What is the home remedy for white mold in longevity flowers?

Longevity flowers. If there is white mold on it, you can spray it with sterilel once a week, usually after 3-4 sprays in a row, the plant will return to normal.

Before spraying the longevity flowers, it should be moved indoors, in a shading and ventilated environment, to avoid the damage to the plants aggravated by strong light, and pay attention to the maintenance of longevity flowers in the later stage, it should be placed in an environment with high humidity and sufficient light, so that the plants can fully photosynthesize.

When changing the environment for the longevity flowers, use sterilized sharp scissors to whiten the plants.

Cut off the part with more mold to inhibit the spread of germs, and pay attention not to splash water on the wound of the longevity flower after pruning, otherwise the wound of the plant will gradually rot.

Precautions for planting longevity flowers.

It should be noted that kalancho flowers are masculine flowers, and placing them in a well-lit location in winter and spring will promote the opening of the flowers. During midsummer dormancy, avoid direct sunlight and place it in a bright, diffused light.

Watering: Longevity flowers contain more water in their bodies and are more resistant to drought, so they do not need a lot of watering. Just keep the soil moist.

Watering should master the principle of dry and thorough watering, not to make the potting soil accumulate water for a long time, long-term water accumulation will cause rotten roots, leaves will also appear yellow spots, will shorten the flowering time.

The above content refers to Encyclopedia - Longevity Flower.

If it is only a small amount of downy mildew, you can use baking soda to wipe the leaves, put it in time to ventilate, have scattered light in the environment to maintain, avoid water accumulation, do not fertilize for the time being. If it is severe, use fungicide, spray the leaves, once every 3 to 5 days, three times in a row.

White, slightly sticky bugs growing on the kalancho flowers may be mealybugs.

It is a type of scale insect that gathers on the stems and leaves of the plant, sucks the sap in it, and hinders the normal growth of the plant. When mealybugs are found, they need to be brushed off the plant with a toothbrush dipped in water. Then prepare some drugs such as flower protector and cocoon to spray the plant for insect control.

Longevity flower maintenance method:

1. Soil requirements.

Longevity flowers have higher requirements for soil, suitable for growing in soft, well-drained soil, and should be replaced with potting soil every 1-2 years to prevent soil compaction, and can be mixed with humus, mud and fine gravel.

2. Sufficient light.

When maintaining longevity flowers, it is necessary to ensure that the light is sufficient, let the plants receive 6-8 hours of light every day, and often rotate the pots and adjust the position of receiving light, so that the longevity flowers can receive sunlight evenly and promote the uniform growth of branches and leaves.

3. Reasonable watering.

In the process of maintenance, the soil should be kept dry, and every time you water it must be watered thoroughly, in addition, when the weather is hot, you can spray water mist around the longevity flower.

4. Prune branches and leaves.

In the peak season of longevity flowers, it is necessary to pluck the tops in time, remove the dense shoots and side branches, and promote the germination of new branches of the plants, and after the longevity flowers wither, the residual flowers should be cut off, so as not to affect the flowering effect in the later stage.

Hello, that's a greasy bug. The reason is that there is no ventilation in the house. Tell you that a trick is particularly useful, mash the garlic, soak it in water and hand it over 1 or 3 times. If it is serious, use the cut garlic clove to wipe it directly, and it will be effective at one time.

Thank you for your question. Thank you so much.

The longevity flowers are hairy and white like mold, and the flowers are severely polluted and slowly rot. It's powdery mildew.

This is a disease caused by a fungal infection, and its spores are contagious due to contact between plants or from plant to plant by wind, and once found, it must be isolated from other plants. If only one bud is infected at the beginning of the disease, then the infected part can be removed in time.

The pathogen is Powdery mildew monofilament. Germs spread through the air. The appropriate temperature of the disease is 15 28, when the conidia are above 30 or below 1, they quickly lose their vitality, and the air humidity is not strict, and the onset humidity of 45% and 75% can occur, and 80% and 90% are the most suitable.

Plants that are too dense, poorly ventilated, over-applied nitrogen fertilizer, and poor plant growth are all prone to disease.

When the cultivated area is cultivated at high temperature and poor ventilation, the lower old leaves are seriously diseased. Open field cultivation is popular in summer and autumn when it is dry, cloudy, sunny and rainy. Too much nitrogen fertilizer, or weak growth, severe disease.

Longevity flowers with white hair are infected with germs, that is, powdery mildew, and they are prone to this disease when raised in a poorly ventilated environment. Medications should be used immediately as soon as the disease occurs**.

You can use 65% zeb wettable powder and spray it evenly on the plant. The disease can be transmitted, so it must be treated as soon as it is detected, otherwise the area of disease will be larger.

1. High temperature and high humidity: The environment of high temperature and high humidity is easy to breed bacteria, and longevity flowers are easy to suffer from bacteria in such an environment. Therefore, when cultivating longevity flowers, it is necessary to choose an environment with suitable temperature and humidity so that longevity flowers can grow healthily and vigorously.

2. Stuffy and unventilated: The stuffy and unventilated environment is convenient for bacteria to multiply, creating favorable conditions for bacterial reproduction. Therefore, when cultivating longevity flowers, they need to be placed in a well-ventilated and sunny position, so that the plants are healthier.

3. Excessive nitrogen fertilizer: The main role of nitrogen fertilizer is to promote the growth of plant branches and leaves. Therefore, when cultivating longevity flowers, it is necessary to fertilize reasonably and supplement various elements at the same time.

The leaf surface of the longevity flower is yellow, peel it open to look at the roots, and then soak it, and the plant gradually recovers.

Longevity flowers. The origin is in Africa, so the longevity flower likes temperature, and it is better to put it in a sunny environment to help the growth of longevity flowers, but in the summer, the temperature is too high to exceed 30 degrees, otherwise it has been exposed to the sun. Kalancho flowers are very cute because of their excellent meaning, small plants, and bright and dense flowers.

However, growing longevity flowers indoors is particularly susceptible to mycosis, also known as powdery mildew. Especially now that it is the rainy season.

This rain is endless, even as many as ten days and half a month, it is difficult to see the sun, the temperature is high, the weather is very humid, everything is easy to mold, not to mention flowers and plants, so because the longevity flowers receive less light, the humidity in the air is high, and the mycosis of longevity flowers comes from this.

So what to do if you have mycosis in longevity? Here are some things we can try.

1.If we can detect the disease of the longevity flower as soon as possible, we can strangle the mycosis in the cradle, so if your longevity flower is relatively mild, then you can prune the leaves that have mycosis first, and then wipe the other leaves with alcohol at home to prevent the spread of mold.

2.Spraying sterilizer, which can be regarded as a special drug for mycosis, can be quickly absorbed by longevity flowers after spraying, so as to achieve the effect of eliminating mold.

3.In fact, sulfur powder is toxic to powdery mildew, so it can effectively kill the fungus in longevity flowers, so if you have some sulfur powder stored at home, it is also a good way to treat the mycosis of longevity flowers.

In fact, the most important thing is to ventilate and bask in the sun for longevity flowers, so as to prevent longevity flowers from getting sick, although most of them are rainy days recently, but once you see the sun, you have to move the longevity flowers to the sun and let it dry more, I feel that people are going to mold in this weather, not to mention your longevity flowers.

1.Wiping with alcohol can be a good disinfection. 2.Exposure to the sun will inhibit germs. 3.It is necessary to pay more attention to maintenance, ensure sufficient sun exposure and appropriate amount of moisture, and disinfect it frequently.

We should put it in a sunny place, and then water it regularly, fertilize it reasonably, and ensure its ventilation.

You can go to some green plant stores and ask the owner if there is a fungicide, now the flowers can also be sprayed with fungicide, just spray the fungicide.

Longevity flowers on the white mold, can be sprayed once a week sterilizer, usually sprayed 3-4 times in a row, the plant will return to normal, before spraying the agent, to put the longevity flowers into a cool and ventilated environment, the use of sterilized scissors, the plant on the white mold more branches and leaves, in order to prevent the spread of germs.

1. Spray the agent

The white mold on the longevity flower can be sprayed with pesticides, spraying should use sterilization and powder can be reached, interactive use, to avoid plant resistance to the agent, pay attention to spraying should not be too frequent, each spraying needs to be spaced 7 days, otherwise it will affect the growth of longevity flowers in the later stage.

2. Swap environments

Before spraying the longevity flower, it should be moved indoors, in a shady and ventilated environment, to avoid the damage to the plant aggravated by strong light, and pay attention to the maintenance of longevity flowers in the later stage, it needs to be placed in an environment with high humidity and sufficient light, so that the plants can fully photosynthesize.

3. Prune

When changing the environment for the longevity flower, it is necessary to use sterilized sharp scissors to cut off the part of the plant with more white mold to inhibit the spread of germs, pay attention to the water after pruning, do not splash water on the wound of the longevity flower, otherwise the wound of the plant will gradually rot.

4. Replenish water

When the longevity flower resumes growth, it should be watered once to make the soil in a moist state, promote the growth and development of branches and leaves, pay attention to the later maintenance, you need to replenish water for the longevity flower every 3-4 days to keep the potting soil moist.

Longevity flowers are caused by powdery mildew, which will stop the growth of the plant, and in severe cases, the leaves may wilt and even die as a whole. ** The diseased leaves should be removed, and evenly sprayed with 65% zeb wettable powder or 15% 1000 times of powder, and the ventilated environment should be maintained during the period.

Longevity flower long white hair is actually a kind of powdery mildew, when the disease mainly invades the leaves and stems of the plant, and then there will be white powder, the disease is mild will lead to stop growing, serious will lead to leaf wilting, the whole plant wilting phenomenon.

First of all, when the occurrence of powdery mildew is relatively mild, some diseased leaves are removed in time, and then the whole plant is pruned to ensure a certain permeability and light transmittance. Finally, it is placed in a relatively ventilated environment to avoid the recurrence of the disease.

When the onset of powdery mildew is more serious, it is necessary to spray with drugs in time. For example, 65% zeb wettable powder can be used and evenly sprayed on the plant. In addition, 15% powder-rust 1000 times solution or 10% polyantimycin 1000 to 1500 times solution can also be used.

After the disease is eliminated, it is necessary to maintain and manage it, such as maintaining the optimal growth temperature of 15-25 degrees Celsius and receiving 6-7 hours of light every day. Watering in moderation, keep the potting soil slightly dry, and no stagnant water will be generated. Apply organic liquid fertilizer regularly, and do not apply thick fertilizer and raw fertilizer.