What kind of technology is circuit board CAM?

Eager to learn, dealing with the auxiliary revision work of film negatives (similar to the negatives filmed in hospitals) and doing gong drilling procedures, just find someone to take you, and you can't learn anything from special training classes, at most it will take you to get started. The salary is not very good, a little better than that of ordinary workers, it will not exceed 2500 at the beginning, and it is generally 12 hours of work. The highest amount of experience is 3500, unless you are a supervisor and manager will break through this number (the current level, I dare not say it in the future), I am a person who mixes in the PCB industry.

Outside the Shenzhen Guan, there are many training points in Fuyong and Shajing in Bao'an, and the tuition fee for PCB is about 1800 yuan, and FPC is a little more expensive.

CAM industry environment is good to do things in the office, CAM mainly learns CAM350 and Genesis2000, these two software are relatively easy to use, and there are several software that also have to know some basic data transfer operations, which are pads, CAD, 99SE. There are requirements for academic qualifications in large factories, and the salary is about 3000-4500! I recommend that I go to Genesis 2000 and pay about 1600 tuition privately.

It is very easy to learn, but a lot of it depends on experience, and there are not too many requirements for academic qualifications, and the salary is about 2000-3000 (initially).

Later, if you have experience, it is still feasible in 5-6k.

One is to design the circuit board, and the other is to organize the circuit board.

Circuit board designer, also known as layout engineer, belongs to the nature of research and development, its main work is to design wiring according to the product structure and functional requirements, requiring at least one wiring software, such as power PCB or PROTEL 99, etc., with high English proficiency requirements.

CAM engineers mainly according to the layout engineer designed the data and combined with the process requirements of the circuit board factory to optimize the data after typesetting production, belongs to the nature of the project, depending on the service of different customers on the English proficiency requirements are also different, domestic orders are basically no requirements, for reference.

The position is generally an engineer, mainly for the pre-processing of the circuit board after receiving the order, such as: the line is not wide enough to compensate, the line spacing is less, to cut off, to make some corresponding compensation on the hole diagram designed by the customer, check some wrong design, meet the requirements of the customer and the factory production, and ask the customer to modify; If you want to work in this department, it is not difficult, find a training room for 2 months, when you master the skills, just there is a need for people, you recommend yourself to go, the general factory will give priority to the selection of factory personnel, good luck!

CAM Engineer. As long as you can operate the Genesis2000 software. And master your company's equipment and process parameters. This kind of position is not very difficult.

Computer-aided manufacturing, engaged in gerber,

It depends on personal preference, if you like to sit in the office every day, then choose CAM engineering, if you like to learn to move around and like to analyze and solve problems, then choose technical technology.

Generally, customers provide DDB (i.e. Protel files), including schematics, netlists, and electrical checklists. Then you have to make a PCB diagram according to the customer's needs. Set the parameters in the File Cam Manager of the PCB interface and gerber everywhere.

The rear left can be done in the CAM350, and it can also be done in the genesis.

We have to learn professional software such as: genesis2000 geflex cam350, etc., but the division of labor is different, MI is for the customer, CAM is for the factory processing data.

The CAM engineer is the one who writes the data or converts the customer's raw data into the factory data.

An MI Engineer is a writing process or review process, which can also be called an OAE Engineer.

It depends on what you do, is it managerial or technical? Do the promising point of technology. I studied CNC and cam programming, and I don't know if the cam you mentioned is the same as what I learned.

Whether it is management or technology, it cannot be said that there is no future! As long as you are proficient in one line to the best can stay, now is the era of science and technology, electronic products abound, of course, this PCB industry is indispensable.

The CAM engineer in the PCB factory is responsible for the circuit board optimization design. When the designer submits the working draft to the manufacturer, due to design and process defects, CAM engineers are required to optimize the design of the PCB photographic file before production, which mainly includes the compensation and error correction of the circuit, the compensation and optimization of the drilling, and the production of the imposition. For example, the design of the line spacing is too small and needs to be corrected by CAM engineers in order to produce a qualified circuit board.

The main software they use is Genesis 2000 and CAM350.