What is the reason why the gas meter is not gas? What are the reasons why the natural gas meter is n

1. The gas meter cannot be ventilated may be due to the bending of the gas connection pipe, in this case, only the position of the pipe needs to be aligned.

2. If the connecting pipe is not bent, it may be caused by gas exhaustion, you can check whether there is a zero sign on the gas meter display, if there is, it means that the gas is exhausted, in this case, you only need to buy gas to restore ventilation.

3. It is also possible that the riser valve is closed, in a sense, the main pipe of the householder has an indoor filter valve, which is generally on the 1st floor, and in some cases is on the 2nd floor.

4. We can contact the gas company for repair, it is best not to repair at home, the gas company maintenance personnel will go to investigate and confirm that there is no air pressure, and then we open the riser valve, at this time the gas meter at home can be ventilated.

5. Without this step, there is no way to ventilate the gas meter, so blindly operating at home will not only bring great danger to yourself, but also will not solve the problem immediately.

6. It is also possible that the total valve of the user is closed, if the total valve and the pipeline are closed at 90 degrees, we can take a look, if we really multiply 90 degrees, we will adjust the total valve handle by itself, and keep it parallel.

I think the gas meter is not gassing because it is blocked

There are many reasons why the natural gas meter is not ventilated, such as the gas meter is in arrears or the internal battery is automatically cut off when the battery is out of power, resulting in no gas output; There is no gas due to the unopened valve of the pipeline**; The gas stove battery is not installed or the power is insufficient, resulting in the solenoid valve cannot be opened and there is no gas input; The solenoid valve is damaged; The solenoid valve drive voltage output of the pulse igniter is faulty, causing the solenoid valve to not work.

The corresponding solution to the above problems: check the balance of the gas meter and prepay the fee in time to ensure that there is no arrears. Check whether the battery in the meter is insufficient and replace it in time; Check whether the gas pipeline valves are all open, or if they are damaged, replace them as soon as possible to ensure that the gas is normal**; Check whether the battery box under the gas stove has batteries, whether the power is sufficient, and replace them in time; Replace the solenoid valve of the original model of the same specification to ensure that it is opened normally under control; Replace the pulse ignition assembly to protect the driving voltage output of the solenoid valve normally.

Precautions: Gas stoves and gas water heaters are the same as gas water heaters, if the flame-out protection device is damaged, it is very harmful and prone to gas leakage or ** situation, so if you find such faults, you should ask professional repair personnel to repair them in time.

Today's natural gas meters have built-in solenoid valves, and it is necessary to install a battery, and then charge the gas in the gas card into the card, so that the gas meter can be opened for ventilation.

Answer dear, hello, I will help you answer this question, I am answering it for you, please wait a while, don't be too anxious, I hope my answer can help you, solve your troubles, I wish you a happy life and good health.

Hello, the smart gas meter is not ventilated may be due to the gas meter battery has no power, the LCD screen shows lo, the valve is closed, there is no reflection after inserting the gas card, and the user needs to replace the gas meter battery.

If the replacement has just been completed, the master will close the valve in front of the meter for safety reasons, and open it by itself when the user is in normal use, if the air leakage is found during the security check, the security inspector will close the valve in front of the meter for safety reasons. In this case, you cannot open the valve in front of the meter by yourself, and you need to make an appointment with a maintenance master to repair the air leakage immediately.

Ask a good question, our smart gas meter is inductive, not inserted into the card, I just took the card in the induction area a few times and it will not be ventilated, and it will start to be good.

I'm angry that I still have a lot of money in the card, what's going on?

Question: How do you crack it?

Answer: The anti-interference ability of IC card gas meter is weak, especially in places where the environment is relatively harsh, such as the catering industry of commercial users, humidity, high temperature, oil smoke, steam, etc. are corrosive to it, and often cause the IC card to be inserted into the meter, and the meter does not read the card.

Question: I'm not a gas meter with a card, it's a smart meter.

It didn't work to ask questions, I wiped it off.

The natural gas meter is not ventilated, so ordinary people should not mess around, and it is best to find a gas company to deal with it.

The solution is: if it is a problem with the user card, you can go to the gas company in time to replace the user card, which can solve the situation that the gas card has been purchased and cannot be charged on the meter. Other users who share the same pipeline with the user to repair a fault, close the relevant gas gate, the pipeline is empty, and the natural gas outlet will not have gas.

If the balance of the gas meter is higher than 100 cubic meters, many models of gas meters cannot be charged with gas figures. If the number of the gas meter is less than 100 cubic meters, the gas card can not be charged to the gas meter, and the gas meter battery will be dependent.

When the battery of the gas meter is under-voltage, the number in the gas card cannot be charged to the gas meter. Don't look at the number displayed on the LCD screen of the gas meter, the displayed number does not mean that the power is sufficient. Replace the gas meter battery and reinsert the gas card.

Within 30 seconds, you can see the LCD number change, recognize that the balance is correct, and you're good to go.

Check whether the gas meter matches the household number of the household, if it is a gas card recharge, the direction should be correct when you come back to insert the card, and the battery in the meter must have sufficient electric energy.

If the gas meter can't be filled, you should call someone from the gas company to deal with it, because if you move it yourself, it will easily cause gas leakage and cause danger.

1.What is the matter with the gas meter having numbers but not gassing 1. The battery of the gas meter is out of power, thus closing the solenoid valve; 2. The gas meter is damaged and cannot be used normally; 3. The gas pipe is blocked, resulting in the inability to get out of the gas; 4. The pressure regulator is closed, which is caused.

2.How to maintain a gas meter.

3.For the gas meter to function properly, it must have four No. 5 batteries. If the battery is corroded by fluid, it will also cause the gas meter to be unusable, so it is necessary to carry out regular battery operation.

4.It is also very important to maintain the appearance and cleanliness of the gas meter. In normal times, you can use a damp cloth to gently wipe the flame.

If the LCD surface of the gas meter at home does not display numbers, but the gas can still be used normally, it may be that the battery is about to run out, or there is a problem with his LCD surface.

The gas meter does not show it, and the gas can still be discharged. If this happens, the gas meter is broken. You should go to the gas company immediately. Give you a new watch.

No, it's that the 4 No. 5 batteries inside are out of power, and the voltage is not enough, so the meter starts to ring. The sensor does not require much electricity to calculate the flow rate. Changed the battery.

The gas meter is not displayed, and you can still go out, it should be that the digital display inside is turned off, and the digital display can be turned on.

After recharging, the gas cannot be used normally, mainly due to the following reasons:

1. For prepaid gas meters, there is a solenoid valve inside them that can automatically cut off the gas, and the solenoid valve will automatically close after the gas meter is in arrears and cut off the gas. When we recharge again, the solenoid valve cannot be automatically opened. The reason why this design is to prevent accidental leakage of gas, for example, the valve of the follow-up equipment is not closed, and we do not care about it after recharging, which may lead to gas leakage and cause accidents.

Therefore, many gas meters have to be manually restarted after recharging, and if they are not restarted, they are still not gasy.

Solution: There are different methods according to different gas meters, which can be roughly divided into two categories, one is to press and hold the button on the gas meter after recharging, when you hear the sound of the valve opening, the LCD screen shows that the valve is opened, even if it is opened. The other type is the gas meter without buttons, you need to re-insert the recharge card of the gas meter, insert it into the gas meter, and wait for a few seconds to hear the valve open, and you're good to go.

2. At present, many gas meters are still powered by dry batteries, and when the battery is insufficient, the solenoid valve of the gas meter cannot be opened automatically. Although sometimes, the gas meter shows normal, the solenoid valve still does not open.

The main thing here is that the battery is low enough to support the information display of the gas meter, but not to support the rotation of the solenoid valve motor and open the solenoid valve. Even if it can be used normally when there is gas before, it does not mean that after it is closed, it can still support the reopening of the solenoid valve. In this way, there will also be the problem that gas cannot be used after recharging in arrears.

There may be some differences in the query method of different gas meters, when the IC card is not inserted, there is no display on the LCD screen on the gas meter, so you can't see the remaining gas volume. How to check the gas meter when there is no gas: take out the IC card when recharging gas, and pay attention to the location design of the chip.

1. When recharging gas, the amount of gas charged is stored in this card. Now open the battery cover plate under the gas meter, grasp both sides of the cover plate with your hands, and gently pull it out (when you want to check how much gas is left, please make sure that the battery in the gas meter still has electricity).

2. After opening the battery cover plate on the gas meter, find the slot of the IC card in the meter, and gently insert the gas IC card into the gas meter from the bottom up, paying attention to the forward and negative directions in which the IC card chip is inserted. At this time, if the battery in the gas meter still has power, a number will be displayed on the display below the gas meter, which is the total amount of gas remaining on the gas meter, and the unit is cubic. If you want to know how much money is left on the meter, then multiply the gas consumption by the gas price.

What to do if the gas meter does not produce gas.

1. There is also a valve in the gas meter that needs to be manually reset to ventilate. Generally, the gas valve opening state is gas without inserting the card, and the gas will automatically close the valve if the gas is not used for three days without inserting the card, and the gas meter will also close the valve if the battery display is not lit, depending on what kind of situation you have.

2. Please check whether the battery has electricity and then if it is a prepaid gas meter, whether there is a balance between different gas companies around the country, will set different overdraft gas consumption, try to insert the IC card into the meter in reverse, whether the valve will be opened, but this method can only be used temporarily for emergency use, and according to the different settings of the gas company, some cities are not allowed to overdraft the use of gas, I hope my answer will be helpful to you.

3. Please check whether the battery has electricity and then if it is a prepaid gas meter, whether there is a balance Different gas companies around the country will set different overdraft gas consumption, try to insert the IC card into the meter in reverse, whether the valve will be opened, but this method can only be used temporarily for emergency use, and according to the different settings of the gas company, some cities are not allowed to overdraft gas.

1 The electronic stock value is zero; The battery is dead; The solenoid valve is broken; The interior is blocked to find a professional repair.

2 Look at the angle valve first, and find a professional repair inside. Please adopt.

If you use a card, there is no money on your card.

If you don't use the card, you have to call ** to the gas company to let them overhaul.

It is not ventilated, and there is air coming in from outside, and it is the left and right sides of the table that are not ventilated.