-
Anonymous users2024-02-11This depends on the fact that your abnormal noise is sent from **, and it is recommended that you go to a local professional repair shop to check it.
-
Anonymous users2024-02-10If the oil viscosity is too high, resulting in insufficient lubrication during engine operation and abnormal noise, the oil can be replaced. If the tightness of the belt is not enough to make an abnormal noise, adjust the tightness of the engine belt. Due to the damage, deformation and falling off of the brake shoe support plate, shock absorbing spring plate or guide plate of the disc brake, the gap between the brake shoe and the brake caliper support frame increases, and the sound of hitting each other can be repaired at the maintenance station.
How to solve the abnormal noise of the Kia K3 engine? If the oil viscosity is too high, resulting in insufficient lubrication during engine operation and abnormal noise, the oil can be replaced. If the tightness of the belt is not enough to make an abnormal noise, adjust the tightness of the engine belt. Let's take a closer look.
1. The abnormal sound of cold start is usually started after the car is parked for a period of time, and there is a relatively large sense of vibration and abnormal sound of "da-da". When the car is parked for a long time, the oil flows back to the oil pan, and the oil pump cannot immediately establish the oil pressure when the cold car starts, especially in the upper part of the engine, the valve is not sufficiently lubricated, and the hydraulic tappet and mechanical rocker arm fail to work normally, resulting in abnormal noise. This normal phenomenon, don't pay attention to it, it will be fine for a while.
2. If the oil is not suitable, the viscosity of the oil is too high, which will lead to insufficient lubrication during engine operation, friction, and abnormal noise. The solution is to change the right oil.
3. The tightness of the belt is not suitable, and the tightness of the belt is not enough, which will make a squeaky and sharp sound, which sounds particularly uncomfortable. The solution is to adjust the tightness of the engine belt.
4. When the engine valve has too much carbon deposition or the timing adjustment is wrong, the engine will have a "poof" sound. The solution is to clean the valve and adjust the valve timing.
5. When the inlet and exhaust pipe leaks, the gas will leak from the leakage, resulting in vibration and abnormal ringing. The solution is to check the intake and exhaust pipes and replace them.
Photo by Q&A) @2019
-
Anonymous users2024-02-091. The steering column is not lubricated and has high friction; 2. Lack of steering power oil; 3. There is a problem with the universal joint; 4. The chassis suspension balance rod lifting lug sleeve is aging and hardening; 5. The plane bearing is damaged; 6. The internal wiring harness of the steering wheel is not fixed or the airbag hairspring is faulty.
The reason for the abnormal sound of the cracking and burial sub-K3 direction book Huai Pan is:
1. The steering string is not lubricated and has high friction;
2. Lack of steering power oil;
3. The universal joint has questions;
4. The chassis suspension balance rod lifting lug sleeve is aging and hardening;
5. The plane bearing is damaged;
6. The internal wiring harness of the steering wheel has the problem of fixing or airbag hairspring failure. The Kia K3 is a compact car, the length, width and height of the car are 4600mm, 1780mm, 1445mm respectively, and the wheelbase is 2700mm. In terms of power, the Kia K3 is equipped with a naturally aspirated and turbocharged engine, with a maximum power of 115 horsepower and a peak torque of 144 Nm, matched with a new CVT continuously variable transmission; The engine has a maximum power of 130 hp and a peak torque of 211 Nm, mated to a 7-speed dual-clutch transmission.
1. The steering string is not lubricated and has high friction; 2. Lack of steering power oil; 3. There is a problem with the universal joint; 4. The chassis suspension balance rod lifting lug sleeve is aging and hardening; 5. The plane bearing is damaged; 6. The internal wiring harness of the steering wheel is not fixed or the airbag hairspring is faulty.
-
Anonymous users2024-02-08Due to the damage, deformation and falling off of the brake shoe support plate, shock absorbing spring plate or guide plate of the disc brake, the gap between the brake shoe and the brake caliper support frame is increased, and the sound is made by hitting each other.
Dongdou Doufeng Kia K3 abnormal noise sometimes appears during the driving process of the car, which is the inevitable problem of abnormal noise of the car. But these abnormal noises can not be ignored, because in many cases it is often due to the abnormal movement of the running parts, wear and aging and other reasons to bring abnormal noise, if not timely detection and repair, the light affects the driving mood, and the heavy brings driving safety hazards.
1. When the brake disc is abnormal and the vehicle is driving on a flat road at a low speed, there is an intermittent and irregular "rattling" sound at the axle part, and the sound will be slightly aggravated when the speed increases, but there is no change when going uphill and downhill and turning; When driving on uneven roads, the sound is aggravated, and the sound of pressing the brake pedal with your foot is reduced or eliminated. When stopping for inspection, you can hear an abnormal sound by rotating the wheels back and forth. This is due to the damage, deformation and falling off of the brake shoe support plate, vibration damping spring plate or guide plate of the disc brake, which increases the gap between the brake shoe and the brake caliper support frame, and makes a sound when it hits each other.
You can go to the repair station to repair the deformed parts and replace the parts that have fallen off.
2. The steering wheel turns to abnormal noise, and the steering wheel will find abnormal sound when playing left and right wheels, when the direction is halfway to the abnormal sound, it can be basically judged as the abnormal sound of the steering machine.
3. Abnormal body noiseIn the process of driving, especially when accelerating or braking suddenly, there will be some abnormal noise in a certain part of the car, although it does not affect the safety of driving, but it always makes people feel uncomfortable, and they are also worried about whether there is a real fault. The problem of abnormal sound in the body is usually due to the insufficient stiffness of the body, which leads to the deformation of the vehicle during driving, the friction or shaking of the door and the frame, or the friction between the steel plates due to dewelding in some places. This is mainly due to the quality of the car, and there is basically no solution.
However, some body parts may also cause abnormal noises if they are not properly fixed, which can be solved by tightening the screws or changing the tape.
4. The abnormal sound of the side door glass and the glass of the driver's seat and the side door of the co-pilot from time to time are likely to be loose. To open the door, there is a U-shaped hollow grinding clip on the body, the one connected to the door, loosen it with a plum wrench, push it a little inward, don't be too close to the inside, otherwise it will be more difficult to close the door, centimeter-1 cm.
5. The abnormal sound of the inner pull line of the car door and the abnormal sound caused by the inner pull line of the door hitting the door panel. When the inner pull line of the door hits the door panel, the sound is still obvious, what to do is to disassemble the door trim panel first, and then wrap the inner pull line of the door with a small sponge, so that there is no noise, which is also one of the reasons for the abnormal noise of the car.
It depends on what car you compare with, to be precise, K3 is more homely, but with a bit of European flavor, the handling can still be handled, but the driving limit is not high, compared with the same brother Langdong, the suspension is a little harder, the road sense is clearer, this is still helpful for driving control, and the chassis is also more solid, high-speed stability is better than Langdong, but limited by the suspension of the travel is shorter, and the bad road is not enough to take the road This is the same as Langdong, secondly, because the Korean system has filled most of the cost of building the car on the configuration, so the workmanship materials will not be too good K3 The interior workmanship has a strong sense of plastic, but it is exquisite, and the silent performance is not too good This is compared with the same level Almost similar to Xinfu and Yinglang This level of benchmarking can not be compared with the interior workmanship is also so dynamic Biased towards Japanese style Start briskly Low rev power is excellent Slightly weak after high revs Power confidence is insufficient, so K3 driving texture at low turns and low speed is very similar to Honda Civic After high speed, power confidence is not as good as Civic chassis From the specifications of the torsion beam, naturally it cannot be compared with Xinfu of the same level benchmark The driving limit and fun are much lower, in summary, K3 is cost-effective Good configuration, home transportation is enough to cope with Of course, the chassis handling can also cope with the lack of workmanship, but the workmanship is not very advanced, the silence is average, the chassis handling limit is not high, the suspension stroke is short, and the shock filtration is slightly fragmented.
This level of ** brand of engine oil will do! Castrol Gold Jiahu and Silver Jiahu are all right! >>>More
The Kia K3 was officially launched in China in 2012, and although it underwent a major facelift in the middle of the market, the Kia K3 has never been sold well in the market due to the intensification of market competition. Although it achieved monthly sales of more than 10,000 units in December last year, in the first three months of this year, sales remained at more than 1,000 units, less than a fraction of mainstream compact cars such as Sylphy and Lavida in the same class. >>>More
Hello, if the sound is coming from under the car, you may need to check the steering machine, the steering knuckle, and if it is coming from the engine compartment, you may need to check the shock absorbers. >>>More
The gap between the piston and the cylinder wall is too large; The piston pin assembly is too tight or the connecting rod bearing assembly is not too tight; The gap between the tappet and its guide hole is too large; The air distribution cam profile is worn. >>>More