Is there an anti collision steel beam in the front and back of the southeast Mitsubishi Jishen?

Updated on Car 2024-06-17
16 answers
  1. Anonymous users2024-02-12

    There are anti-collision steel beams in the front and back, as thick as duck eggs, I'm not a connoisseur. I saw it with my own eyes when I was repairing my car after my junior crashed.

  2. Anonymous users2024-02-11

    There are anti-collision steel beams before and after the southeast Mitsubishi Jishen, the performance is relatively good, and there are also reinforced anti-collision strips on the left and right, and the safety is better.

  3. Anonymous users2024-02-10

    Hello, according to the understanding of the southeast Mitsubishi Jishen front and rear left and right anti-collision steel beams, safety is no problem.

  4. Anonymous users2024-02-09

    Hello, there are door panel guards for the four doors. There is no reduction in the rear anti-collision steel beam. This car is too niche to be purchased.

  5. Anonymous users2024-02-08

    Hello, this vehicle is equipped with impact beams at the front and rear. There are also anti-collision reinforcement strips on the left and right sides. You can take a test drive of the vehicle and feel for yourself.

  6. Anonymous users2024-02-07

    Hello, this car has anti-collision steel beams, left and right, all of which have anti-collision structures for the car as a whole, and there is no problem with safety.

  7. Anonymous users2024-02-06

    Hello, the left and right doors of this car are set up with anti-collision steel beams, but there are steel beams in the front, and there are no in the back.

  8. Anonymous users2024-02-05

    This car has a crash resistant steel beam in the front and no configuration in the back. On the side, he has stiffeners on the inside of the door.

  9. Anonymous users2024-02-04

    Hello, Mitsubishi Wings God this car only has front and rear impact beams, and there are no impact beams on the left and right, and the safety performance is OK.

  10. Anonymous users2024-02-03

    You seem to have a car with anti-collision steel beams in the front, and the back is integrated with the trunk, and there are no anti-collision steel beams, and the side doors are all with stiffeners.

  11. Anonymous users2024-02-02

    This one is there, but it's a bit thin.

  12. Anonymous users2024-02-01

    Some. Mitsubishi's car, there is.

  13. Anonymous users2024-01-31

    For this car, the overall safety factor of the vehicle is relatively high when it leaves the factory with anti-collision steel beams.

  14. Anonymous users2024-01-30

    Hello, there is, there are inside the front and rear bars and in the 4 doors. [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

  15. Anonymous users2024-01-29

    Hello owner, this car is equipped with anti-collision beams when it leaves the factory, and the safety is still guaranteed, so please feel free to use it, I hope it can help you [If you have a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

  16. Anonymous users2024-01-28

    Yes, only the anti-collision beam of this car may be thinner

    Related questions
    Mitsubishi and Suzuki, is the Southeast Mitsubishi V3 good
    7 answers2024-06-17

    Of course, it's not one, it's all Japan"Co., Ltd"It's all great, but it feels like Mitsubishi is even better, and it's the same with cars.

    Is it illegal for Mitsubishi Wings to be modified like this?
    5 answers2024-06-17

    In fact, car tuning is nothing more than a reproduction of personality; Don't go too far, but also be careful not to violate the relevant regulations; A proper embellishment can also play the role of the finishing touch; In the modification of the car, it is mainly divided into the following aspects: 1. The appearance of the vehicle; 2. Power, performance and handling; 3. Interior and exterior decorative aspects; 4. Other aspects of the vehicle; The following is the modification content of the Lingshuai car by car enthusiasts, for reference only; The main thing is a big encirclement. Different materials** are also different, ordinary should be about 800-1500, if it is carbon fiber, at least 8000-23000; Audio. >>>More

    Mitsubishi PLC programming for help masters, how to write Mitsubishi PLC programming programs into P
    15 answers2024-06-17

    Mitsubishi PLC programming program how to write PLC Hello, 1, after the program is written, you need to transform the program first, there are three ways to transform: the first is to press the F4 key of the keyboard directly, the second is to click the "transform" menu bar, and then click the first item "transform", the third is to click the "program transform" button of the toolbar, we choose the appropriate transformation method according to their own habits 2, after the program is transformed, you need to check whether there are syntax errors in the program, This check only self-diagnoses the syntax, not the design content. To check the program, click "Program Check" in the menu bar of the tool. >>>More

    What is the difference between Mitsubishi Heavy Industries and Mitsubishi Heavy Industries Haier? Ar
    12 answers2024-06-17

    The full name of Mitsubishi Heavy Industries in China is: Mitsubishi Heavy Industries (Shanghai) Air Conditioning System ****, which was established by Mitsubishi Corporation in 2003. >>>More

    How about Mitsubishi forklifts? What are the types and performance of Mitsubishi forklifts?
    30 answers2024-06-17

    Mitsubishi forklift performance is stable, at present, large ceramic factories are using Mitsubishi forklifts, daily maintenance is done, basically no maintenance, want to know more about Mitsubishi forklifts can call 0769-23102690Trust us to answer your satisfaction.