What to do if the old faucet is leaking, what to do if the faucet is leaking

1. If the old faucet is leaking, you can first remove the screws on the rotary switch with a screwdriver, and then remove the switch of the faucet.

2. Then take out the sealing rubber ring of the valve core inside, because the water leakage is generally caused by the rubber ring problem, you can adjust or change to a new rubber ring to improve the water leakage problem of the faucet.

3. If it is inconvenient to maintain, you can directly replace a new faucet.

Take a rough look at the leaking part of the faucet, and then remove the logo on the faucet switch, and you can see a Phillips screw, which is changed with a Phillips.

After unscrewing the screws, turn the faucet on and off with a wrench.

Remove (pull outward, if you can't pull it by hand, you can use a small hammer to gently knock it). What to do if the ordinary faucet leaks, in this way, you can easily solve the problem of faucet leakage!

2) What should I do if the faucet is leaking? The second step in this solution is to remove the faucet switch and remove the faucet core counterclockwise with a wrench.

3) Pick out the rubber ring at the top of the faucet core with a straight change cone. In this way, the leaking faucet will be somewhat relieved.

4) Use scissors to trim the 2 mm thick rubber into a rubber ring the same size as the faucet core. This is to help improve the situation of leaking water from the faucet.

5) Put the trimmed rubber ring into the faucet core, then install the original rubber ring, press the homemade rubber ring, and finally reinstall the faucet.

Vintage Faucet Leak Repair**Step 1

Prepare the tools first: tool materials, wrenches or pliers.

Scissors, cross-flower.

Screwdrivers, a piece of used bicycle inner tube.

Old-fashioned faucet leak repair**Step 2

First, turn off the main water switch.

Open one of the screw-covered covers on the faucet handle and remove the handle to reveal the Phillips screws.

Old-fashioned faucet leak repair**Step 3

Remove the handle with a Phillips screwdriver and set it aside to expose the spool combination.

Vintage Faucet Leak Repair**Step 4

Vintage Faucet Leak Repair**Step 5

Vintage Faucet Leak Repair**Step 6

Remove the spool combination by rotating counterclockwise with a wrench (without a wrench, replace it with pliers).

Vintage Faucet Leak Repair**Step 7

Vintage Faucet Leak Repair**Step 8

Disassemble the spool assembly carefully, be careful not to damage the parts, and check for damage. If there is no damage, it is because the parts are loose and cannot be sealed tightly. Now we can see how it is constructed, and we took the approach of making a ring leather pad out of an old inner tube and adding a plastic seal to the spool.

red ring) and the spool to increase the tightness of its contact.

Vintage Faucet Leak Repair**Step 9

Old-fashioned faucet leak repair**Step 10

Rub water (or honey, for a long time) on the inside of the spool plastic seal (red ring), imprint the watermark onto the inner tube segment, and cut out a ring leather pad along the blot, which I cut not very regularly.

Vintage Faucet Leak Repair**Step 11

If there is a finished leather cushion of the right size, it will be easy to eat.

Old-fashioned faucet leak repair**Step 12

Assembled in the original order, there is now an additional black annular leather cushion inside, and the combined spool is reinstalled, and the tightness is increased.

1. Causes of faucet leakage.

1. The reason for the leakage of the water outlet: it is caused by the wear of the shaft gasket in the faucet. Use pliers to loosen the gland and remove it, take out the shaft gasket with a clip, and replace it with a new shaft spacer.

2. The reason for water leakage in the lower part of the faucet: it is caused by the wear of the triangular sealing gasket in the gland. You can loosen the screws and remove the tie head, then loosen the gland and remove it, and then take out the triangular seal shop on the inside of the gland and replace it with a new one.

3. Water leakage at the joint of the pipe: Roughly the cap nut is loose, then you can re-tighten the cap nut or replace it with a new U-shaped gasket.

The faucet is invented for us to control water conveniently, it is a kind of switch valve, it will be more convenient in use, it can well control the water and the amount of water, the frequency of use of the faucet in life is very high, so the service life of the faucet will not be too long, especially some old-fashioned water faucets are more likely to have some problems, so what to do if the old-fashioned faucet leaks? Let's take a look with Qeeka Home experts.

1. What to do if the old-fashioned faucet is leaking.

The old faucet leakage can be removed with a screwdriver to remove the screw on the rotary switch, and then remove the switch of the faucet, and then take out the sealing rubber ring of the valve core inside, because the leakage is generally caused by the problem of the rubber ring, you can adjust or change a new rubber ring to improve the faucet leakage problem, if it is inconvenient to repair, you can directly replace a new faucet.

Second, what are the types of faucets?

1. Divide according to material.

Now there are many materials for faucet products, mainly stainless steel, all-copper material, cast iron material, plastic material, zinc alloy material, polymer composite material, etc.

2. According to the function.

The faucets used in different functional areas in the home are different, mainly basin faucets, bathtub faucets, shower faucets, sink faucets, electric hot water faucets, etc., among which basins, showers, bathtubs and other faucets are dedicated to the bathroom, while sink faucets and electric hot water faucets are more common in the kitchen.

3. According to the opening method.

There are many ways to open faucets, such as spiral, wrench, lift, induction, etc., among which spiral faucets are very common and can be applied to different occasions, and induction faucets are more common in public toilets.

Summary: The above is about what to do if the old-fashioned faucet is leaking, and what types of faucets are divided into, I hope the content shared can give you some reference, if you want to know more about related knowledge, you can **** Qijia Home to consult.

Water and electricity as the "cordon" of every family can not be touched, the faucet will be aged after a long time, there will be dripping, leakage, today we will tell youWhat to do if the faucet is leaking

First, the maintenance steps:

1. Preparation tools: a cross cone, a word cone, and scissors.

2. Take a look at the leaking part of the faucet, and then remove the trademark on the faucet switch, you can see a Phillips screw, unscrew the screw with a Phillips cone and remove the wrench of the faucet switch (pull outward, if you can't pull it out by hand, you can use a small hammer to gently knock it).

3. After the switch of the faucet is removed, use a wrench to remove the faucet core counterclockwise.

4. The rubber ring at the top of the faucet core is picked out with a word change cone. In this way, the leaking faucet will be somewhat relieved.

5. Trim the 2 mm thick rubber into a rubber ring the same size as the faucet core. This is to help improve the situation of leaking water from the faucet.

6. Put the trimmed rubber ring into the faucet core, then install the original rubber ring, press the self-made rubber ring, and finally reinstall the faucet.

Second, the maintenance steps:

1. Prepare tools: screwdriver, penetrating lubricating oil, carp pliers or adjustable wrench and the pad to be replaced.

2. Close the inlet valve and remove the small screws on or behind the faucet handle to remove the handle fixed on the faucet body. Some screws are hidden underneath metal buttons, plastic buttons, or plastic pieces that snap into or screw into the handle. As soon as you turn the scrambler button on, you'll see the handle screws mounted on the top.

If necessary, use some penetrating lubricant like WD40 spec to loosen the screws.

3. Lower the handle, check the parts of the faucet, remove the filling nut with a large carp pliers or adjustable wrench, being careful not to leave scratches on the metal. Turn the spool or shaft in the same direction you rotated when you turned on the faucet to unscrew them.

4. If necessary, use penetrating lubricating oil to loosen the screws of the screws. Inspect the screws and spool and replace them with new ones if damaged.

5. A new gasket that is exactly the same, replacing the old gasket and the new gasket that almost exactly matches the old gasket can generally make the faucet no longer drip water. You also want to notice whether the old washer has a bevel or a flat one, and replace it with the same new washer. Gaskets designed for cold water only expand violently when hot water flows through, clogging the outlet and slowing down the flow of hot water.

Some gaskets will work in both hot and cold water, but you want to make sure that the gasket you buy for replacement is exactly the same as the original.

6. The gasket is fixed to the valve core, and then the parts in the faucet are reinstalled and rotated in the clockwise direction. Once the spool is in place, reattach the fill nut. Be careful not to leave scratches on the metal with the wrench.

7. Install the handle and put the button or disc back on the water supply to check whether there is any leakage.

If you find a leak in the faucet at home, remember to close the water valve at the first time, and then ask the maintenance master to repair it to avoid the leakage getting worse.

If there is a leak at the faucet joint, if the water-stopping tape on the faucet part is damaged. The faucet can be removed using a wrench and a new roll of water-stopping tape is applied from the spot where the screws are fixed.

Specific steps: 1. First of all, tie the faucet tightly and turn the faucet off in a counterclockwise manner with a plier.

2. Turn the threaded hole outward, and roll the threaded part with wind printing tape 5-6 times along the clock.

3. See if the faucet is adjusted and tied in the direction of the clock with water tether pliers.

4. After the installation is completed, turn on the main switch to confirm whether there will be water leakage.

If the faucet is found to have less water, it may be a water leakage, because the water-stop disk of the single-gun faucet is stuck in the sand, this phenomenon is still to find a professional repairer to disassemble the faucet to clean up, but if the rubber pad is damaged, it must be replaced.

Generally speaking, the correct use of the faucet means not to rotate the faucet too tightly, and the faucet rubber mat can maintain the life of the year.

Buy an inner core for 3 yuan in Pinduoduo and replace it, it is new.

1.If the valve core is leaking, unscrew the nut and replace the valve core; 2.If the gasket is worn, find a towel or rag, cover it on the faucet, unscrew the switch with pliers, remove some small screws after removing the handle, you can see the internal valve core, remove the valve core with a wrench, and replace it with a new gasket; 3.

The nut is loose, the faucet pipe joint leaks, generally the faucet switch is water seepage, mainly due to the loose cover nut, just replace it with a new nut.