-
Anonymous users2024-02-121. First of all, use a soft cotton cloth to gently rub the bracelet for a week.
2. Then leave the bracelet naturally for a week to let it dry naturally, and at the same time, let the surface of the bracelet be in full and uniform contact with the air to form a fine and uniform oxide protective layer.
3. There must be no sweat stains, and it must be freshly washed, dry and odorless, and it can be plated for about 15 minutes a day, and a thin layer of slurry will be formed on the surface after about two weeks.
4. Leave the bracelet for a period of time and let it dry naturally, so that the slurry can be hardened to a certain extent.
5. Repeat the third and fourth steps, if the bracelet is well coiled, it will have a very aura of luster and is very bright.
6. If the bracelet is dirty, you can wipe it a few times with a slightly moistened cotton cloth, and then let it stand for a period of time before playing.
-
Anonymous users2024-02-11Senior veteran player, cultural play expert Wei Shao, the first person to talk about the small leaf red sandalwood on the Internet, the first person in King Kong Bodhi, in 2019, the grand launch of the one-minute fine lecture series, the rivers and lakes are deep, Wei Shao is reliable and real, teach you to practice the eyes of the eye, and turn into an old driver with a clear eye! It's clear to play a good skewer!
-
Anonymous users2024-02-101.First of all, for the new agarwood bracelet, we first have to use a very soft cloth or towel and rub it for a week. Then leave it naturally for a week to let it dry naturally, and at the same time we need to let it evenly contact with the air to form a uniform oxidation protective layer.
I can't just leave it there and don't care about it at all. 2.Then we have to start playing, and before we start, we must pay attention to the fact that our hands must be clean, and make sure that they are dry and do not have any other odors.
For example, friends who love to sweat should not go to the plate to play, because that may make the agarwood pollution, and it is not satisfactory after the plate comes out, so we must ensure that the hands are clean and tidy before playing. Generally, the best time to play is about 15 minutes, and then place the agarwood bracelet naturally and let it dry naturally, which needs to be in uniform contact with the air like the first step. After about two weeks, a thin layer of batter forms on the surface.
At this point, it can be said that it is on the right track. 3.Finally, wait until the bead pulp begins to harden to a certain extent.
We will repeat the previous two steps to play for a week and naturally place it for a week, so that the bracelet will appear very aura luster. If the beads are accidentally dusty, we can gently wipe them several times with a slightly damp cotton cloth and let them play in the dish for a while. It is recommended that the subject still buy an agarwood primer and learn it systematically.
Recommend "Cracking the Mystery of Agarwood Investment Collection".
-
Anonymous users2024-02-091. To play with the agarwood bracelet, you should first gently rub it with a soft cotton cloth for a week, and then place the agarwood bracelet naturally for a week to let the bracelet dry naturally, so that the bracelet can fully contact with the air evenly and form an oxide layer.
2. To play agarwood bracelets, you need to ensure that your hands are clean and dry before playing, and insist on playing for about 1 hour every day.
3. Place the agarwood bracelet naturally for a week until the slurry on the surface of the agarwood bracelet hardens, and then insist on playing with the agarwood bracelet for two weeks and place it for a week, the agarwood bracelet will become thicker and thicker, and the luster will get better and better.
-
Anonymous users2024-02-081.Do not come into contact with chemicals. Things like laundry detergent and laundry detergent in our daily life cannot be touched.
Therefore, we try not to wear it when washing clothes, so as not to produce a chemical reaction and affect the agarwood bracelet. And try to get as little water as possible. 2.
Avoid high temperatures and direct sunlight. High temperature and direct sunlight may cause the bracelet to crack directly, so it is generally sealed with a sealed bag and placed in a cool place when not wearing.
-
Anonymous users2024-02-07The agarwood bracelet should not have sweat stains, and the pulp needs to be allowed to dry naturally.
1. First of all, use a soft cotton cloth to gently rub the agarwood bracelet for a week.
2. After that, place the agarwood bracelet naturally for a week to let it dry naturally, and at the same time, let the surface of the agarwood bracelet fully and evenly contact with the air to form a fine and uniform oxidation protective layer.
3. Start the agarwood bracelet on the handpan, remember that the hands must not have sweat stains, and they must have just been washed, dry and odorless. The agarwood bracelet can be plated for about 15 minutes a day, and after about two weeks, a thin layer of pulp will form on its surface.
4. Place the agarwood bracelet for a period of time and let it dry naturally, so that its pulp can be hardened to a certain extent.
5. Repeat the third and fourth steps, if the plate is good, the agarwood bracelet will have a very aura luster, very bright.
6. If the agarwood bracelet is dirty, you can wipe it with a slightly moistened cotton cloth a few times, and then let it stand for a period of time before playing.
1.First of all, for the new agarwood bracelet, we first have to use a very soft cloth or towel and rub it for a week. Then leave it naturally for a week to let it dry naturally, and at the same time we need to let it evenly contact with the air to form a uniform oxidation protective layer. >>>More
Agarwood bracelets are scented.
The fragrance of agarwood cannot be synthesized artificially, so it is always regarded as the first of all incense. Due to the different production environment and formation conditions, there are obvious differences in the fragrance of agarwood, and there are about the following five common ones: >>>More
Because of the agarwood bracelets in the first-line production areas such as Vietnam, Brunei, and Darakan, because of the value and scarce resource production, the ** is very high, and the production of Papuan agarwood is more than that in these places, and the mining is less, so it is also much cheaper. In addition, a string of freshly mined Papuan agarwood bracelets will sink into water, and when it is completely dry, the oil content is about 5% less than that of sunken beads, so it is more than 70% cheaper than that of sunken water, which can be said to be very cost-effective. If you meet a merchant who says that it is agarwood incense from a certain production area, but it is very cheap, it may be Papuan agarwood. >>>More
Agarwood is weak and easy to be injuredAgarwood is usually soft in texture, afraid of falling, but also afraid of cracking, to prevent hitting hard objects and falling, you must pay attention not to be scratched by sharp things when playing. Many agarwood carvings are skillfully carved according to the shape of agarwood, and care should be taken not to crush or damage when wearing, let alone excessive strenuous exercise. If you want to understand agarwood systematically, it is recommended to understand the knowledge related to agarwood first, you can take a look at "Cracking the Mystery of Agarwood Investment Collection", this book is written by Sun Yuhui, the founder of the brand of Xiang Supreme, and explains the various knowledge of agarwood very systematically, which can be said to be a primer on agarwood!
Receive a new bracelet, first play with a white cotton cloth or white gloves for a period of time, a few days to half a month, do not rush to get started, this is because the sandalwood hand beads have not yet come out of the surface of the grease, did not form a thin protective layer, if this time wet or dirty, it takes a long time to wear to slowly dissolve, affecting the appearance and smell. >>>More