Ping Pong racket has two sides, which side of the table tennis racket is the front

Positive rubber, raw rubber, or long rubber.

The side of the table tennis racket with a sign is the front, and the side without the sign is the back. The table tennis racket consists of three parts: a base plate, a rubber and a sponge. The proper combination of the three determines the quality of a racket.

Table tennis racket shapeThe characteristics of the round racket are: the center of gravity of the ball is close to the racket handle, the resistance arm is short, the start is fast, the adjustment is flexible, and the control is stable.

The characteristics of the square racket are: the center of gravity of the shot is far away from the racket handle, the resistance arm is long, the acceleration is large, and the natural smash is more powerful.

Generally, the front and back hands of table tennis rackets can be distinguished from the sign on the handle, and the side with the sign is the front (the side without the sign is the back side). There are also some boards with printed words on the board, and the side with the printed words is the front (the one without the printed words is the reverse side). There are also some shoulders that are relatively close to the handle with a print, generally the model of the board, and this side is the front.

In fact, the front and back of the paddle are only relative, and most of the wood on the front and back of the paddle is exactly the same, so it depends on which side you use as your forehand. The red and black of the rubber cannot represent the front and back, and many players like to use black as a forehand. Generally, when the forehand and backhand rubber are different, most of the forehand rubber sponges are hard and have strong attack power; The backhand rubber sponge has low hardness and is easy to control.

After selecting the forehand and backhand, some people will also properly polish the shoulder pat position of the forehand according to their grip habits to have a better feel.

1. Table tennis rackets have their own advantages on both sides, mainly depending on personal habits.

2. The International Table Tennis Federation stipulates that the table tennis racket must be red and black (dark green) two bright colors to make identification, in the past, the two sides checked each other's rackets before the game, so that the other party knew what rubber surface was glued on both sides of your racket (divided into positive glue and reverse glue), so that the other party knew that you had that side to kick off when the ball was teed, and now the Table Tennis Federation stipulates that the positive glue is red and the reverse glue is black.

3. When serving, both sides know whether to spin or counterspin. Return the ball according to spin and attack power. The positive glue has strong attack power and slow rotation speed, and the reverse glue has a fast rotation speed and weak attack power.

The positive gel particles face outward, the surface of the plate is the particles, and the particles are in direct contact with the balls. The non-stick particles are facing inward, the surface of the plate is smooth, and the smooth surface is in direct contact with the ball.

2. The dribbling function is different

It is mostly used by most athletes who prefer to shoot straight and push for a right attack or a side attack. Since the height of the rubber particles is generally in between, the rubber not only has good stability when hitting the ball, but also has a large resilience, and is easy to play the role of a sponge and a base plate. This is good for increasing the speed and speed of the shot.

However, due to the small gel content of the colloid, the particles are relatively hard and lack viscosity, and the friction is much less than that of the anti-adhesive. The anti-sticking agent is usually controlled by pulling the ball, which is very soft and sticky because the rubber surface does not slide easily when in contact with the rubber surface, which is beneficial for increasing the spin of the ball.

The front of the table tennis racket is used with positive glue, and the reverse is used with reverse glue on the back side.

Positive rubber: Positive rubber is also called short particle rubber, which is characterized by good elasticity, fast speed, stable hitting, and no turning, which is suitable for fast attack near Taiwan, especially the left push and right attack type of play, which is one of the most commonly used rubber types for straight board fast attack players.

Anti-glue: Anti-glue is characterized by strong spin force, stable hitting and easy control, which is suitable for arc circle type or arc circle combined with fast attack type play. It is also the preferred type for beginners due to its stable hitting and good ball control.

The reverse sponge rubber is the most commonly used rubber for straight and horizontal players, almost 100% of European players use this kind of rubber, and nearly 80% of Asian players also use this kind of rubber. Because this kind of rubber is a good balance between speed and rotation requirements.

There is no difference between the front and back of the table tennis racket without viscose, and the material is the same as the workmanship. But there is a difference between the rubber and it must be red on one side and black on the other.

Reason: The rubber on both sides of the table tennis racket must be red and black, so that the athlete can judge the type of rubber of the opponent by color, so as to judge the nature of the ball. And the gloss of the attachment on the surface of the racket is within the specified range to prevent the opponent's vision from being affected during the game.

You have to turn the front and back sides to hit the ball, so the speed of hitting the ball is not as fast as a straight shot. The grip of table tennis with a straight grip or a horizontal grip is mainly divided into two types: straight grip and horizontal grip: straight grip is characterized by faster shots when hitting the ball, more flexible wrists, and one-sided offense; The horizontal grip is characterized by a larger range of care on both sides than a straight shot, which is conducive to the technique of attacking on both sides.

1. Straight grip method.

1) Fast-break type grip method.

There are three common grip methods for fast attack types (including left push, right attack and two-sided attack):

1 The right side of the racket handle is attached to the third joint of the index finger, and the second joint of the index finger is pressed against the right shoulder of the racket, the first joint of the index finger is naturally bent inward, and the first joint of the thumb is pressed against the left shoulder of the racket (the distance between the thumb and the index finger should be moderate). The other three fingers are naturally bent and overlapped, and the first knuckle of the middle finger is supported on the back of the racket to keep the racket stable.

With this grip method, the wrist is more flexible. You can use your wrist movements to send balls with similar movements but with different spins and landing points. It can also be very flexible to play diagonal and straight balls; It is also more beneficial to the handling of the ball in the table, from the backhand position to hit the ball with the backhand and then hit the ball from the forehand position, and from the backhand position with the backhand to hit the ball with the sideways forehand attack, which is conducive to the coordination and combination of the forehand and backhand two technical actions. For chasing the ball in the middle, the wrist can hang down naturally, and the racket shape can be adjusted through the wrist to make a reasonable counterattack to the incoming ball.

When using this grip method to attack the forehand, the thumb and middle finger are coordinated and forced, the index finger is relatively relaxed, the ring finger is slightly away from the middle finger, and the fingertip is gently supporting the back of the racket to maintain the stability of the racket when exerting force. When attacking or blocking the ball with a backhand, the index and middle fingers are used in a coordinated manner, and the thumb is relatively relaxed. When using the wrist to exert force (including forehand and backhand strokes), the middle finger is the main force, and the thumb and index finger keep the paddle shape stable, and at the same time use auxiliary force.

2 The grip method is basically the same as the first one, but the distance between the thumb and index finger is larger (the clamp shape is larger). This grip is good for the upper and forearm to concentrate the force. Therefore, the mid and far table attack, forehand attack, and smash ball are all more powerful.

However, due to the large distance between the thumb and index finger and the deep grip, it has a certain impact on the flexibility of the wrist, and it is very different for handling the ball in the table, spinning the ball, pushing and blocking the ball and chasing the ball.

3 Stick the right side of the handle on the index finger.

Between the second and third joints, press the left and right shoulders of the racket with the first joint of the thumb and index finger, the distance between the two fingers is moderate (but smaller than the first grip), hold the back of the racket on the left side of the first knuckle of the middle finger, and the ring finger and little finger are stacked obliquely under the middle finger, and use the ring finger to assist the middle finger to support the back of the racket to keep the racket stable.

This grip method is used by some players who attack on both sides, and its advantage is that when attacking the backhand, the forearm is lifted and the head is facing up, which is conducive to the high-pressure play of the backhand and makes the ball fast and powerful. This grip is more coordinated when attacking the ball in the middle because the racket shape sags when the hand is heavy. Because the distance between the thumb and index finger is small, the wrist is more flexible, so it is easy to handle the ball, and it is also good for assault and spin balls, but its disadvantage is that it is difficult to hit the ball with high pressure due to the drooping of the forehand ball.

At the same time, because the wrist is more flexible, the shape of the racket is not easy to fix.