which is enough to burn the roots of the tree.

The above three methods can burn tree roots, I hope it will help you.

For sawn off trees, you can water the roots with boiling water, and watering them several times can remove the root system. In order to prevent the roots from continuing to sprout and grow, the roots can also be removed with salt, which is very dense and can be watered with salt water, or the appropriate amount of salt can be buried in the root part of the plant. Smaller trees, which can be manually rooted, can be dug up.

The growth ability of trees is very strong, after sawing off the trees, if you don't want the trees to continue to grow, you can use boiling water to irrigate the root system of the trees, which can cut off the trees. Boiling water is poured over the root system of the tree, which can be watered several times in a row to remove the root system. In a high temperature environment, the root system of the tree is damaged, and it will lose its ability to grow, and it will die later.

Most trees are not tolerant to salinity, and after sawing off the trees, they can be eradicated with salt. In the root part of the plant, water the salt water, depending on the size of the tree, use the appropriate amount of salt, generally 2 3 bags of salt, you can dispose of 1 tree. After digging up the soil at the roots of the tree and exposing the root system of the tree, an appropriate amount of salt can be poured over the root of the tree.

If it is a smaller tree, it can be manually removed after being sawn off. Using a tool such as a shovel, the soil at the roots of the tree is chiseled open and the roots of the plant are dug out and burned. After digging out the roots, the roots of the tree can also be cut off, and after the root system is cut off, the tree will not be able to survive.

After the roots of the tree have been removed, the soil pit should be filled.

Dead trees and old trees have weak growth ability, unsightly appearance, and easy to induce pests and diseases, so they need to be sawed off, which is conducive to the growth of other trees. Trees are not tolerant to high temperatures, and after being sawn off, an appropriate amount of diesel fuel can be poured into the root system of the planted tree, which can burn the roots to death. If the trees in the yard interfere with travel, do not saw them off, but transplant them.

The soil at the roots can be dug up to allow the remaining roots to be fully exposed to the air.

You can pile up rotten leaves, trees, and branches, that is, those that have turned brown in color, and crumble at the touch of them, and spray them with water, and cover them with plastic sheets.

The sulfuric acid solution can be poured directly. You can use the mother liquor of the tree protector to irrigate the roots, prevent and control airborne diseases, disinfect the plants, gently scratch the trunk with a blade on the diseased skin, and apply the mother liquor of the tree protector with a brush, which can dry up and fall off the diseased skin.

Usage:

First of all, you can use rotten wood as a pot to grow succulent plants. Although the rotten wood is a little broken, it is also very good to use as a flower pot.

Then there is the idea of making a work of art from rotten wood and hanging it on the wall, which is also a different kind of scenery, which is perfect for those who love art.

The second is to polish the rotten wood into such a light holder. The light stock is made of wood, and the candle is combined with the light stock made of rotten wood, so that it looks more coordinated.

Then let the rotten wood grow some moss and some small plants directly, so that it can also be used as decorations, and it looks extremely good.

Then there's the art that can be used to make a large animal series. Of course, not just elephants, but also many animals.

The roots can rot in situ, which can be directly rinsed with sulfuric acid solution; Also go to the pesticide store and buy a bottle of herbicide.

Place glyphosate. Fall directly around the roots of the tree, and over time, the tree will rot. Or you can often apply a lot of fertilizer around the roots of the tree, and the roots will rot and wither.

After the roots rot, you can irrigate the roots with the mother liquor of the tree protector to prevent and control airborne diseases, disinfect the plants, gently scratch the trunk with a blade on the skin of the disease, and brush the mother liquor of the tree protector, which can dry and fall off.

Keep the cultivation environment dry, and pay attention to the disinfection of the cultivation medium and site. After the semi-finished products are unloaded from the cabinet to the work shed, they are sprayed with Sukring.

head, to prevent the harm of gray mold. Before planting, use a sharp knife to sprain the top of the taproot.

and the decaying tissue is cut off, and then Sukrin is sprayed on the wound.

Methods of digging up tree roots.

When digging the roots of the tree manually, you must have handy tools, such as pickaxes and shovels.

Axe. First, use a shovel and pickaxe to dig out the soil around the roots, and after seeing the outline of the entire root, use an axe to cut off the roots.

You can then use an iron pickaxe to warp the entire root out of the pit, but the large roots are still very heavy, so it is faster to do it mechanically.

Summary. How do you remove tree roots quickly? If you dig with people, it is still more laborious.

The general manual digging with shovels, hoes are more troublesome and laborious. I think it is very convenient and fast for people to dig tree roots with machines nowadays. It's like that excavator.

1. You can dig up a lot of roots in half an hour.

How do you remove tree roots quickly? If you dig with people, it is still more laborious. The general manual digging with shovels, hoes are more troublesome and laborious.

I think it is very convenient and fast for people to dig tree roots with machines nowadays. It's like that excavator. 1. You can dig up a lot of roots in half an hour.

If the disease is found, remove the root of the disease in time. For the whole rotten root, it is necessary to cut off the root and carefully scrape the diseased part until the diseased root is dug up; Disinfect with 1% 2% copper sulfate solution, or use 40% pentachloronitrobenzene powder to prepare 1:50 medicinal soil, mix well and apply to the roots, so as to prevent the roots from remaining sick.

Water the trees with thick salt water. Concentrated brine has a high osmotic pressure, if the concentrated brine is poured along the perimeter of the tree, the cytoplasm of the root cells of the tree will be quickly dehydrated, the roots of the tree will rot, the leaves will turn yellow in 3 days, and the tree will die in 10 days. Salt is available in every household, and it is also very cheap, in order to improve the effect, you can use boiling concentrated salt water to pour it down, and the roots of the big tree will rot quickly.

The roots of large trees are organs that absorb water and nutrients, and rotting the roots of large trees can cause the rapid death of large trees. When the tree is drenched in thick salt water, the soil around the tree becomes salinized and unsuitable for plant growth when it does not rain.

If the tree has been cut down and a stump is left, we just need to expose the surface of the stump with fresh or noisy openings, and then sprinkle table salt on the cross-section of the stump, and then wrap it in a plastic bag, and after pressing it with earth, the roots of the tree will also die quickly. Generally, the master of sawing trees will use this method to kill the roots.