What should be paid attention to in the maintenance of agarwood bracelets

1. The most suitable temperature.

Although agarwood is an object, it does not mean that it can be placed at will. On the contrary, good agarwood must be stored at the right temperature to ensure longevity and quality. According to the experience of hardcore players, 18-21 degrees is the most suitable problem for the preservation of agarwood, this temperature is not high or low, it will not affect the oil play, nor will it reduce the life of agarwood.

If it is more than 39 degrees, then your agarwood bracelet will not only lose its fragrance, but even its longevity will be affected.

Therefore, in the summer, you must pay attention to preservation, and when it is hot, you must take it off and wait until the evening or when the weather is cool before wearing it.

2. Storage time.

Generally, there is no storage time limit for agarwood bracelets, and the longer the time, the stronger the fragrance and the more popular. However, if you want to maintain the quality of agarwood bracelets all year round, you must pay attention to the maintenance during the preservation process, otherwise it will be useless even if it takes a long time.

3. Storage place.

It is understood that some agarwood bracelet collectors do not attach much importance to the bracelet, thinking that it is just a string of beads, just find a place to put it. The direct consequence of this is that the bracelet is damaged or the fragrance dissipates due to poor storage. So, what's the right thing to do?

1. Be sure to put it in a cool place.

2. Avoid direct sunlight.

3. If the moisture in the house is too large, it should be stored with plastic wrap to avoid it from being damp and moldy.

4. Some people will use bead boxes to raise agarwood bracelets, and hardcore players agree with this practice. Especially when the bracelet is stained with sweat, it can be raised with bead powder, which can remove the smell and add more aroma.

4. Keep away from water.

The most feared thing about agarwood bracelets is the water of various detergents, whether it is soapy water, laundry detergent water, shampoo, skin care water, any kind of chemical water will cause damage to agarwood bracelets. So, be sure to avoid these. When washing your hands, washing your hair, or bathing, take them off as much as possible and put them in a clean place.

When you are sweating profusely, do not wear an agarwood bracelet. Because the oil distributed on the surface of the agarwood bracelet will change due to the invasion of heavy sweat, which will eventually cause the bracelet to fade and crack, and some will even become dirty, which is not liked by people. In addition, long-term wearing will make the agarwood bracelet form a pulp, and the pulp will be impregnated by sweat, resulting in discoloration and reduced taste.

First of all, can not be placed at will, especially with other flavors of items, such as sandalwood, etc., some people like to mix and match the wind, wear a variety of materials at the wrist bracelet, in fact, this practice is wrong, it is easy to cause the bracelet smell, or even bumps, it will also cause damage to the bracelet, as long as it is not the same production area and fragrance of agarwood, try not to wear at the same time. Secondly, you can't go in and out of places with heavy flavors at will, such as hot pot restaurants, barbecue restaurants, etc., because the external environment will also affect the aroma of the agarwood bracelet, after all, the bracelet beads are full of pores, it is easy to absorb odors, and even some ladies love to spray perfume, so try not to wear the bracelet at this time. Again, don't be exposed to the sun, the temperature is too high It is easy to volatilize the oil in the agarwood bracelet, the oil is gone, the aroma is gone, and the life of the bracelet will be shortened after a long timeOf course, it can't be damp, although the bracelet is not afraid of water, but it can't be placed in a humid place for a long time.

Finally, don't over-oil, some incense friends think that oiling the bracelet is the best maintenance for it, in fact, it is not the case, the agarwood bracelet itself has a fragrance, a touch of oil will block the pores, hindering the emission of fragrance, and at the same time avoid contact with chemical agents, such as laundry detergent, dish soap, shower gel, etc., these things can corrode the agarwood bracelet. Directly through the incense supreme, you can do a full range of knowledge of agarwood.

Do you know the maintenance and taboos of agarwood bracelets?Let's find out.

1. It is forbidden to oil and wax. Some friends have a special love for agarwood bracelets and often are on it. Oiling or waxing, in fact, this is completely redundant, but covers the original fragrance of agarwood, in the maintenance of agarwood bracelets, we make the fragrance of agarwood more durable, we should sleep at night when it is best to put it under the pillow or seal it with a sealed bag.

2. Anti-corrosion. The laundry detergent, shampoo, shower gel and other products we use daily contain more or less chemical ingredients, so in order to prevent agarwood from being corroded, we must take off the agarwood bracelet when we do these things.

3. Anti-collision and falling. The most important thing in the maintenance of agarwood bracelets is to avoid causing the most direct damage to them, for example, we should avoid collisions between agarwood and some hard objects;Prevent the agarwood bracelet from falling directly to the ground;Prevent the agarwood bracelet from scratching and so on. Source judgment.

4. Sunscreen. In the maintenance of agarwood bracelets, we should know that the high temperature resistance and sun resistance of the bracelet are very weak, we should avoid the occurrence of these situations, avoid the cracking of the agarwood bracelet, and when we do not wear the agarwood bracelet, we should use a sealed bag to store it to avoid the threat of high temperature and exposure.

5. Pay attention to the cross-flavor. It is best not to have other flavors in the place where the agarwood bracelet is usually placed, because the wood of the agarwood bracelet is soft and hollow, which is easy to absorb other flavors, which will affect the taste of the agarwood bracelet itself, resulting in the impure fragrance of the agarwood bracelet.

6. Do not soak in water. Since agarwood bracelets contain woody components, soaking in water for a long time will make the wood more loose and the oil volatile, especially pay attention to heat: water.

If you really touch the water, the agarwood hand beads will be a little fluffy, and will become white, this is a normal phenomenon, please immediately use a cracked and odorless coarse cloth or paper towel to absorb the water, and then play with it properly, and then place it in a cool place.