How to deal with newly dug tree roots for root carving?

What about tree roots, first of all, choose the kind that you need to keep and remove the excess? Remove the soil, clean it, and then dry it thoroughly, let it dry thoroughly, but if there are cracks in the process of drying, it is not good, so it will make the root of the tree more complete, and the root carving process must have thinking, to see from a distance, to see what he looks like, so what to carve? The process is relatively long, and it is also a big project to complete after that, and it has to be painted after completion, so that it will not rot!

It will not be corroded, because the humidity in the air will deform the wood, so only use a good quality paint brush! Place in a cool, dry room to maintain its integrity.

If you want to carve the newly dug roots, you should first clean them up, and then put them in a cool and ventilated place, so that they can dry out slowly, and the dry roots can be carried out. Handle to do root carving.

Dig the roots of the tree first to do root carving, how to deal with the newly dug roots, generally can not do root carving. Dig up the roots, dig out the roots, dig out, dig out, dig up, dig up

There are many tree species to do root carving, and we use more camphor wood roots, especially the old roots that have weathered for many years.

The beech ones are also good. Beech wood has high hardness, delicate wood, wood grain, and good color. Walnut, wild hard walnut, decades or centuries old roots are rare materials, the core material is all black, and the wood grain is extremely beautiful.

There are also acacias, which are brown and black in color, but they choke when they are processed. Of course, there are more than these, there are many better than these, such as quince, tabby sandalwood, and so on.

The roots can rot in situ, which can be directly rinsed with sulfuric acid solution; Also go to the pesticide store and buy a bottle of herbicide.

Place glyphosate. Fall directly around the roots of the tree, and over time, the tree will rot. Or you can often apply a lot of fertilizer around the roots of the tree, and the roots will rot and wither.

After the roots rot, you can irrigate the roots with the mother liquor of the tree protector to prevent and control airborne diseases, disinfect the plants, gently scratch the trunk with a blade on the skin of the disease, and brush the mother liquor of the tree protector, which can dry and fall off.

Keep the cultivation environment dry, and pay attention to the disinfection of the cultivation medium and site. After the semi-finished products are unloaded from the cabinet to the work shed, they are sprayed with Sukring.

head, to prevent the harm of gray mold. Before planting, use a sharp knife to sprain the top of the taproot.

and the decaying tissue is cut off, and then Sukrin is sprayed on the wound.

Methods of digging up tree roots.

When digging the roots of the tree manually, you must have handy tools, such as pickaxes and shovels.

Axe. First, use a shovel and pickaxe to dig out the soil around the roots, and after seeing the outline of the entire root, use an axe to cut off the roots.

You can then use an iron pickaxe to warp the entire root out of the pit, but the large roots are still very heavy, so it is faster to do it mechanically.

Here's how:1.Immediately after chopping, apply a 5-fold dilution of 41% glyphosate herbicide to the surface of the fresh saw.

2.If the saw edge is not fresh, use an axe to cut a fresh cut from top to bottom on the side of the stump, as in the case of glyphosate.

3.If the first application is not completely successful, apply it again according to the second method.

4.Cover the tree with opaque plastic.

Brief introduction of paulownia tree: The scientific name is plane tree. Deciduous tree, up to 35 meters high, with a broad canopy, grayish-green bark, irregularly flaky, flaking. The blades are palmate, with irregular and wavy teeth on the margins.

The spherical inflorescence is usually in a bunch of two, like a hanging bell, so it is called plane tree. As early as the Tongzhi period of the Qing Dynasty, Shanghai has begun to plant plane trees.

The sycamore tree has a tall trunk, lush branches and leaves, grows rapidly, is easy to survive, and is resistant to pruning, so it is widely planted as a street greening tree species"The King of the Trees"reputation. In terms of plant taxonomy, Sycamore belongs to the plane tree family, and there is only one genus under the family, namely the plane tree, with about 7 species in the genus, which are native to southeast Europe, India and the Americas.

To keep the surface clean. Because it is completely exposed to the excavation, it is easy to get dust, especially the carved part, which is more likely to accumulate dust, and the dust has all kinds of oxides and sundries, so it should be removed in time, otherwise it will cause the surface of the handicraft to be corroded. In the collection, it is necessary to try to avoid collision and collision, especially the collision of metal utensils.

In particular, the openwork parts should be protected.

Moth-proof and insect proof. Most of the insect pests are various wood-borers and termites. Collectors can use chemical anti-moth-proofing methods, such as placing mothballs, or spraying the moth-eaten area several times with the usual spray used to spray mosquitoes.

Root carving products are susceptible to deterioration and decay due to environmental and climate disturbances, so the importance of the environment is self-evident. We want to prevent the harm of moisture, many root carvings will have long hair due to moisture, so it is difficult to restore a root carving product. At the same time, daily maintenance, insect prevention and surface cleaning are also indispensable.

Then I'm going to have to brush up on a little bit of protective gas, and I'm going to have to dry it so I can get water.

There are lychee, wenge, camphor, boxwood, and quince.

1. Lychee wood.

Lychee wood can be used to make root carving, because it is strong and durable, wild varieties and artificially planted varieties have good corrosion resistance and termite resistance, and are good materials for wood carving, outdoor furniture, and classical furniture.

2. Wenge.

Wenge can be used to make root carving, wenge wood is "emu wood", also written as "wolfberry wood", is a kind of mahogany with chicken wing ("V" shape) pattern on the chord section of the wood heartwood. Wenge is known for its distinctive, unique texture.

3. Camphor wood. Camphor wood can be used to do root carving, heavy and hard, the wood is the most precious with camphor (small-leaved camphor), the fragrance is strong, the effect of insect and mothproof, mildew and moisture-proof is far better than other camphor wood, followed by red camphor, sassafras, large-leaved camphor.

4. Boxwood.

Boxwood can be used to make root carving, it has a tough texture, delicate texture, moderate hardness, bright color, some are egg yellow, and can be comparable to ivory after fine carving and polishing.

5. Quince. Quince can be used to make root carving, and it is the wood of Cinnamomum chinensis, which is a rare economic tree species in the world, with a solid and firm material and a fine and straight texture.

Any tree root can be carved as a root, and the key is to see the level of craftsmanship.

Any tree can be used.

Root carving, is a kind of carving.

The method is one of the traditional Chinese carving arts, which is to take the self-generated form and distorted form of tree roots (including tree body, tree nodules, bamboo roots, etc.) as the object of artistic creation, and create artistic image works such as figures, animals, and utensils through conception, artistic processing and technological processing.

Fresh root carving raw material treatment] If the root carving material is "raw material", that is, fresh material, this material is rich in nutrients, easy to grow insects, it must be steamed first, the root material is put into the cooking box during cooking, and the water volume reaches one-third of the cooking box, and then the cooking box is covered with canvas, keep the boiling point of the water above 95 degrees, and cook continuously for 3 to 5 days until it is boiled through, and the cooking time of small materials can be shortened, as long as it is boiled thoroughly, and finally rinse the boiled roots with a high-pressure water gun. In order to achieve the purpose of demuding, derotting and peeling. In order to avoid discoloration, deformation, decay and cracks in the root carving works, it is also necessary to properly dry the fresh raw materials. After that, further processing is possible.

Root carving] one of the traditional carving arts of the Han nationality is to take the self-generated form and distortion form of tree roots (including tree body, tree nodules, bamboo roots, etc.) as the object of artistic creation, and create artistic image works such as figures, animals, and utensils through conception, artistic processing and technological processing. The art of root carving is to find natural beauty and show creative processing of plastic arts, the root carving process pays attention to "three points of artificial, seven points of nature", which means that in the creation of root carving, the natural form of the root material should be mainly used to express the artistic image, auxiliary artificial processing and modification, therefore, the root carving is also known as "the art of the root" or "the art of the root".

First, apply a layer of tung oil on its surface to prevent the root carving from drying and cracking.

Summary. Kiss. Hello, this root carving material must choose the material hard, delicate wood, stable wood, not easy to crack and deform, not decayed and immortal can be preserved for a long time, such as boxwood, sandalwood, beech, cypress, elm, etc. are the best material varieties of root art modeling.

Kiss. Hello, this root carving material must choose the material hard, delicate wood, stable wood, not easy to crack and deform, not decayed and immortal can be preserved for a long time, such as boxwood, sandalwood, beech, cypress, elm, etc. are the best material varieties of root art modeling.

What kind of wood is this, please.

What is this work called.

Kiss. Hello! I can't see this clearly. Don't wait a minute.

Burmese rosewood. Large-fruited red sandalwood cherry tree. Full of gold. Goldfish wood carving. The handicraft ornaments were bought by a friend's house for demolition, is there any collection value? Not sure how much it's worth.

Kiss. Hello! This one is good. There is a pro of the collection **. This is about 20,000 pros.