HOW CAN YOU GET WINDOWS AFTER A BOOT

Start - Run - Enter "msconfig" in the "Open" box - OK - Open the System Configuration Utility - Select the "Startup" tab - Find the item that represents POCO, remove the previous "check mark", and finally "OK", this program will not open with the system after the computer restarts.

You take a look at the start menu under the Programs startup inside to see if there is it.

If you have one, just delete it.

If you don't use msconfig, open a dialog box with the start item, and cancel the check mark of the program you don't want to run when you boot it.

Then decide to restart.

What's your system? 98 and xp use the startup item in msconfig to find the corresponding program and remove the checkmark, 2000 system can be optimized with optimization software, if you can use the registry it is simpler!

First, first look at whether there is anything in the startup, if there is, just delete it.

Second, enter msconfig in the runtime, find the startup items, remove all of them, and restart them!

Directly in the POCO settings, turn off the automatic start when booting up, and you're good to go.

Look for it in the startup item, if not, see what it is in the property of the poco that is not saidexe is in this way.

In msconfig, just turn off the startup item.

Run msconfig, remove what you don't want to run when you boot up, and restart.

You can use the Optimizer or Super Bunny settings to boot up and optimize it.

Like these software.

It's best to go into the software itself to modify it.

Summary. Kiss! To start Windows, we can follow the following process:

Step 1: We press the power button on the front panel of the main unit, and the computer starts to self-test.

Step 2: When the monitor says "Starting Windows."."Message: If you want to enter the win-dows operating system normally, you can wait; If you want to enter the DOS operating system, you should press the "F4" key immediately, and after entering the DOS operating system, the DOS prompt will be displayed; If you want to enter the multi-boot menu and choose the boot mode yourself, you should immediately press the "F8" key.

Step 3: When you start the system for the first time, the "Enter Windows Password" dialog box appears, in Windows 98 Me 2000, you can enter the password or not, if you don't enter the password for the first time, the "Enter Windows Password" dialog box will no longer appear when you start it later; In Chinese Windows XP, you must enter the username and password, then click OK or type enter, and you will enter the Windows operating system.

I sincerely wish you good health and all the best.

How do I boot Windows?

Kiss! To start Windows, we can follow the following process: Step 1:

We press the power button on the front panel of the main unit, and the computer starts to self-test. Step 2: When the monitor says "Starting Windows."."When informative:

If you want to enter the win-dows operating system normally, you can wait a while; If you want to enter the DOS operating system, you should press the "F4" key immediately, and after entering the DOS operating system, the DOS prompt will be displayed; If you want to enter the multi-boot menu and choose the boot mode yourself, you should immediately press the "F8" key. Step 3: When you start the system for the first time, the "Enter Windows Password" dialog box appears, in Windows 98 Me 2000, you can enter the password or not, if you don't enter the password for the first time, the "Enter Windows Password" dialog box will no longer appear when you start it later; In Chinese Windows XP, you must enter the username and password, then click OK or type enter, and you will enter the Windows operating system.

I sincerely wish you good health and all the best.

Hello, because seeing that you did not rate me last time, I am very concerned about your experience. If you are satisfied with my service, I hope you can give a thumbs up! If there is a problem, I am always waiting for you. I wish you a happy life and a happy life!

Lenovo notebook settings from the USB flash drive method:

When the computer is turned on, when the association screen appears, immediately press the F12 key at the same time, and the safest thing is to keep pressing the button.

2. After the previous step, the interface as shown below will appear. If the screen does not appear, you will need to restart your computer and continue as in the first step.

F12 is a quick entry to the startup item settings, inserted into the U disk, therefore, the following figure shows the boot from the hard disk, optical drive, U disk, press the up and down keys to select, and then press the enter key, you can enter.

Method 2: 1. This method is to enter the BIOS to set up.

When the computer is turned on, when the association screen appears, press the F2 key at the same time, the safest thing is to keep pressing the button.

2. After the previous step, the BIOS interface as shown below will appear. If the screen does not appear, you will need to restart your computer and continue as in the first step. Then press the left and right keys to select the "Boot" item.

3. In the "boot" item, there are three startup items, which is the order in which the computer boots successively, as long as the startup item that needs to be started is placed in the first item, after saving, you can start the item the next time you start the computer. There is a prompt on the right side of the specific operation: press the up and down keys to select the startup item, and press F5 or F6 to move the startup item up and down.

If you use the problem to make a well, if you start the technology from the USB disk, you can fix the billing machine, or you can use the PE to copy the file from the other computer to the prompted directory to start it, or you can only reinstall the system.

Tool: Lenovor9000K; Operating system: Windows 101, right-click the Start button and select the Run menu.

2. Next, enter the command in the open run window, and click the OK button to run the command.

3. Then find the service item in the service window that opens.

4. Double-click to open the property window of the service item, and click the start button.

5. Then select the automatic menu item in the type drop-down menu under the startup that opens.

Step 1: Press the power button on the front panel of the main unit and the computer will start self-testing.

Step 2: When the monitor says "Starting Windows."."Message: If you want to enter the win-dows operating system normally, you can wait; If you want to enter the DOS operating system, you should press the "F4" key immediately, and after entering the DOS operating system, the DOS prompt will be displayed; If you want to enter the multi-boot menu and choose the boot mode yourself, you should immediately press the "F8" key.

Step 3: When you start the system for the first time, the "Enter Windows Password" dialog box appears, in Windows 98 Me 2000, you can enter the password or not, if you don't enter the password for the first time, the "Enter Windows Password" dialog box will no longer appear when you start it later; In Chinese Windows XP, you must enter the username and password, then click OK or type enter, and you will enter the Windows operating system.

The relationship between people and work is based on self-knowledge. Through several years of work I discovered my personality traits: (omitted, played by myself).

My self-perception made me feel that I had made the right choice to become a civil servant. I'm an enterprising or accomplished person, and I don't like to be idle. I find it challenging to be a civil servant who has a lot of activities and can encounter different new problems, and I like to be challenged.

My work is relatively leisurely now, and although I can make up for it with a wide range of other hobbies, I don't feel satisfied with the process of work. I was taught a very traditional one since I was a child, I like to help others, and I admire the high spirits of the ancients. Civil servants have a wide range of social functions, and this position allows me to realize my social ideals, so I have a strong interest and passion for this work.

It is precisely for this reason that I would rather give up the high income of my current unit to apply for the civil service examination.

How to create a boot auto-start program in Windows 10:

1. Start by creating a shortcut to the app.

Find the application you want to add to the boot startup item, this article takes QQ as an example, in the QQ application, click the right->Send to-> desktop shortcut (you can also drag it directly to the desktop with the mouse).

2.Open File Explorer, go to the C drive, if there is no hidden folder displayed, then turn on the "Show Hidden Folder" option, and click "View" > in Explorer"Hidden items", tick it, as shown in the figure, and the programedata folder will be displayed.

3.Go to Table of Contents C: ProgramData, Microsoft Windows, Start Menu, Programs Startup

Cut (or copy) and paste the Step 1 application shortcut into this folder, and if an Access Denied dialog pops up, select Continue.

4.At this point, the application is added to the startup item, and the application will automatically start up the next time you restart your computer.

Go to Control Panel - Power Options - Select the function of the power button and find that the "Enable Fast Start" function item in the shutdown settings is missing.

How to enable and disable the "Enable Fast Startup" function on Windows 10.

How to enable the "Enable Fast Startup" function on the Windows 10 system:

Right-click Start on the system desktop, and left-click in the right-click menu: Command Prompt (Administrator);

In the open admin command prompt window, type: powercfg h on (enable windows hibernation) (note the space) command, press enter, there is no prompt, do not care about it, exit the admin command prompt window;

Right-click Start in the lower left corner of the system desktop, click Control Panel in the right-click menu, and left-click and double-click Power Options in the Control Panel.

In the power options window that opens, we click: Select the function of the power button;

In the system settings window, we can see that the "Enable Fast Startup" function item in the shutdown settings has been restored, because the Windows 10 system has turned off the Windows hibernation function, so the "Enable Fast Startup" function has also been turned off.

How to turn off the "Enable Fast Startup" feature in Windows 10.

Right-click [Start] in the lower left corner of the system desktop, click [Command Prompt (Administrator)] in the right-click menu, open the administrator command prompt window, enter: powercfg h off (close windows hibernation) (pay attention to the space) command, press enter, there is no prompt, leave it alone, exit the administrator command prompt window;

Right-click [Start] in the lower left corner of the system desktop, click [Control Panel] in the right-click menu, left-click and double-click [Power Options] - Select the function of the power button in the control panel, and the item "Enable Fast Startup" in the shutdown settings disappears.