How to maintain agarwood bracelets? Specific steps:

Agarwood bracelet maintenance method.

1. Agarwood bracelets are not resistant to high temperatures, nor can they be exposed to the sun, strong light will make the agarwood bracelet deteriorate, so it must be avoided to let the agarwood bracelet contact with high temperature, strong light, etc., so as not to cause the agarwood bracelet to crack, such as not allowing the sun to shine directly on the agarwood bracelet. And when wearing an agarwood bracelet, it is best not to expose it to high temperatures above 40 degrees Celsius. If you don't wear an agarwood bracelet, you should store it in a sealed bag and store it in a cool place.

2. Because the agarwood bracelet is a mixture of oil, it is not afraid of water, but it is best to touch less water. In addition, the agarwood bracelet should not be put together or in any contact with chemicals, such as shampoo, shower gel, and laundry detergent. The chemical components in these chemicals can corrode the agarwood bracelet, reducing the grease content of the agarwood bracelet, which in turn can lead to a lighter odor.

Therefore, when you take a bath, wash your clothes, and wash your hair, you should take off the agarwood bracelet and place it.

3. The most important point in the maintenance of agarwood bracelets is to avoid collisions between agarwood bracelets and some harder things, to prevent agarwood bracelets from falling directly to the ground, and to prevent agarwood bracelets from being scratched by sharp objects or hard objects, etc., because these will seriously affect the wearing and aesthetics of agarwood bracelets. If it is a relatively light friction bump, it may only leave abrasion marks on the surface of the agarwood bracelet, but if the bump is serious, it may cause the agarwood bracelet to deform, which is very bad for the agarwood bracelet.

Although agarwood is an object, it does not mean that it can be placed at will. On the contrary, good agarwood must be stored at the right temperature to ensure longevity and quality. According to the experience of hardcore players, 18-21 degrees is the most suitable problem for the preservation of agarwood, this temperature is not high or low, it will not affect the oil play, nor will it reduce the life of agarwood.

If it is more than 39 degrees, then your agarwood bracelet will not only lose its fragrance, but even its longevity will be affected. Therefore, in the summer, you must pay attention to preservation, and when it is hot, you must take it off and wait until the evening or when the weather is cool before wearing it. If you want to know more about agarwood, you can go to the incense supreme consultation.

How to maintain agarwood bracelets.

The most feared thing about agarwood bracelets is the water of various detergents, whether it is soapy water, laundry detergent water, shampoo, skin care water, any kind of chemical water will cause damage to agarwood bracelets. So, be sure to avoid these. When washing your hands, washing your hair, or bathing, take them off as much as possible and put them in a clean place.

When you are sweating profusely, do not wear an agarwood bracelet. Because the oil distributed on the surface of the agarwood bracelet will change due to the invasion of heavy sweat, which will eventually cause the bracelet to fade and crack, and some will even become dirty, which is not liked by people. In addition, long-term wearing will make the agarwood bracelet form a pulp, and the pulp will be impregnated by sweat, resulting in discoloration and reduced taste.

If you want to know more about the knowledge of agarwood, you can go to the incense supreme consultation, where I learned a lot of agarwood knowledge!

6 ways to maintain agarwood bracelets: avoid high temperatures, avoid water, avoid contact with chemical ingredients, avoid bumps, pay attention to cleanliness, and insist on wearing.

1. Avoid high temperatures.

Maintain the agarwood bracelet to avoid high temperature environment or sun exposure, otherwise the surface of the agarwood bracelet will become more and more dry due to high temperature or sun exposure, and in severe cases, it will even lead to dry cracking of the agarwood bracelet.

2. Avoid getting wet.

Maintenance of agarwood bracelet also needs to avoid water, agarwood contains a certain amount of oil inside, if the agarwood adsorbs a lot of water and causes the oil content to decrease, the fragrance of the agarwood bracelet will be affected.

3. Avoid contact with chemical components.

In addition, the maintenance of agarwood bracelets should also avoid contamination with chemical ingredients, such as common perfumes, cosmetics, shower gels, and detergents all contain certain chemical ingredients, and chemical ingredients will cause certain corrosion to agarwood.

4. Avoid bumps.

Usually wear agarwood bracelets do not collide with other hardness of the rock items, and at the same time to prevent being scratched by sharp objects, which will seriously affect the aesthetics of the agarwood bracelet, and its collection value will be reduced.

5. Pay attention to cleanliness.

Pay attention to cleanliness during the wearing of agarwood bracelets, because after long-term spine wearing, a large amount of dust, dirt and other impurities are easily attached to the surface of the agarwood bracelet, and the color of the agarwood spike premature penetration bracelet will be affected to a certain extent.

6. Wear it consistently.

Agarwood bracelet is best to insist on wearing it on the body for a long time, ** the secreted oil can play a role in nourishing the bracelet, which can make the bracelet form a pulp faster, and its color will get better and better.

1. It is forbidden to oil and wax. Some friends have a special love for agarwood bracelets and often are on it. Oiling or waxing, in fact, this is completely redundant, but covers the original fragrance of agarwood, in the maintenance of agarwood bracelets, we make the fragrance of agarwood more durable, we should sleep at night when it is best to put it under the pillow or seal it with a sealed bag.

2. Anti-corrosion. The laundry detergent, shampoo, shower gel and other products we use daily contain more or less chemical ingredients, so in order to prevent agarwood from being corroded, we must take off the agarwood bracelet when we do these things.

3. Anti-collision and falling. The most important thing in the maintenance of agarwood bracelets is to avoid the most direct damage to them, for example, we should avoid collisions between agarwood and some hard objects; Prevent the agarwood bracelet from falling directly to the ground; Prevent the agarwood bracelet from scratching and so on. Source judgment.

4. Sunscreen. In the maintenance of agarwood bracelets, we should know that the high temperature resistance and sun resistance of the bracelet are very weak, we should avoid the occurrence of these situations, avoid the cracking of the agarwood bracelet, and when we do not wear the agarwood bracelet, we should use a sealed bag to store it to avoid the threat of high temperature and exposure.

5. Pay attention to the cross-flavor. It is best not to have other flavors in the place where the agarwood bracelet is usually placed, because the wood of the agarwood bracelet is soft and hollow, which is easy to absorb other flavors, which will affect the taste of the agarwood bracelet itself, resulting in the impure fragrance of the agarwood bracelet.

6. Do not soak in water. Since agarwood bracelets contain woody components, soaking in water for a long time will make the wood more loose and the oil volatile, especially pay attention to heat: water.

If you really touch the water, the agarwood hand beads will be a little fluffy, and will become white, this is a normal phenomenon, please immediately use a cracked and odorless coarse cloth or paper towel to absorb the water, and then play with it properly, and then place it in a cool place.