-
I still remember that 10 years ago, it was already very good to have a reversing sensor on the car, and the reversing image was a configuration that only luxury cars would have. But now when buying a car, the reversing image has almost become the standard, even if there is no reversing image on some low-profile models, the owner will also install one after buying it back, anyway, this thing is very cheap, a few hundred yuan can also be installed for thousands of yuan. The emergence of reversing images has indeed brought great convenience to drivers and friends, especially some novice friends, who no longer have to worry about hitting the rear vehicle when reversing.
But a few days ago, when I was in my friend's car, his reversing image happened to be broken, and he became at a loss when reversing, and said that I should go down and help watch. All right! As a veteran driver, I couldn't bear it anymore, so I told him a trick to judge the distance between cars behind without looking at the reversing image.
Next, the old driver will share this method with you, one is to make an auxiliary reference, and the other is to encounter a car without a reversing image, and everyone will not be at a loss.
In fact, this method is very simple, that is, to judge the distance of the car through the rearview mirror, yes, it is the interior rearview mirror in the car. So how do you look at it? Don't worry, let's talk about it in detail:
When we see the front of the rear car through the rearview mirror, but we can't see the front bumper, the distance between the two cars is about 5 meters. When you can only see the front windshield of the rear car through the rearview mirror, and you can't even see the edge of the hood, the distance between the rear car and you is about a meter away, so you must be careful at this time.
What should I do if I don't have a reversing camera? Old driver's trick, use the rearview mirror to judge the distance behind the car! Have you learned it now?
However, it should be reminded that this method will be affected by the height of the driver, the model of the rear car, and the angle of adjustment of the interior mirror. In the process of practical application, there will be a certain error, so when you are not sure, it is best to hang the neutral gear and pull the handbrake to get out of the car to take a look, so that you know the best!
-
Hello, if there is no reversing image, then when reversing, you need to use the rearview mirror to look behind and use the rearview mirror to judge the distance between the car and the obstacle behind you. Most experienced drivers don't need to use such a thing as a reversing camera. When reversing, it is not difficult to accurately judge the attitude of the body and the distance from the obstacles behind it.
When reversing, if you want the rear of the car to move to the left, you need to turn the steering wheel to the left. If you want the rear of the car to move to the right, you have to turn the steering wheel to the right. When reversing, if you want the front of the car to move to the left, you have to hit the steering wheel to the right, and if you want the front of the car to move to the right, you have to hit the steering wheel to the left.
Although some cars do not have a reversing camera, they will still be equipped with a reversing radar, which can help the driver determine the distance between the car and the obstacle behind it. If there is no reversing radar, then the riders can spend their own money to install one, and it is very simple to install a reversing radar. When using the car in ordinary times, if your reversing skills are not good, then you must practice often.
When reversing, you can look for some lines on the ground as a reference, and when reversing, you can lower the left and right rearview mirrors, so that you can see the two rear wheels, so that reversing is more convenient. When studying subject 2 at a driving school, you must also listen carefully to the instructor. Hope, thank you!
-
For a long time, there was no reversing image in the car, not even a reversing radar.
The driver reverses, but observes and judges the reverse through the rearview mirror outside the car and inside the car. If you are a novice, it is best to practice more and get off the bus if necessary to observe the actual situation.
-
There is no reversing image, this normal is to use the rearview mirror to reverse, in the past, the car was not equipped with a reversing image, all of them used the rearview mirror to judge the distance to achieve reversing.
-
When the car reverses without a reversing image, it is mainly done by looking at the left and right mirrors, and the feeling comes out after more practice.
-
If you don't have a reversing image, you need to use the rearview mirror to look behind and use the rearview mirror to judge the distance between the car and the obstacle behind you.
Most experienced drivers don't need to use a reversing camera.
When reversing, it is necessary to accurately judge the posture of the vehicle and the distance from the obstacle behind it. Reversing is actually not difficult.
When reversing, if you want the rear of the car to move to the left, turn the steering wheel to the left. If you want the rear of the car to move to the right, turn the steering wheel to the right.
When reversing, if you want to move the front of the car to the left, hit the steering wheel to the right; If you want to move the front of the car to the right, you should turn the steering wheel to the left.
Although some cars do not have a reversing camera, they are still equipped with a reversing radar that can help the driver determine the distance between the car and the obstacle behind it.
If there is no reversing radar, riders can install one at their own expense. It's easy to install a reversing radar.
When you usually use the car, if the reversing technique is not good, you must practice it often.
When reversing, you can find some lines on the ground buried fiber as a reference. When reversing, you can lower the left and right rearview mirrors, so that you can see the two rear wheels, which is more convenient for reversing.
When you study subject 2 at a driving school, you must also listen carefully to the instructor's lectures.
Millions of car purchases subsidize the hungry god.
-
Inverted image. Nowadays, there are more and more safety configurations on the car, such as reversing radar, reversing image auspicious code, 360-degree panoramic camera, etc. With these configurations, it is much more convenient for novice drivers to drive.
These high-tech features are not available in every car, such as the reversing camera. At present, most low-end models still only have rearing radar, and 360-degree panoramic camera is a configuration only available in luxury cars.
When we are reversing, if there is no reversing image, it is impossible to judge the specific distance between the rear of the car and the obstacle through the sound of the reversing radar. What should we do in this case? Don't worry, next Bian Xiao will share with you a trick for judging the position of the rear of the car with the naked eye.
Actually, the method is very simple. You can tell the position of the rear of the car by the right rearview mirror. First, find a parking space, align the wheels, and reverse.
At first, you can rest assured that you can boldly reverse. When the "Didi" sound on the radar is relatively rapid or you see an obstacle getting closer and closer through the rearview mirror, you should pay attention to the right rearview mirror. Here, we use the curb as a reference.
When we see from the right rearview mirror that the front door handle overlaps the rear curb, the distance between our rear and the curb is about 1m. At this point, we just need to step back a little.
There is no reversing image, no reversing radar, and the old driver has a trick to judge the rear position! Have you learned it now? However, this method of viewing through the right mirror also has a certain relationship with the driver's height, sitting position, and vehicle type.
More often than not, we can test ourselves first. When the door handle of our car overlaps with the curb, how far is the rear of the car from the curb? So that we can know in mind.
Millions of car purchase subsidies.
-
1. How to find a suitable parking space for reversing without reversing image, there is enough space reserved for the front and rear car parking positions, and most of the roadside parking spaces are large enough. Drive the car parallel to the car in front of you, keeping a distance of about 50 80 cm from the adjacent car at a distance of about 50 80 cm until the driver is facing the B-pillar of the adjacent car. 2How to reverse into R gear without reversing image and quickly kill the steering wheel to the right, and retreat to the car and the parking grid about 45 degrees, usually the left rearview mirror can see the rear car license plate, almost OK.
Quickly get back on the steering wheel and continue straight backwards. 3. How to reverse without reversing image, when the front of the car is in line with the front car and the tail, or open the window**, the left rear wheel is ready to enter the parking grid (this part really needs to be based on feeling), you can quickly 5, quickly beat the steering wheel to the left and continue to retreat, as long as the left front wheel enters the parking grid, you can return the steering wheel to the right, and then correct the position of the car is considered to be parked.
The phenomenon of black screen in the reversing image is likely to be due to poor line contact, and it is necessary to check the wiring between the line and the vehicle installation in time to see if there is a false connection. If there is, it will naturally lead to the situation that the reversing image is not working at any time, and even a direct black screen is possible, at this time, as long as the virtual part is connected well. Of course, it may also be because the power cord is aging, you can try to replace it with a new power cord, if the black screen can be solved, it means that there is indeed a problem with the power cord.
Installation steps: First, remove the power supply cable at the vehicle battery, and place the removed wire away from the electrodes to prevent the power supply from being accidentally connected. >>>More
Installing the Bowen Bowon reversing camera under normal circumstances, there are auxiliary lighting of license plate lights, small lights, and reversing lights, so it is rare that there will be no light source at all. The chip's camera is self-sensitive, which means that the more sufficient the light source, the better the effect of the chip's self-sensitivity adjustment, and the better the clarity will naturally be. If you're in total darkness and you can't see your fingers, even a multi-million night vision camera won't be what you'd expect. >>>More
Hello, the individual reversing image kit** is relatively cheap, and it is sold on all major online platforms. >>>More
This wiring is simple. The line that transmits the best signal is the coaxial cable, which we simply understand and is the same as the cable of the CCTV at home. After this kind of wire is opened, there will be two layers of sheath, and the outer sheath protects a circle of copper wire (shield, which can be understood as a negative electrode). >>>More