-
Anonymous users2024-02-11A router with a normal interface.
1.You can connect the broadband cable to the routing WAN port, and use one network cable, one end to the computer, and one end to the routing 1, 2, 3 interface.
2.Open your computer browser and enter the router settings interface in the ** bar.
3.If you don't connect to the router, the broadband line is directly connected to the computer and you need broadband dial-up to access the Internet, the router selects ADSL dial-up for Internet access, if you don't need to dial up, you can select Auto Get for Internet access, click "Wireless Encryption" to set the 8-digit password and click OK.
4.Click "For other Internet access type settings, please click Advanced Settings" - Running Status - WAN Port Status to show that you can access the Internet when you are connected.
If it shows that the connection is being made, then you can clone the MAC address, click Advanced Settings - MAC Clone, Manually Clone - Clone MAC Address, and click OK if you see that the address does not start with C8:3A:35.
When cloning, you need to take a network cable to connect the computer to any one of the router 1 2 3 interfaces, do not connect the wireless signal of the router ).
5.Restart your router --- clicking System Tools.
After restarting, go to the advanced settings again to check the connection status, and it shows "Connected", then you can surf the Internet.
An easy-to-install router.
1.You can connect the broadband cable to the routing WAN port, and use one network cable, one end to the computer, and one end to the routing 1, 2, 3 interface.
2.Open your computer browser and enter the router settings interface in the ** bar.
3.If you don't connect to the router, the broadband cable is directly connected to the computer and you need broadband dial-up to access the Internet, the router selects ADSL dial-up for Internet access, if you don't need to dial up, you select dynamic IP for Internet access, click "Wireless Encryption" to set a password of 8 or more digits or more, and click OK.
4.Click Internet Settings - Network Status - Show that you are connected to the Internet.
If it shows that the connection is being made, then you can clone the MAC address, click System Management - Mac Clone, use the "check" of the machine to select it, and click OK. When cloning, you need to take a network cable to connect the computer to any one of the router 1 2 3 interfaces, do not connect the wireless signal of the router ).
5.Restart the router --- click System Management.
After restarting, go to the Internet settings again to check the network status, and it will show "Connected", then you can go online.
-
Anonymous users2024-02-10First turn on the power supply, and then plug in the network cable, plug in the WAN port (usually the blue port), and then connect with the computer network cable on which LAN port to plug in, after doing these things, then you will see that there is an address and account password behind the router, after connecting, enter the address you see in the router in the browser, generally of course, if your home is using ** online network, then you have to prepare an additional modem, commonly known as "cat").
02 Then enter, enter the corresponding account and password, generally the newly bought are admin
03 After entering the operation interface, you will see a setup wizard on the left, Attack on the entry (generally pops up automatically).
04Enter the setup wizard interface.
05 Click Next, enter the Internet access method settings, we can see that there are three Internet access options, if your home is dial-up, then use PPPOE. Dynamic IP can be used by plugging the computer directly into the network, and there is a DHCP server on the upper layer. The static IP is generally a private line or something, or it may be a cell bandwidth, etc., and the upper layer does not have a DHCP server, or wants to fix the IP.
I chose PPPoE because I dialed.
06 If you choose PPPOE dial-up Internet access, you need to fill in the Internet account and password, which should be understood by everyone, and there will be an account number to open broadband, and it is OK to fill it in.
07 Then the next step is to enter the wireless settings, we can see the channel, mode, security options, SSID, etc., generally SSID is a name, you can fill in at will, and then the mode mostly uses 11BGNFor wireless security options, we need to choose WPA-PSK WPA2-PSK, which is so safe that it will not be hacked and rubbed by the network.
08,>09Click Done, the router will automatically restart, at this time you wait patiently. The interface that appears after success.
-
Anonymous users2024-02-09Set it to repeater mode, you can see the SSID number of the wireless router after scanning, just fill in the password.
-
Anonymous users2024-02-08Fill in the SSID, password, channel and other information of the primary router on the bridge setting interface of the secondary router.
If DHCP is disabled on the secondary router, the key is that the secondary router must have the DWS function and enable it. The two routers can't be connected to the network cable, otherwise there will be a broadcast storm!
Of course, as long as it's not a simultaneous ** online TV program, it's no problem to connect to more than a dozen online TV sets. But if you want to let multiple network TVs at the same time, it depends on whether your broadband network speed can support multiple network TVs. 10Trillion below the broadband also supports a network TV,If you connect two network TVs,And watch network ** programs at the same time,**** is more stuck,Programs** often need buffering in the middle。 >>>More
First set up a router first, and then pull out a network cable from the port of the first router (if the first one is set as a wired router) to the second router (wireless router), and the 2 positions are reversed, and the setting method is the same! Connect the network cable to the first router, and the interface is different from the other colors! Then connect to the computer and enter it in the browser", or these 2 IPs are the most often used, admim password to come! >>>More
First of all, there is an exclamation mark to indicate that you have connected to the router, but the router is not connected to the Internet, so you need to enter your Internet access and password in the router's settings screen. >>>More
When you buy a wireless router, there is a manual inside, and there should be a login username and password on the box.
2.It is recommended to go to Settings, search for Reset Network Settings above, and try to reconnect after resetting Network Settings; (Resetting network settings will reset all network settings, including Wi-Fi, mobile data network, and Bluetooth settings, and will not delete other data or modify other settings.) ） >>>More